Active Differential Probe for Oscilloscopes 100MHz Testec TT-SI

Description

TT-SI 9101  1:10 / 1:100, 100MHz

Bandwidth: 100MHz

Attenuation Ratio1: x10 / x100

Accuracy: ± 2%

Rise Time: 3,5ns

Input Impedance: 4Ω, 7pF

Only connect to a grounded oscilloscope!

Input Voltage

Differential Mode

            x10: +-70V (DC + peak AC) or 70Vrms

            x100: +-700V (DC +peak AC) or 700Vrms

Common Mode

            x10: +-700V (DC + peak AC) or 700Vrms

            x100: +-700V (DC +peak AC) or 700Vrms

Absolute max. Voltage

            x10: +-1400V (DC + peak AC) or 1000Vrms CAT III

            x100: +-1400V (DC +peak AC) or 1000Vrms CAT III

Output Voltage

            Swing: ± 7V (into 50kW load)

            Offset (typical): <± 5mV

            Noise (typical): 0,9mVrms

            Source Impedance: 50W

            CMRR (typical): -85dB@50Hz, -50dB@1MHz

TT-SI 9110  1:100 / 1:1000, 100MHz

Bandwidth: 100MHz

Attenuation Ratio: x100/x1000

Accuracy: +/-2%

Input Impedance: 4Ω, 7pF

Only connect to a grounded oscilloscope!

Input Voltage

Differential Mode

            x100: +-140V (DC + peak AC) or 140Vrms

            x1000: +-1400V (DC +peak AC) or 1000Vrms

Common Mode

            x100: +-1400V (DC + peak AC) or 1000Vrms

            x1000: +-1400V (DC +peak AC) or 1000Vrms

Absolute max. Voltage

            x100: +-1400V (DC + peak AC) or 1000Vrms CAT III

            x1000: +-1400V (DC +peak AC) or 1000Vrms CAT III

Output Voltage

            Swing: +-1,4V (into 50kΩ load)

            Offset (typical): <+-5mV

            Noise (typical): 0,6mVrms

            Source Impedance (typical): 50Ω

            CMRR (typical): -80dB@60Hz, -50dB@1MHz

Power requirements: 4x AA Cells or Mains Adaptor 6VDC/200mA or regulated 9VDC/120mA

Dimensions (LxWxH): 207 mm x 83 mm x 38 mm

Length: BNC Cable 90 cm - Input Leads 30 cm

Weight: 500 g

Accessories: we recomend mains adaptor TT-SI NT