The TBMDA1 modulated wideband driver amplifier is designed in order to create an inexpensive signal source for immunity testing of electronic building blocks and products. It is designed to be driven by the tracking generator output of spectrum analyzers. With its gain of 22 dB and 1dB compression point of +22dBm, it can boost the output power of a tracking generator up to 150mW. The TBMDA1 is ideal to drive Tekbox near field probes in order to find the sensitive spot of an electronic circuit or to create electric fields up to 50V/m when driving the Tekbox TEM Cell TBTC1, 25V/m when driving the TBTC2 or 18V/m when driving the TBTC3. Test signals for immunity testing can be CW, AM or PM. Consequently, the TBMDA1 provides built in modulation capability to generate 1kHz AM or PM signals. In PM mode, the TBMDA1 can also generate a 217Hz Signal with 12.5% duty cycle in order to simulate mobile phone TDMA noise.

Features:

Pre-compliance RF immunity testing, driving Tekbox EMC probes or TEM cells
RF driver amplifier
General purpose wideband RF amplifier

More products TEKBOX

TEKBOX TBFL1 TRANSIENT LIMITER

• Frequency range: 9 kHz ½ 600 MHz
• Attenuation: 10 dB ½ 0.5/+1.2 dB in-band (9 kHz to 600 MHz)
• Attenuation HP-filter: > 30 dB @ 2kHz
• Maximum continuous RF input power: 5W (+37 dBm) in-band

TEKBOX TBMDA1 RF AMPLIFIER

• Pre-compliance RF immunity testing, driving Tekbox EMC probes or TEM cells
• RF driver amplifier
• General purpose wideband RF amplifier

TEKBOX TBVNA-6000 6GHZ VECTOR NETWORK ANALYZER

• EMI Analyzer 1 Hz "" 110 MHz (Measurement Receiver)
• Spectrum Analyzer
• Tracking Analyzer 1 Hz "" 110 MHz
• Noise Analyzer 1 Hz "" 110 MHz
• Oscilloscope 250 MS/s, DC "" 110 MHz

TEKBOX TBHDR1 RF AMPLIFIER

• General purpose gain block
• Pre-amplifier in applications with low noise and high IP3 requirements
• Pre-amplifier for spectrum analyzers, especially in EMC pre-compliance test applications
• Loop antenna amplifier

TEKBOX TBOH01 5UH LINE IMPEDANCE STABILISATION NETWORK LISN ½ CISPR 25

• Frequency range: 100kHz ½ 110MHz (1GHz, see figure 4 in the manual)
• DC Resistance: 40 mO
• Maximum current: 10A
• Nominal operating voltage range: 0 ½ 60V DC *

TEKBOX TBLC08 50UH LISN LINE IMPEDANCE STABILISATION NETWORK LISN ½ CISPR 16

• Air core inductors
• Line voltage: max. 240V / 50 ½ 60 Hz, CAT ?
• Max. current: 8A @ 23°C
• DUT socket: country specific

TEKBOX TBOH02 SELF POWERED ACTIVE LOAD

• Operating voltage range: 2V ½ 70V
• Maximum current: 10A
• Power rating: max. 25W continuously; with additional fan 100W continuously
• Ranges: 0A ½ 1A, 0A ½ 10A, 1O ½ 10O, 10O ½ 100O
• External voltage control input

TEKBOX TBPS01 EMC NEAR-FIELD PROBES + TBWA2 WIDEBAND AMPLIFIER

• Slim design for good access in between tightly spaced components
• Shielded loops to avoid picking up common mode noise; insensitive to the human hand
• Frequency range: up to 6GHz, see coupling plots of the respective probes
• SMB connectors to avoid twisting the RF cable when scanning DUTs

TEKBOX TBLM1 LISN MATE

• Frequency range: 30 kHz ½ 110 MHz
• Maximum RF level at any BNC port: 27dBm
• Maximum DC current at any BNC port: 30 mA

TEKBOX TBWA2/20DB, TBWA2/40DB RF AMPLIFIERS

• EMC probe amplifier
• General purpose wideband RF amplifier