RF Signal Generator 150 kHz..2 GHz TTi TGR2050

• Wide voltage and current range, 0 to 80 V and 0 to 80 A
• 300 watts continuous dissipation at 40 degrees C
• Versatile solution for testing dc power sources

 

• Single outputs, 35V/5A, 18V/10A, 42V/10A, 20V/20A
• Dual or triple outputs, 35V/4A
• Independent digital voltage and current meters for each output
• 4 digit resolution

 

• 16 MHz sine and square
• Dual channel independent or linked
• 40 MSa/s sample rate
• 12-bit vertical resolution

 

• Extends the output range of function generators
• 30 Volts peak to peak output swing
• DC to 1MHz bandwidth
• High impedance input, 0dB to +20dB gain
• 50 Ohm and 600 Ohm outputs
• 20dB swtitchable output attenuator

 

• 10 MHz ..26.5 GHz bandwidth
• Measurement range from -50 dBm to +20 dBm
• Replacement solution for conventional power meter and sensor combination
• Simple USB connection to laptop or PC
• Use multiple sensors on one laptop or PC

 

• 0.001Hz to 20MHz frequency range
• 6 digits or 1mHz resolution
• 1ppm stability and 10ppm one year accuracy
• USB and RS232 Interface

 

• CPX200 - compact dual output 2 x 175 watts
• CPX400A - compact dual output 2 x 420 watts
• CPX400D - compact dual output 2 x 420 watts
• CPX400DP- programmable dual output 2 x 420 watts

 

• 10 MHz ..12.4 GHz bandwidth
• Measurement range from -50 dBm to +20 dBm
• Replacement solution for conventional power meter and sensor combination
• Simple USB connection to laptop or PC
• Use multiple sensors on one laptop or PC

 

• 10MHz to 3600MHz or 6000MHz frequency range
• Resolution bandwidths from 300Hz to 10MHz (1:3:10)
• -120dBm typical noise floor at -40dBm ref. level/10kHz RBW
• Measurement in dBm or dBuV, mV or uW
• Zero span mode with AM and FM audio demodulation
• Trace modes of normal, peak hold and trace average
• USB interfaces for Flash drives and PC connection

 

• Provides an EN61000-3-2 compliant source
• 1000W power capability at 230V
• Up to 4·4A rms load current and up to 10A peak currents