The DT-504 module offers the possibility to build a broadcast signal in DVB-T and TS-ASI(*) format from four composite video and audio inputs. It is made of four independent video and audio MPEG-2 encoders and a modulator. Audio inputs can be stereo or mono.

Frequently some TV services are only available as analogue baseband video. That is the case of encrypted programmes which can only be received with a dedicated STB and smart card, signals from CCTV cameras, door entry systems, etc.

By means of the DT-504 modulator, programmes originally in analogue format are inserted to the TV distribution network with the benefits of DVB-T technology.

(*) TS-ASI output optional (option OP-504-S).

A/V INPUTS Connectors	4 independent A/V inputs 3 RCA-Female connectors for each input
RF OUTPUT Connector	1 DVB-T multiplex Female F-type, Impedance 75 ?
TS-ASI OUTPUT	Optional
MPEG-2 ENCODER Video input Audio input Format Video bitrate Audio bitrate Editable parameters Measurements	PAL/NTSC Stereo/Mono/Dual/Joint Stereo MPEG-2 Acording to DVB-T modulation parameters From 32 to 384 kbits/s selectable Service Name, Service ID, V�deo PID, Audio PID, PMT PID Total bitrate
CONFIGURATION AND POWER SUPPLY	Via the DT-800 Control and Power module. Control can be made remotely from a PC

Recommended options

DT-800B	Control unit and power supply.
DT-802	Control unit and redundant power supply modules.
DT-900	Rack and wall mounted structure.
DT-900B	Rack mounted structure.
DT-901	Empty module plates..
DT-902B	Power CAM modules for smart cards..
CC-043	Supply and control cable with 3 connexions for DT-800B (included)
CC-044	Supply and control cable with 4 connexions for DT-800B (included)
CC-143	Supply and control cable with 3 connexions for DT-802 (included)
CC-144	Supply and control cable with 4 connexions for DT-802 (included)
OP-XXX-V	Output in the range 170-650 MHz for modules with DVB-T..
OP-800-P	Option required to use DT-800B with 3 x DT-730 modules
OP-212-D	Dual independent output for DT-212B
OP-504-S	TS-ASI output option for DT-504B

	RECEIVERS WITH ASI-TS OUTPUT
DT-302	Dual DVB-S/S2 receiver with CAM, ASI-TS output.
DT-312	Dual DVB-T receiver, ASI-TS output.
DT-324-M	IP receiver to ASI-TS output (MPTS).
DT-324-S	IP receiver to ASI-TS output (SPTS).

	IP STREAMERS
DT-421-M	IP Streamer. ASI-TS inputs, IP output (MPTS)
DT-421-S	IP Streamer. ASI-TS inputs, IP output (SPTS)

	COMBINERS - AMPLIFIERS
DT-700	4x1 quadruple DVB-T combiner .
DT-710	8 input DVB-T combiner with a 117 dBuV (+10 dBm) one single output.
DT-722	4 input DVB-T combiner with a 129 dBuV / 250 mW (+22 dBm) one single output.
DT-730	DVB-T amplifier with a 137 dBuV / 1 W (+30 dBm).
DT-610	Optical transmitter module
DT-620	Optical receiver module

More products PROMAX

OPTICAL FIBER POWER METER PROMAX PROLITE-23

• 850, 1300, 1310, 1490, 1550 nm CALIBRATED WAVELENGTH
• Pocketsize, large LCD display, easy to use
• Measure six wavelengths through a single connector
• Direct loss measurements units in dB
• Absolute power measurement units in dBm and W (or µW)
• PC software available for testing data collection and report generation

WHITE NOISE GAUSSIAN SIGNAL GENERATOR FOR COAXIAL NETWORK TESTING PROMAX NG-283

• frequencies between 1 and 2200 MHz
• handheld broadband white gaussian noise generator
• testing coaxial networks

PROMAX HD RANGER-ECO TV SIGNAL ANALYZER FOR DVB-T/C/S DVB/T2/C2/S2 DSS

• DVB-T, DVB-T2
• DVB-C, DVB-C2
• DVB-S, DVB-S2, DVB-S2 multistream
• DSS
• VIDEO CODECS MPEG-2, MPEG-4 H.264
• AUDIO CODECS MPEG-1, MPEG-2, HE-AAC

ANALOGUE TV VIDEO GENERATOR + DIGITAL TRANSPORT STREAM MPEG-2 PROMAX GV-998

• Multi-standard and multi-system analogue TV signals
• Test Signal generation in MPEG-2, SPI or ASI format
• Test Signal contains valid audio and video programs
• Moving MPEG-2 video pattern generation
• MPEG logos
• RS-232 remote operation

CATV/ SMATV COAXIAL CABLE TEST SIGNAL GENERATOR 5..2150 MHZ PROMAX RP-110

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.

ANALOGUE & DIGITAL TELEPHONY ISDN TRAINING SYSTEM PROMAX ET-836S

• Last generation of telephone station ISDN / analogue
• 2 internal analogue lines
• 4 external analogue lines
• 4 external basic access So (B+B+D)
• Programming and configuration of the telephone station through PC
• Simulation of an urban analogue station and the circuits of tarification

PROMAX TV EXPLORER NG UNIVERSAL TV VIDEO SIGNAL AND SPECTRUM ANALYZER ULTRA-HD 4K

• next-generation TV EXPLORER, now with native 4K support, DVB-T2, ISDB-T/Tb
• optionally ATSC 3.0 and DVB-S2x
• Its multi-touch user interface offers smartphone-like intuitiveness, making navigation effortless.

PC PERSONAL COMPUTER TRAINING SYSTEM PROMAX EO-865

• assembly, installation and configuration of all the components composing a multimedia PC
• composed of widely spread and high reliability hardware components
• multiple test points enable the main electrical signals
• establish failure diagnostic and repairing methods

TEST GENERATOR OF SATELLITE & COAXIAL SIGNAL PROMAX RP-080

• 4 PILOT CARRIERS: 85 MHz, 750 MHz, 1000 MHz, 2150 MHz
• Selectable and independent carrier level for each one: from 75 to 105 dBµV
• LED indicators for each carrier output level
• 13, 18 V and 22 kHz signal detection.
• Power supply from the LNB or external DC supply.
• Ergonomic and compact format

WIRELESS BAND DOWN CONVERTER 2.4..2.5 GHZ -> 1483..1583 MHZ PROMAX CV-245

• down converter for the 2.4 to 2.5 GHz to 1483 to 1583 MHz
• Converts signals from ISM 2.4 GHz to IF satellite band
• Supply from the signal level meter