Hand-held low cost Frequency Counter 8.5 digit 3 GHz TTi PFM3000

• 10MHz to 6000MHz frequency range
• 10Hz setability, +/-1ppm frequency stability
• Locking to external frequency standard
• -110dBm to +7dBm amplitude, 0.1dB steps
• Full remote control through RS232, USB, LAN and GPIB

 

• DC to 3 GHz range, 0.001mHz resolution
• Large 10 digit display with full range of annunciators
• Internal rechargeable batteries for portable use
• AC or DC coupling, 1M/50Ohm selection, polarity invert

 

• 0.003Hz to 3MHz frequency range
• High waveform quality at all frequencies & levels
• 2mV to 20V pk-pk from 50 Ohms or 600 Ohms

 

• 10MHz to 3600MHz or 6000MHz frequency range
• Resolution bandwidths from 300Hz to 10MHz (1:3:10)
• -120dBm typical noise floor at -40dBm ref. level/10kHz RBW
• Measurement in dBm or dBuV, mV or uW
• Zero span mode with AM and FM audio demodulation
• Trace modes of normal, peak hold and trace average
• USB interfaces for Flash drives and PC connection

 

• 10 MHz to 1 GHz frequency range
• 1 kHz setability, +/-2ppm frequency stability
• -127 dBm to +7dBm amplitude, 0.1dB steps
• FM modulation, internal or external

 

• 5½ digits (±210,000 counts), auto/manual range
• 1µV, 1nA, 1mOhm resolution, 0.012% accuracy
• Wide range of computing functions included
• Automatic data logging functions included
• Integral True RMS AC converter

 

• 0.1Hz to 10MHz frequency range
• Independent control of pulse frequency, width and delay
• 50ns minimum pulse width
• Squarewave, double pulse & delayed pulse modes
• Free-run, gated and triggered modes
• 50 Ohm output: 0.1V to 10V amplitude

 

• Single outputs, 35V/5A, 18V/10A, 42V/10A, 20V/20A
• Dual or triple outputs, 35V/4A
• Independent digital voltage and current meters for each output
• 4 digit resolution

 

• 3 Hz to 3 GHz in two overlapping ranges
• Large 8.5 digit display with full range of annunciators
• Battery operation and lightweight, handheld format

 

• 10 MHz ..26.5 GHz bandwidth
• Measurement range from -50 dBm to +20 dBm
• Replacement solution for conventional power meter and sensor combination
• Simple USB connection to laptop or PC
• Use multiple sensors on one laptop or PC