The LeckOmiO is a combination device for various applications in the gas installation. It Allows detection of smallest gas leaks as well as rapid and precise pressure measurements, ease of use and a wide range of applications. Through the display of minimum and maximum values??, as well as measurement times and start and end pressures in pressure tests, it offers numerous advantages in handling. The following operating modes are selectable from the menu:

Pressure Test display of starting pressure, final pressure, measurement time and pressure drop, as well as minimally and maximum pressure value.

Regulator Test display of the outgoing pressure, closing pressure, safety pressure release valve response pressure and leak-proof completion, upper and lower deactivation of safety shut-off valve and leak-proof completion.

Load test according to TRGI Menu-driven procedure with individual Adjusting of the measuring time to the requirements of the TRGI load testing

Tightness test according to TRGI Menu-driven procedure with individual Adjusting of the measuring time to the requirements of the TRGI tightness testing

Building inspection detection of smallest leaks in plumbing lines and connections. In addition to the optical and acoustic signal a vibration alarm is available.

Settings Custom configuration of the operating parameters such as the measuring unit, automatic switch off or the duty cycle of the backlight to the user�s requirements.

Adjustment Sensor sensitivity test and calibration of the device according to DVGW Note G 465-4 by applying test gas and set point adjustment by pressing a button

Features:

Rugged hand-held instruments with ergonomic aluminum housing
Wide range of applications in the gas and water installation
Load- and tightness tests according to TRGI
Powerful gas detector with vibration alarm and digital display reading for gas leak detection
High contrast LCD display with backlight for an optimal presentation of all measured values
Easy replacement of batteries with innovative battery Management
Systematic evaluation of the measured data using Esders PC-1 software
Graphical printout on site on mobile printer
Simple operation with intuitive menu navigation Practical accessories for all applications

Alte produse ESDERS

ESDERS VACUUM-PROBES-SYSTEM VSS 15

• Complete with connection cable and metal plug
• Stainless steel design with coarse filter and integrated water barrier
• Complete with connection cable and metal bush

ESDERS GOLIATH BIOGAS ANALIZOR DE BIOGAZ

• Use of infrared sensors for CH4 and CO2 guarantee fast run-in period and extremely short response times and exclude cross-sensitivities to other gases.
• An oxygen and a hydrogen sulphide sensor are offered as an option.
• The measurement range for H2S is 0 to 2,000 ppm and cover the requirement for measurements at biogas plants ideal.

ESDERS GASTEST DELTA3 TESTER GAZ CONFORM DVGW-TRGI 2008

• Usability test in accordance with G5952 or Esders express procedure
• Leak detection via external, digital hand sensor with integrated calibration and vibration alarm
• Automatic and manual test on controllers and safety valves
• Leak test with 150 mbar, strength test with 1 bar
• Pressure measurement up to 25 bar via external sensors

ESDERS VAKUMOBIL

• The Esders Vakumobil has a markedly improved suction power compared to conventional technology.
• The low pressure in the surface generated by one suction probe has an impact over several metres.
• This creates only a movement or distortion of the gas accumulation but not there elimination.

ESDERS VIBRAGAS EX TESTER GAZ U CERTIFICARE EX

• Easy replacement of batteries with innovative battery Management
• Systematic evaluation of the measured data using Esders PC-1 software
• Graphical printout on site on mobile printer
• Simple operation with intuitive menu navigation
• Practical accessories for all applications

ESDERS MULTI GAS DETECTOR H2S CO O2 LEL

• 2 month battery life on a single charge (infrared version)
• Compact and lightweight
• Low maintenance cost
• Simple to use
• LEL sensor (IR) does not require oxygen

ESDERS LECKOMIO DETECTOR PORTABIL DE SCAPARI SCURGERI GAZ METAN

• Rugged hand-held instruments with ergonomic aluminum housing
• Wide range of applications in the gas and water installation
• Load- and tightness tests according to TRGI
• Powerful gas detector with vibration alarm and digital display reading for gas leak detection

ESDERS TONI GASTEST CH4 DETECTOR SCURGERI GAZ METAN

• Interval de măsurare: 0 - 10.000 ppm metan
• Timp de răspuns foarte rapid
• Robust, portabil, cu protecţie IP64
• Alarmă de vibraţii şi afișaj digital
• Fabricat în Germania

ESDERS GAS STANDPIPE - SISTEM TESTARE TEAVA DE EVACUARE GAZE

• Practical system with wide application
• Easy adaptation to many thread sizes, drilling saddles and fittings -directly or via electrically conductive tube
• Rapid extraction of gas by using the Venturi nozzle
• Flame arrestor for burning off the gas safely

ESDERS SAFE ETHANTEST TESTER GAZ ETAN

• Taking the service box to the measurement site
• Activate device and connect sensor
• Feed sensor into sensor hole and start analysis at the touch of a button
• SAFE absorbs a gas sample and displays its concentration in vol.%
• The gas sample passes through the chromatographic column and the display of methane and ethane (if applicable) takes place