Lab Reference Recorder

The nVision Lab Reference is a pressure reference recorder accurate enough to function as a laboratory deadweight tester replacement and a high-accuracy, high-frequency chart recorder. Download data as you test, view your data on the built-in LCD, and store up to 1,000,000 data points.

Features:

Gauge / Absolute Pressure Datalogger to 15 000 psi / 1000 bar / 100MPa
Differential Pressure with up to 0.025% of reading accuracy
Switch, Voltage, Current, and Temperature
500 000 data points - 10 readings per second from 2 modules

Alte produse AMETEK

AMETEK M1 DIGITAL PRESSURE GAUGE

• Easy to read extra-large numbers
• Protective boot included
• Shifts everyday wear to a replaceable CPF adapter

AMETEK PTC PROFESSIONAL TEMPERATURE CALIBRATOR

• Temperature range from -90 to 660°C (-130 to 1220°F) with 5 models
• Accuracy to ½ 0.06°C and Stability to ½ 0.01°C
• Clean Dry block calibrator
• Time saving fast cooling and heating times (350° in only 7 minutes)

AMETEK AMC910 PROCESS CALIBRATOR

• Read voltage (10V and 100V DC ranges to ½ 0.005%)
• Read current (0 to 50mA to ½ 0.01%)
• 24VDC loop power supply
• Selectable 250 ohm HART resistor

AMETEK ASC-400 MULTIFUNCTION CALIBRATOR

• Recall saved tasks for both upper & lower windows
• Fuseless Protection
• Inputs for Thermocouple Calibration

AMETEK MACAL LOOP CALIBRATOR

• Source and Measure current to 24 mA with ½ 0.05% of full scale
• Measure voltage from 0 to 45 VDC with ½ 0.5 VDC
• 200 hours of life using 4 x AA batteries

AMETEK HPC40 SERIES PRESSURE CALIBRATOR

• High Accuracy Thermometer with "True Ohm" Technology
• Store & Recall Previously Used Screens
• Flexible Power Options Including Rechargeable

AMETEK ETC EASY TEMPERATURE CALIBRATOR

• Accuracy to ½ 0.5°C and Stability to ½ 0.05°C
• Time saving fast cooling and heating times
• Easy-to-read multi-information display

AMETEK ITC INDUSTRIAL TEMPERATURE CALIBRATOR

• Dry block calibrator
• Easy-to-read, backlit display with useful icons
• Lightweight and easy to carry
• Multi-hole insert kits

AMETEK HPC600 PRESSURE CALIBRATOR

• Voltage Measurement
• Serial Communication
• External Pressure Module Compatibility

AMETEK CSC SERIES MULTIFUNCTION CALIBRATORS

• Measure Current to 24mA with ½ 0.01 % of reading accuracy
• Measure Voltage to 30VDC with ½ 0.01 % of reading accuracy
• 24VDC Loop Power Supply
• User defined step and ramp functions