TV Analyzer for Analogue, Digital, Terrestrial, Cable, Satellite Promax TV EXPLORER
OBSOLET PRODUCT ( * OUT OF USE )

Code: Promax TV EXPLORER


 

Datasheet PDF, 5.25 Mb

Description

The new TV EXPLORER is the first TV&SAT analyser that fits your hands, with a weight less than 2 kg.

The new TV EXPLORER is been designed for the installation, maintenance and surveillance of terrestrial, satellite and cable TV systems. It is ideal to be used in this transition period from analogue to digital, as it covers a wide range of standards, PAL / SECAM / NTSC in analogue and COFDM / QPSK / QAM in digital.

It includes, in addition to other innovative features, EXPLORER and AUTO ID functions for detecting and identifying automatically channels in the band, an improved graphical user interface that shows all measurements for each signal in a single screen, and direct access buttons to the most common functions.

With only pressing a key, the instrument measures and decodes the signal.

 

 

COVERAGE

Terrestrial, satellite and cable TV

FUNCTIONS

Spectrum analyser / Measurements / Signal decoding

MEASUREMENTS
  ANALOGUE
  DIGITAL
   COFDM 2k/4k/8k
   QPSK
   QAM 16/32/64/128/256

All measures shown simultaneously
Level, Video/audio,C/N
Power, C/N, Channel identifying
MER, CBER, VBER, Noise margin
MER, CBER, VBER, Noise margin
BER, MER

TUNING

By channel and frequency (FI or direct if satellite)

"EXPLORER" FUNCTION

Automatic channel search and channel plan creation

"AUTO ID" FUNCTION

Automatic identification of the type of signal

MONITOR

TFT LCD 5" (320 candles/m2)

UTILITIES

Automatic datalogger
Measurements data reports
Satellite FI test

ADVANCED FUNCTIONS

Internet automatic updates
PkTools software (optional)
Transport case (optional)

DIMENSIONS AND WEIGHT

230 x 161 x 76 mm / 2 kg. approx.

 

Recommended options

OP-006-K  8VSB Constellation for US TV EXPLORER II

 

OP-005-19  Rack mount option for TV EXPLORER range

 

OP-009-D  DDP option

 

OP-009-T  DVB-T2 option for TV EXPLORER HD

 

OP-009-OP  Selective OPM for FTTh (TV EXPLORER HD / HD+ / HD LE). PC or APC. Factury built-in

 

PA-009-OP  Selective OPM for FTTh (TV EXPLORER HD / HD+ / HD LE). PC or APC.  Upgrade at calibration center

 

OP-009-OS  5-2500 MHz Optical to RF converter  (TV EXPLORER HD / HD+ / HD LE). PC or APC. Factory built-in

 

PA-009-OS  -2500 MHz Optical to RF converter  (TV EXPLORER HD / HD+ / HD LE). PC or APC.  Upgrade at calibration center

 

OP-009-PS  Selective OPM for FTTh and 5-2500 MHz Optical to RF converter (TV EXPLORER HD / HD+ / HD LE). PC or APC. Factory built-in

 

PA-009-PS  Selective OPM for FTTh and 5-2500 MHz Optical to RF converter (TV EXPLORER HD / HD+ / HD LE). PC or APC. Upgrade at calibration center

 

More products PROMAX

SFN/MFN MODULATOR ASI-TS MPEG -> DTMB PROMAX MO-280

• fully compliant with the GB20600-2006 and the GY/T 229. 1-2008 standards
• 10 MHz GPS reference input
• MPEG-2 TS INPUTS: 2xSerial ASI-TS MPEG-2 inputs
• RF Output: 45 to 875 MHz (1 Hz steps). MER > 38 dB

 

POWER AMPLIFIER TRAINING SYSTEM PROMAX EP-834

• comprension of amplifier circuits and practices repairing it
• 6 audio inputs, a block diagram (input signal sources, filters, equalizers)
• RIIA Correction
• Loudness filter
• Subsonic filter

 

COMBINER 16 X DVB-T -> 4 X DVB-T PROMAX DT-700

• INPUTS FOR EACH COMBINER: 4 BNC female inputs 75 ? (16 total)
• OUTPUTS FOR EACH COMBINER: 1 BNC female output 75 ? (4 total)
• allows many different combinations to adapt to the needs of each system as best as possible
• used to mix the output RF signals of the COFDM modulators and transmodulators
• preserves better the original quality and maintains lower noise levels

 

PROMAX SATHUNTER+ DVB-S/S2 DSS SATFINDER DETECTOR FOR SATELLITE FINDER ALIGNMENT

• Designed for the installation of Direct to Home systems, fully automatic and extremely easy of use.
• 3-STEP PROCESS Satellite detection, identification, fine adjust
• SATELLITES 50 maximum
• SYMBOL RATE (DVB-S) 2 to 45 Mbauds
• SYMBOL RATE (DVB-S2)

 

TRAINING SYSTEM FOR ANTENNA TRANSMISSIONS PROMAX EA-817B

• install, configure, adjust, modify and analyse any kind of actual MATV and SMATV installation
• high definition (HD) terrestrial television receiver and satellite television receiver is provided
• high definition and video compression (MPEG-2 and MPEG-4)
• DVB-S2, transmodulation, TDT Premium, IPTV, Fiber Optics, FTTx
• DTT signals propagation, Gap-Fillers, transport stream (TS) creation
• familiarity with PID, PMT NID
• configuration and testing of modulation parameters

 

MULTI-CARRIER CATV CABLE VIDEO SIGNAL GENERATOR 4 CHANNELS 5..900 MHZ PROMAX RP-200

• 4 channels handheld pilot generator 5..900 MHz Frequency Range
• direct frequency band (downstream) and return band (upstream) in CATV
• fully-configurable by the user
• frequency and level of each pilot can be set independently
• powered by rechargeable batteries

 

SATELLITE TRANSMODULATOR QPSK -> COFDM DVB-T PROMAX MO-162/163

• QPSK INPUT: 950 - 2150 MHz / -65 dBm to -25 dBm
• MPEG-2 TS INPUT: 2x DVB-ASI, 75 ? BNC female connector
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 475 - 875 MHz (45 - 875 MHz for MO-163)

 

CATV/ SMATV COAXIAL CABLE TEST SIGNAL GENERATOR 5..2150 MHZ PROMAX RP-110

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.

 

DIDACTIC TRAINING SYSTEM FOR ANALOGUE COMMUNICATIONS PROMAX EC-696

• MODULATIONS: AM, FM, PWM, FDM
• INPUTS / OUTPUTS: Generator, microphone / Oscilloscope, headphones
• TRANSMISSION: Two-wire, coaxial, Fibre Optics, Infra Red & Radio

 

EDUCATIONAL TRAINING SYSTEM FOR OPTICAL FIBER COMMUNICATIONS PROMAX EF-970

• EMITTER KIT: Two independent channels, with LED and laser-photoemitters. 8 inputs, BF generator, miliammeter
• RECEIVER KIT: calibrated optic power meter
• principles of transmission through Fibre Optics
• latest tendencies like LASER and WDM systems