Display (LCD, Digital Counts)	3999
AC Current Accuracy (400A Reference)	1.0+3(50/60Hz) 2.0+3(40~1kHz)
AC Current Accuracy (2000A Reference, 0~1500A)	1.0+3(50/60Hz) 3.0+3(40~1kHz)
AC Voltage Accuracy (40/400V/750V Reference)	1.0+2(50/60Hz) 1.5+3(40~1kHz)
DC Voltage Accuracy (40/400V/1000V Reference)	1.0+2
Resistance Accuracy (400/4k/40k/400kO reference)	1.5+2, Beeps at below 50± 35O (continuity check)
DC Output Accuracy (400A, 0~400mV Reference)	.5?% rdg ± 0.5mV (50/60Hz) .5% rdg ± 0.5mV (40~1kHz)
Method of detection	Mean Value
Response Time	Approx. 2 seconds
Range Switching	Manual-range (on AC current range) / Auto-range (on AC voltage range, resistance range)
Data hold	On all range
Operating temperature and humidity	0-40°C, 85% RH or less (no condensation)
Influence of external magnetic field	1A or less at 400A/m
Influence of conductor position	± (2% rdg + 3dgt) or less
Safety Standard	Conforms EN 61010-1, EN61010-2-031, EN61010-2-032
Circuit voltage	1000Vrms or less
Withstanding voltage	5.55kV AC for one minute
Power Supply	R6P(SUM-3)x2 or LR6x2
Battery Life¹	150 hours
Consumed current	Approx. 5mA
Sleep Function	Automatically powered down in about 10 minutes after the last switch operation
Diameter of measurable conductor	54mm at maximum
Dimensions	Approx. 105(W) x 247(H) x 49(D)mm
Weight (Approx.)	470g
Accessories	Clamp Adapter (Model 99025), Output Cable for Terminal Screw (Model 91019), Carrying Case (Model 93034), Output Plug (Model 98012), Test Lead (Model 98011), User's manual (IM CL150), batteries
Order Notes	Each item selected MUST be ordered as a separate line item.
Product Notes	All Clamp-on Meters include Test Leads (where applicable) and a carrying case.

More products YOKOGAWA

YOKOGAWA - PROCESS CALIBRATOR CA300 SERIES CA310 CA320 CA330

• Basic Accuracy: 0.015% (Source&Meas. accuracy of Voltage mA)
• Simultaneously supplies 24V loop power and measure output signal with high accuracy
• Sub display displays span% of the source value
• HART/BRAIN comm. resistance (250O) embedded

YOKOGAWA AQ6373B VISIBLE WAVELENGTH OPTICAL SPECTRUM ANALYZER 350 - 1200 NM

• Max safe input power: +20 dBm
• Level sensitivity: -80 dBm
• Dynamic range: ?60dB
• Single-mode, Multimode, and Large-core fibers
• Built-in optical alignment source

YOKOGAWA - PX8000 PRECISION POWER SCOPE

• Provides simultaneous voltage and current multiplication to give real-time power sampling.
• Trend measurements between waveforms can be calculated by mathematical functions (up to four million points).
• Supports the capture of power parameters over specific periods of time through the definition of start and stop "cursors".
• An always-active History function automatically records up to 1,000 historical waveforms.

YOKOGAWA AQ2211 FRAME CONTROLLER (3 SLOTS)

• Easy-to-view color display
• USB port for data storage
• Measurement module "hot-swapping" capability
• Remote monitoring and measurement through a LAN

YOKOGAWA - DIGITAL MANOMETER MT220

• Measurement with DCV and DCA
• 24 V DC output
• Percent reading
• Error reading
• Measurement data memory

YOKOGAWA AQ2170 SERIES PORTABLE OPTICAL POWER METER (SIMPLE & COMPACT)

• Two versions of Power Meters to suit test application
• Compact and lightweight
• Rubber protector to prevent damage when dropped

YOKOGAWA AQ6370D TELECOM OPTICAL SPECTRUM ANALYZER 600 - 1700 NM

• High wavelength accuracy: ±0.01nm
• High wavelength resolution: 0.02nm
• Wide dynamic range: 78dB typ.
• Wide level range: +20 to -90dBm

YOKOGAWA CLAMP-ON TESTER CL220 (AC/DC 300A)

• AC/DC current measurements with current ranges up to 300A
• 24mm in diameter of measurable conductor
• Light weight & compact design
• Mean value display
• Sleep function

YOKOGAWA CLAMP-ON TESTER CL135 (TRUE RMS, ACA, ACV, 600A)

• AC current measurement with current ranges up to 600A
• AC voltage and resistance measurements
• 30mm in diameter of measurable conductor
• True RMS Display
• Data hold function

YOKOGAWA DIGITAL RESISTANCE METER 7556

• Wide operating rangeability (1 Ohm range to 100 M Ohm range)
• Full remote controlability via the standard RS232C serial, or optional GP-IB interfaces
• Software based calibration
• Printer output of measurement, and statistical analysis results