Didactic Training system for Analogue Communications Promax EC-696

Code: Promax EC-696


 

Datasheet PDF, 0.08 Mb

Description

It is composed of two modules, the emitter and the receiver. It has several types of emitters, transmission channels, receivers, modulators and demodulators, in order to configure various analog transmission systems. For instance, it permits to compare the advantages of several transmission systems over others, including those fiber-optics based, or to analyze interference phenomena between channels.

 

 

MODULATIONS

AM, FM, PWM, FDM

INPUTS / OUTPUTS

Generator, microphone / Oscilloscope, headphones

TRANSMISSION

Two-wire, coaxial, Fibre Optics, Infra Red & Radio

 

More products PROMAX

COMBINER 16 X DVB-T -> 4 X DVB-T PROMAX DT-700

• INPUTS FOR EACH COMBINER: 4 BNC female inputs 75 ? (16 total)
• OUTPUTS FOR EACH COMBINER: 1 BNC female output 75 ? (4 total)
• allows many different combinations to adapt to the needs of each system as best as possible
• used to mix the output RF signals of the COFDM modulators and transmodulators
• preserves better the original quality and maintains lower noise levels

 

PLC POWER LINE COMMUNICATIONS SPECTRUM ANALYZER & NOISE GENERATOR 1..50 MHZ PROMAX PROPOWER-5/1

• 1 - 50 MHz PLC Spectrum Analyser Propower-5
• 1 - 50 MHz PLC Noise Generator Propower-1
• field use and combined use
• st the network response to PLC test signals

 

PROMAX ATLAS-IP MULTICAST AND UNICAST IPTV ANALYZER WITH SRT PROTOCOL SUPPORT

• ATLAS IP is a multicast and unicast IPTV analyzer, with SRT protocol support and optionally ST 2110
• It includes SD-SDI, HD-SDI, and 3G-SDI over RF (and, on demand, over optical fiber).

 

TFT-LCD TRAINING SYSTEM FOR DVB-T PROMAX ET-893

• suitable equipment for the learning of the flat screen television sets operation
• equipped with TFT-LCD and Plasma technology
• allows the student to become familiar with Digital Terrestrial Television (DVB-T)
• includes a failures generation module

 

CATV/ SMATV COAXIAL CABLE TEST SIGNAL GENERATOR 5..2150 MHZ PROMAX RP-110

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.

 

MULTI-CARRIER CATV CABLE VIDEO SIGNAL GENERATOR 4 CHANNELS 5..900 MHZ PROMAX RP-200

• 4 channels handheld pilot generator 5..900 MHz Frequency Range
• direct frequency band (downstream) and return band (upstream) in CATV
• fully-configurable by the user
• frequency and level of each pilot can be set independently
• powered by rechargeable batteries

 

DVB-T/ DVB-H MONITORING & CONTROL SYSTEM 6 CHANNLES PROMAX PROWATCH TELMO

• remote control and measuring of Digital Terrestrial Television (DTT)
• compact module, designed for an easy integration
• operating on its own, controlling the quality of service parameters for up to 6 multiplex
• Warning and Alarm that can activate switches

 

ENCODER & TRANSCODER H.264/AVC MPEG-4 HD-SDI HDMI YPBPR RGB CVBS PROMAX EN-264

• H.264/AVC (MPEG-4 part 10), High profile, Level 4.0, 4:2:0 Chrominance sampling
• TS to TS Transcoding (MPEG-2 HD to H.264 HD/SD or MPEG-2 SD to H.264 SD)
• MPEG-1 Audio Layer1 & Layer2 encoding
• 1x Dolby Digital (AC-3) or 1x MPEG-1 audio pass through transcoding
• Supports full HD 1080i encoding
• HD-SDI, HDMI, YPbPr/RGB video input interface

 

SATELLITE TRANSMODULATOR QPSK -> COFDM DVB-T PROMAX MO-162/163

• QPSK INPUT: 950 - 2150 MHz / -65 dBm to -25 dBm
• MPEG-2 TS INPUT: 2x DVB-ASI, 75 ? BNC female connector
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 475 - 875 MHz (45 - 875 MHz for MO-163)

 

WHITE NOISE GAUSSIAN SIGNAL GENERATOR FOR COAXIAL NETWORK TESTING PROMAX NG-283

• frequencies between 1 and 2200 MHz
• handheld broadband white gaussian noise generator
• testing coaxial networks