Cassette Recorder Training System Promax EG-833

Code: Promax EG-833


 

Datasheet PDF, 0.14 Mb

Description

The trainer EG-833 is based on a high quality cassette recorder, with Dolby B and C noise reduction circuits. Its main features are:

  • 3 Heads
  • 1 Motor
  • Dolby©B and C
  • Automatic Tape Selector (ATS)
  • Automatic Recording Level adjustment (ARL)
  • Gradual rise and fade of the sound (FADER)
  • Blank space insertion
  • Signal level indicator
  • Automatic Music Search (AMS)
  • Selectable MPX filter
  • Headphone outputs
  • Synchronized recording

 

 

BLOCK DIAGRAMS

Input section
Recording process section
Playback process section
Output section
Noise reduction systems: Dolby© B and C
Control system
Servos
Automatic Music Searc (AMS)
Power supply
Fluorescent visualiser

FAULT SIMULATOR

Allowing to simulate a hiogh number of regular faults.

 

More products PROMAX

TDS-OFDM MODULATOR ASI/ SPI -> DTMB PROMAX MO-270

• compliant with China's national standard specification for digital terrestrial broadcasting GB20600-2006
• MPEG-2 TS INPUTS: 2x ASI, 1xSPI
• IF OUTPUT: 36 MHz, 50 ? BNC female connector
• RF OUTPUT: 45-875 MHz, 50 &8486; BNC female connector
• MODULATION: TDS-OFDM, 1 or 3780 subcarriers

 

MULTI-CARRIER RETURN PATH CATV CABLE SIGNAL VIDEO GENERATOR 5..100 MHZ PROMAX RP-100/ RP-100Q

• RP-100: 2 generated carrier pilots
• RP-100Q: 2 generated carrier pilots
• 5 MHz to 100 MHz Frequency Range
• 90 to 110 dBµV (30-50 dBmV) adjustable in steps of 1 dB output level
• select independent frequencies for each pilot
• internal rechargeable battery

 

PROMAX ATLAS-IP MULTICAST AND UNICAST IPTV ANALYZER WITH SRT PROTOCOL SUPPORT

• ATLAS IP is a multicast and unicast IPTV analyzer, with SRT protocol support and optionally ST 2110
• It includes SD-SDI, HD-SDI, and 3G-SDI over RF (and, on demand, over optical fiber).

 

CONVERTER ASI-TRANSPORT STREAM-> IP PACKETS PROMAX DT-421

• TS INPUT: 4 x DVB-ASI
• IP OUTPUT: Ethernet 100/1000 Mbps. RJ45 connector
• Communication Protocol: UDP or RTP/UDP
• Transmission methode: MULTICAST
• Payload: 7 MPEG-2 packets

 

TRAINING SYSTEM FOR ANTENNA TRANSMISSIONS PROMAX EA-817B

• install, configure, adjust, modify and analyse any kind of actual MATV and SMATV installation
• high definition (HD) terrestrial television receiver and satellite television receiver is provided
• high definition and video compression (MPEG-2 and MPEG-4)
• DVB-S2, transmodulation, TDT Premium, IPTV, Fiber Optics, FTTx
• DTT signals propagation, Gap-Fillers, transport stream (TS) creation
• familiarity with PID, PMT NID
• configuration and testing of modulation parameters

 

OPTICAL FIBER POWER METER PROMAX PROLITE-23

• 850, 1300, 1310, 1490, 1550 nm CALIBRATED WAVELENGTH
• Pocketsize, large LCD display, easy to use
• Measure six wavelengths through a single connector
• Direct loss measurements units in dB
• Absolute power measurement units in dBm and W (or µW)
• PC software available for testing data collection and report generation

 

POWER AMPLIFIER TRAINING SYSTEM PROMAX EP-834

• comprension of amplifier circuits and practices repairing it
• 6 audio inputs, a block diagram (input signal sources, filters, equalizers)
• RIIA Correction
• Loudness filter
• Subsonic filter

 

DVB MPEG-2 TRANSPORT STREAM RE-MULTIPLEXER PROMAX MX-008

• Fully compliant with DVB ETSI 300421 standard
• Processing of up to 8 SPTS or MPTS
• 8 ASI inputs, 2 ASI outputs
• ASI input packet length 188/204 bytes Self-adapting
• Output rate up to 216 Mbps

 

OPTICAL FIBER TESTING LIGHT LASER SOURCE PROMAX PROLITE-105

• meet any requeriment of fibre optics for FTTHx networks
• wavelengths 1310, 1490 and 1550 nm
• Low-frequency modulation selectable for each wavelength
• Sequential mode for automatic measurements

 

PROMAX PROLITE-40B OPTICAL FIBER FUSION SPLICER

• Automatic fusion splicing on 3 axis (X,Y, Z)
• Maximum accuracy
• Fibre aligning by means of core aligning method
• Single or simultaneous axis view.
• Fibre core can be display clearly.
• 5.7" colour LCD display.
• Temperature and atmospheric pressure indicators.
• Auto check quality of cleaved end face.