TV Analyzer for High Definition HDTV with MPEG Video/ Dolby Digital Plus Audio Decoding Promax TV EXPLORER HD+
OBSOLET PRODUCT ( * OUT OF USE )

Code: Promax TV EXPLORER HD+


 

Datasheet PDF, 0.37 Mb
           

Description

It includes all the advanced features required by the HDTV and also incorporates a Dolby Digital Plus decoder and total compatibility (measurements and image demodulation) with DVB-T2 (the second generation of the digital terrestrial television).

 

Would it be possible to have all those features in a 2 kg meter?

  • Video decoding: MPEG-2 and MPEG-4 H.264
  • Audio decoding: Dolby Digital Plus, MPEG-1, MPEG-2 and AAC
  • Video formats: SD (standard definition) and HD (high definition)
  • Video resolutions: 1080i, 720p and 576i
  • Screen formats: 16:9 and 4:3
  • HDMI interface
  • DVB-T2, DVB-T/H, DVB-C and DVB-S/S2
  • CAM module (Conditional Access) for encrypted channels
  • TS-ASI input and output

FREQUENCY MARGIN

From 5 to 1000 MHz and from 950 to 2150 MHz

VIDEO
  Digital modulations
  Resolutions
  Video formats
  Colour system
  TV standard
  Aspect ratio


DVB-T2, DVB-T, DVB-H, DVB-S, DVB-S2, DVB-C
1080i, 720p, 576 i
MPEG-2, MPEG-4 H.264
PAL, NTSC, SECAM
M, N, B, G, I, D, K, L
16:9, 4:3

CONNECTIONS

RF, SCART, HDMI, TS-ASI (input and output), USB, Common Interface

DIGITAL MEASUREMENTS

Power, CBER, VBER, MER, C/N, Link margin, Noise Margin

DVB-S2 SIGNAL PARAMETERS

Symbol rate (QPSK) 1 to 45 Mbaud.
Symbol rate (8PSK) 1 to 45 Mbaud.

ANALOGUE MEASUREMENTS

Level, V/A, C/N, desviación, FM deviation and demodulation

ADVANCED FUNCTIONS

Dolby Digital Plus decoder
Channel searching and channel tables generation (EXPLORER)
Signal type automatic identifying (AUTO ID)
Constellation diagram for DVB-T/H, DVB-C, DVB-S and DVB-S2
Echoes analyser mode
Built-in spectrum analyser with direct access keys
Datalogger (measurements automatic acquisition and storage) for digital and analogue channels
SAT IF test (IF distribution network response for satellite band)
Attenuation test function (signal distribution network response for terrestrial band)
DiSEqC generator and LNB supply
Audio and Video recording and playing

 

Recommended options

OP-006-K  8VSB Constellation for US TV EXPLORER II

 

OP-005-19  Rack mount option for TV EXPLORER range

 

OP-009-D  DDP option

 

OP-009-T  DVB-T2 option for TV EXPLORER HD

 

OP-009-OP  Selective OPM for FTTh (TV EXPLORER HD / HD+ / HD LE). PC or APC. Factury built-in

 

PA-009-OP  Selective OPM for FTTh (TV EXPLORER HD / HD+ / HD LE). PC or APC.  Upgrade at calibration center

 

OP-009-OS  5-2500 MHz Optical to RF converter  (TV EXPLORER HD / HD+ / HD LE). PC or APC. Factory built-in

 

PA-009-OS  -2500 MHz Optical to RF converter  (TV EXPLORER HD / HD+ / HD LE). PC or APC.  Upgrade at calibration center

 

OP-009-PS  Selective OPM for FTTh and 5-2500 MHz Optical to RF converter (TV EXPLORER HD / HD+ / HD LE). PC or APC. Factory built-in

 

PA-009-PS  Selective OPM for FTTh and 5-2500 MHz Optical to RF converter (TV EXPLORER HD / HD+ / HD LE). PC or APC. Upgrade at calibration center

 

More products PROMAX

RF POWER DVB-T AMPLIFIER COFDM SIGNAL 1W 30DBM PROMAX DT-730

• FREQUENCY BANDS: UHF from 470 MHz ~ 862 MHz
• 1 W RF power amplifier for COFDM signals
• both for single carrier or multicarrier system
• provides an amplified output of 30 dBm (137 dBµV)
• preserves the original signal quality and maintains a low noise levels

 

SATELLITE TRANSMODULATOR QPSK -> COFDM DVB-T PROMAX MO-162/163

• QPSK INPUT: 950 - 2150 MHz / -65 dBm to -25 dBm
• MPEG-2 TS INPUT: 2x DVB-ASI, 75 ? BNC female connector
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 475 - 875 MHz (45 - 875 MHz for MO-163)

 

ANALOGUE TV VIDEO GENERATOR + DIGITAL TRANSPORT STREAM MPEG-2 PROMAX GV-998

• Multi-standard and multi-system analogue TV signals
• Test Signal generation in MPEG-2, SPI or ASI format
• Test Signal contains valid audio and video programs
• Moving MPEG-2 video pattern generation
• MPEG logos
• RS-232 remote operation

 

OPTICAL FIBER TESTING LIGHT LASER SOURCE PROMAX PROLITE-105

• meet any requeriment of fibre optics for FTTHx networks
• wavelengths 1310, 1490 and 1550 nm
• Low-frequency modulation selectable for each wavelength
• Sequential mode for automatic measurements

 

RADIO & DIGITAL TV MONITORING, DETECTION, MEASUREMENT SYSTEM PROWATCH DEIDE3

• Detection of radio signals received in a specific location, in the radio as well as in the digital and analogue television bands
• Identification of each one of the signals received
• Permanent monitoring of a variable area of the radio spectrum, carrying out an analysis of the detected variation
• digital radio (DAB), terrestrial digital television (TDT) according to the DVB-T (COFDM modulation) standard, FM-RDS radio and analogue TV signals

 

PROMAX RANGERNEO 3 TV 4K AND SPECTRUM ANALYZER

• Professional signal analyzer designed for expert installers and broadcast engineers
• Includes Network Delay Margin, T2-MI analysis, GPS (drive test), DAB/DAB+ digital radio plus all the RANGER Neo 2 functions.

 

TRANSMITTER CONVERTER DVB-T -> OPTICAL FIBER PROMAX DT-610

• RF INPUT Frequency margin: From 470 to 862 MHz, From 50 to 1000 MHz(other options)
• FO OUTPUT Wavelength: 1550 ±20 nm (other wavelength as option)
• Fibre: 9/125, SMF28 or equivalent
• Connector: SC/APC
• optical links over distances up to 20 km

 

CATV/ SMATV COAXIAL CABLE TEST SIGNAL GENERATOR 5..2150 MHZ PROMAX RP-110

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.

 

DVB HDTV VIDEO ENCODER H.264/AVC PROMAX EN-260

• H.264/AVC video encoding
• HDMI, YPbPr, composite video input interface
• MPEG-1 Audio Layer1 & Layer2 encoding
• TS over IP and TS-ASI outputs
• Ethernet remote control

 

PROMAX PROLITE-40B OPTICAL FIBER FUSION SPLICER

• Automatic fusion splicing on 3 axis (X,Y, Z)
• Maximum accuracy
• Fibre aligning by means of core aligning method
• Single or simultaneous axis view.
• Fibre core can be display clearly.
• 5.7" colour LCD display.
• Temperature and atmospheric pressure indicators.
• Auto check quality of cleaved end face.