The TBVNA-6000 two-port Vector Network Analyzer offers numerous features to allow a detailed analysis of RF devices and components. With a bandwidth ratio of 1 : 6000000000 the instrument covers measurement applications from audio to RF frequencies. Through its fully DC coupled active VSWR bridges, measurements down to 1Hz are possible without sacrificing accuracy. The instrument uses four independent measurement channels simultaneously for accurate and fast two port measurements.

A rich set of software utilities like spectrum analyzer or oscilloscope make this instrument a versatile helper in development or test applications.

Promotion "" free BODE-analyzer option until 31.12.2025

SPECIFICATIONS

0.1 Hz "" 6 GHz Vector Network Analyzer
0.001 Hz "" 500 MHz Bode Analyzer (requires Bode Hardware Option)
Signal generator 0.1 Hz "" 6 GHz with 0.1 Hz resolution
Four channel 60 MHz digital oscilloscope with 125 MS/s and 14 bit resolution. (Two 50 â�� inputs, two 1 Mâ�� inputs)
Two-Channel DC "" 6 GHz spectrum analyzer, with an unambiguous frequency range of DC "" 60 MHz and an active sideband suppression for spurious-free signal measurements up to 6 GHz (under certain conditions) and cross correlation option. (Input channels can be among all 4 input ports)
Power sweep measurements
Wideband Power/Voltage measurements
THD analyzer
Phase noise analyzer
General noise and bode measurements
Two 1 Mâ�� // 15 pF, 500 MHz, +/-20 V Inputs for gain-phase and DC measurements

Standard accessories

Recommended options

OPTIONAL ACCESSORIES

Accessories

Part NumberDescription

TBVC-NF6N-Female VNA calibration kit, 6 GHz

TBVC-NM6N-Male VNA calibration kit, 6 GHz

TBVC-SF63.5mm / SMA "" Female VNA calibration kit, 6 GHz

TBVC-SM63.5mm / SMA Male VNA calibration kit, 6 GHz

TBCMC-1RF Common Mode Choke

TBJT01Wideband injection transformer

TBJT02Wideband injection transformer

More products TEKBOX

TEKBOX TBWA2/20DB, TBWA2/40DB RF AMPLIFIERS

• EMC probe amplifier
• General purpose wideband RF amplifier

TEKBOX TBHDR1 RF AMPLIFIER

• General purpose gain block
• Pre-amplifier in applications with low noise and high IP3 requirements
• Pre-amplifier for spectrum analyzers, especially in EMC pre-compliance test applications
• Loop antenna amplifier

TEKBOX TBDA1/14DB, TBDA1/28DB RF AMPLIFIER

• RF driver amplifier
• General purpose wideband RF amplifier

TEKBOX OPEN TEM CELLS FOR EMC PRE-COMPLIANCE TESTING

• All TEM cells are supplied together with a 50O/25W RF termination, a DC block to protect the spectrum analyzer or RF receiver input and a N-Male to N-Male coaxial cable.

TEKBOX TBOH02 SELF POWERED ACTIVE LOAD

• Operating voltage range: 2V ½ 70V
• Maximum current: 10A
• Power rating: max. 25W continuously; with additional fan 100W continuously
• Ranges: 0A ½ 1A, 0A ½ 10A, 1O ½ 10O, 10O ½ 100O
• External voltage control input

TEKBOX TBST 120/60/60/2 SHIELDED TENT

• Outer dimensions: 120 cm x 60 cm x 60 cm
• Opening dimensions: 85 cm x 35 cm
• Frame: 20 mm x 20mm extruded aluminium profiles
• Shielding: 2 layers of conductive fabrics
• Seal: conductive Velcro tape

TEKBOX TBMDA1 RF AMPLIFIER

• Pre-compliance RF immunity testing, driving Tekbox EMC probes or TEM cells
• RF driver amplifier
• General purpose wideband RF amplifier

TEKBOX TBFL1 TRANSIENT LIMITER

• Frequency range: 9 kHz ½ 600 MHz
• Attenuation: 10 dB ½ 0.5/+1.2 dB in-band (9 kHz to 600 MHz)
• Attenuation HP-filter: > 30 dB @ 2kHz
• Maximum continuous RF input power: 5W (+37 dBm) in-band

TEKBOX TBMR-110M EMI-ANALYZER 1 HZ-110 MHZ

• EMI Analyzer 1 Hz "" 110 MHz (Measurement Receiver)
• Spectrum Analyzer
• Tracking Analyzer 1 Hz "" 110 MHz
• Noise Analyzer 1 Hz "" 110 MHz
• Oscilloscope 250 MS/s, DC "" 110 MHz

TEKBOX TBLM1 LISN MATE

• Frequency range: 30 kHz ½ 110 MHz
• Maximum RF level at any BNC port: 27dBm
• Maximum DC current at any BNC port: 30 mA