The EF-970 professional trainer is an innovative training system, designed for the learning, demonstration and experimentation with the Fibre Optics communication systems, the phenomenon related to light and the principles of transmission through Fibre Optics; as well as the latest tendencies like LASER and WDM systems.

EMITTER KIT	Two independent channels, with LED and laser-photoemitters. 8 inputs, BF generator, miliammeter
RECEIVER KIT	With calibrated optic power meter.
OP-970-1	4 optic inputs, the analogue channel has a gain of 40 dB Set of accessories for practices, including one optic positioner, one attenuator and one variable fibre coupler
OP-970-2	Set of accessories for practices of connection

Partial list of exercices EF-970 & EF-970-E

- Measuring the attenuation of an optical fibre

- Spectral dependence of the attenuation of an optical fibre

- Influence of ambient light

- Connecting optical fibre using ST-ST adapters

- Measuring repeatability

- Measuring the P/I characteristics of photoemitters

- Measuring the optical stability of photo-emitters

- Measuring the V/I characteristics of photo-emitters

- Frequency characteristics of photo-emitter modulation

- Bandwidth of photo-detectors

- Transmission of analogue signals

- Transmission of audio signals

- Transmission of video signals

- Transmission of digital signals

- RS-232 transmission using optical fibres

EF-970-E only

- Optical power measurement

- Measuring the attenuation of an optical fibre. Insertion losses method

- Measuring the attenuation of an optical fibre

- Spectral dependence of the attenuation of an optical fibre

- Influence of ambient light

- Connecting optical fibre using ST-ST adapters

- Measuring repeatability

- Measuring the P/I characteristics of photo-emitters

- Measuring the optical stability of photo-emitters

- Measuring the V/I characteristics of photo-emitters

- Frequency characteristics of photo-emitter modulation

- Spectral dependence of photo-detectors (suggested EF-970-E)

- Inverse voltage in photo-detectors

- Bandwidth of photo-detectors

- Transmission of analogue signals

- Transmission of audio signals

- Transmission of video signals

- Transmission of digital signals

- RS-232 transmission by optical fibres

OP-970-01 Exercices kit

- Sensitivity of optical fibre to curvature (Macrocurves)

- Sensitivity of optical fibre to microcurvature

- Radiation characteristics of optical fibre. Measuring numeric aperture

- Measuring sliding in optical fibre connections

- Characteristics of a fixed WDM device

- Characteristics of a variable WDM device

- Measurements with neutral optical fibres

- Measuring insertion loss by the variable optical attenuator

- WDM: multiplexation and demultiplexation

- WDM system

- WDM transmission

- Transmission sensor

- Reflection sensor

- Liquid level sensor

- Spectral dependence insertion loss by the variable optical attenuator

(EF-970-E needed)

- Comparing noise characteristics between PIN and APD photodetectors

(EF-970-E needed)

OP-970-02 Connection kit

- Connections with the optical fibre connector tool kit EF-970 or

EF-970-E

OP-970-03 Microscope

- Recommended even to use with OP-970-02

More products PROMAX

DIDACTIC TRAINING SYSTEM FOR ANALOGUE COMMUNICATIONS PROMAX EC-696

• MODULATIONS: AM, FM, PWM, FDM
• INPUTS / OUTPUTS: Generator, microphone / Oscilloscope, headphones
• TRANSMISSION: Two-wire, coaxial, Fibre Optics, Infra Red & Radio

PROMAX ATLAS-IP MULTICAST AND UNICAST IPTV ANALYZER WITH SRT PROTOCOL SUPPORT

• ATLAS IP is a multicast and unicast IPTV analyzer, with SRT protocol support and optionally ST 2110
• It includes SD-SDI, HD-SDI, and 3G-SDI over RF (and, on demand, over optical fiber).

QUADRUPLE ENCODER VIDEO/ AUDIO -> DVB-T/ TS-ASI PROMAX DT-504

• A/V INPUTS: 4 independent A/V inputs
• RF OUTPUT: 1 DVB-T multiplex
• TS-ASI OUTPUT: optional
• MPEG-2 ENCODER
• Video input: PAL/NTSC
• Audio input: Stereo/Mono/Dual/Joint Stereo

MULTI-CARRIER RETURN PATH CATV CABLE SIGNAL VIDEO GENERATOR 5..100 MHZ PROMAX RP-100/ RP-100Q

• RP-100: 2 generated carrier pilots
• RP-100Q: 2 generated carrier pilots
• 5 MHz to 100 MHz Frequency Range
• 90 to 110 dBµV (30-50 dBmV) adjustable in steps of 1 dB output level
• select independent frequencies for each pilot
• internal rechargeable battery

TDS-OFDM MODULATOR ASI/ SPI -> DTMB PROMAX MO-270

• compliant with China's national standard specification for digital terrestrial broadcasting GB20600-2006
• MPEG-2 TS INPUTS: 2x ASI, 1xSPI
• IF OUTPUT: 36 MHz, 50 ? BNC female connector
• RF OUTPUT: 45-875 MHz, 50 &8486; BNC female connector
• MODULATION: TDS-OFDM, 1 or 3780 subcarriers

DIGITAL SATELLITE RECEIVER DVB-S/S2 -> ASI-TRANSPORT STREAM PROMAX DT-302

• DVB-S/S2 IF INPUT: 2 independent DVB-S/S2 inputs
• TS OUTPUT: 2 double independent DVB-ASI outputs
• allows inserting a Conditional Access Module (CAM)
• Selection of decrypted services by name

DVB-T COMBINER & 22 DBM RF SIGNAL AMPLIFIER PROMAX TD-522

• designed to combine different RF (COFDM) signals in DVB-T format
• provides 46 dBm amplification and an output power of 130 dBµV (+22 dBm)
• to be assembled in a rack cabinet of 19 inches and 1U height
• FREQUENCY RANGE: 50 MHz to 860 MHz

COLOR VIDEO SIGNAL PATTERN GENERATOR PAL/ NTSC/ SECAM PROMAX GV-198

• PAL B/G, D/K, I, N, NTSC M, SECAM B/G, D/K, L Standards
• Direct acces keys for nine different chars
• 4:3 & 16:9 formats
• Addition of an electronic circle
• Double side band modulation

COFDM MODULATOR DVB-ASI/ SPI -> DVB-T/ DVB-H PROMAX MO-170

• MPEG-2 TS INPUTS: 2x DVB-ASI, 1x DVB-SPI
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 45-875 MHz
• CONSTELLATIONS: QPSK, 16QAM, 64QAM

OPTICAL FIBER POWER METER PROMAX PROLITE-23

• 850, 1300, 1310, 1490, 1550 nm CALIBRATED WAVELENGTH
• Pocketsize, large LCD display, easy to use
• Measure six wavelengths through a single connector
• Direct loss measurements units in dB
• Absolute power measurement units in dBm and W (or µW)
• PC software available for testing data collection and report generation