The DT-620 is an optical receiver that converts input optical signals into RF DVB-T signals to transmit them over a distribution network.

In order to cover a certain distance, the digital signal is converted into an optical signal through a converter (such as the DT-610) and once at the other end of the link, the DT-620 does conversion again to DVB-T, recovering the signal.

The module has an optical SC input and an RF type BNC output. Input is demodulated and optimized to broadcast on DVB-T and DVB-C digital channels.

At the BNC module output there is released an RF signal. Then it can be inserted into a distribution network with the advantages of robustness and high quality offered by the digital technology.

This module is suitable for optical links up to 40 km away (depending on the number of channels). The optical input supports wavelengths from 1100 to 1600 nm.

OPTICAL INPUT	From 1100 to 1600 nm (imput power from 1100 to 1600 nm)
RF OUTPUT	From 470 MHz to 862 MHz
LINK (WITH TRANSMITTER DT-610) Gain Flatness	0 dB ± 3 dB (at 0 dB of optical loss) 2 dB

Recommended options

DT-800B	Control unit and power supply.
DT-802	Control unit and redundant power supply modules.
DT-900	Rack and wall mounted structure.
DT-900B	Rack mounted structure.
DT-901	Empty module plates..
DT-902B	Power CAM modules for smart cards..
CC-043	Supply and control cable with 3 connexions for DT-800B (included)
CC-044	Supply and control cable with 4 connexions for DT-800B (included)
CC-143	Supply and control cable with 3 connexions for DT-802 (included)
CC-144	Supply and control cable with 4 connexions for DT-802 (included)
OP-XXX-V	Output in the range 170-650 MHz for modules with DVB-T..
OP-800-P	Option required to use DT-800B with 3 x DT-730 modules
OP-212-D	Dual independent output for DT-212B
OP-504-S	TS-ASI output option for DT-504B

	RECEIVERS WITH ASI-TS OUTPUT
DT-302	Dual DVB-S/S2 receiver with CAM, ASI-TS output.
DT-312	Dual DVB-T receiver, ASI-TS output.
DT-324-M	IP receiver to ASI-TS output (MPTS).
DT-324-S	IP receiver to ASI-TS output (SPTS).

	IP STREAMERS
DT-421-M	IP Streamer. ASI-TS inputs, IP output (MPTS)
DT-421-S	IP Streamer. ASI-TS inputs, IP output (SPTS)

	COMBINERS - AMPLIFIERS
DT-700	4x1 quadruple DVB-T combiner .
DT-710	8 input DVB-T combiner with a 117 dBuV (+10 dBm) one single output.
DT-722	4 input DVB-T combiner with a 129 dBuV / 250 mW (+22 dBm) one single output.
DT-730	DVB-T amplifier with a 137 dBuV / 1 W (+30 dBm).
DT-610	Optical transmitter module
DT-620	Optical receiver module

More products PROMAX

ANALOGUE TV VIDEO GENERATOR + DIGITAL TRANSPORT STREAM MPEG-2 PROMAX GV-998

• Multi-standard and multi-system analogue TV signals
• Test Signal generation in MPEG-2, SPI or ASI format
• Test Signal contains valid audio and video programs
• Moving MPEG-2 video pattern generation
• MPEG logos
• RS-232 remote operation

SFN/MFN MODULATOR DVB-ASI/ SPI -> DVB-T/ DVB-H PROMAX MO-180

• MPEG-2 TS INPUT: 2xDVB-ASI 75 ?, 1xDVB-SPI LVDS DB-25
• RF Output: 45 - 875 MHz
• CONTROL INTERFACE: Ethernet RJ-45 connector (SNMP compatible)
• 10 MHz GPS reference input

PC PERSONAL COMPUTER TRAINING SYSTEM PROMAX EO-865

• assembly, installation and configuration of all the components composing a multimedia PC
• composed of widely spread and high reliability hardware components
• multiple test points enable the main electrical signals
• establish failure diagnostic and repairing methods

RADIO & DIGITAL TV MONITORING, DETECTION, MEASUREMENT SYSTEM PROWATCH DEIDE3

• Detection of radio signals received in a specific location, in the radio as well as in the digital and analogue television bands
• Identification of each one of the signals received
• Permanent monitoring of a variable area of the radio spectrum, carrying out an analysis of the detected variation
• digital radio (DAB), terrestrial digital television (TDT) according to the DVB-T (COFDM modulation) standard, FM-RDS radio and analogue TV signals

IP RECEIVER -> 4 X DVB-ASI TRANSPORT STREAM PROMAX DT-324

• IP INPUT: Ethernet 100/1000 Mbps. RJ45 connector
• TS OUTPUT: 4 x DVB-ASI. BNC Female connector, 75 ?
• Communication protocol: UDP or RTP/UDP communication protocol
• Transmision methode: MULTICAST / IGMP Version 2
• Payload: From 1 to 7 packets MPEG-2

TRANSMODULATOR DVB-S -> DVB-T PROMAX DT-202

• DVB-S FI INPUT: 2 independent DVB-S FI inputs
• RF OUTPUT: 2 combined DVB-T multiplexes
• PID Filtering with Filtering Table up to 32 PID
• Measurement: Bitrate of the output multiplex
• includes an internal combiner that delivers a single DVB-T output with high C/N

CONVERTER ASI-TRANSPORT STREAM-> IP PACKETS PROMAX DT-421

• TS INPUT: 4 x DVB-ASI
• IP OUTPUT: Ethernet 100/1000 Mbps. RJ45 connector
• Communication Protocol: UDP or RTP/UDP
• Transmission methode: MULTICAST
• Payload: 7 MPEG-2 packets

PROMAX ATLAS-IP MULTICAST AND UNICAST IPTV ANALYZER WITH SRT PROTOCOL SUPPORT

• ATLAS IP is a multicast and unicast IPTV analyzer, with SRT protocol support and optionally ST 2110
• It includes SD-SDI, HD-SDI, and 3G-SDI over RF (and, on demand, over optical fiber).

PROMAX TVHUNTER+ DIGITAL TERRESTRIAL TV HUNTER FOR DVB-T AND DVB-T2 SIGNALS

• Small handheld easy to use meter
• has been designed for the installation of Digital Terrestrial Television systems for both DVB-T and DVB-T2 systems
• It includes the basic measurements to ensure the quality of reception: MER, CBER, VBER, etc.

WIRELESS BAND DOWN-CONVERTER5.7..5.8 GHZ -> 1.5..1.6 GHZ PROMAX CV-589

• down converter for the 5.7 to 5.8 GHz frequency range to 1500 to 1600 MHz
• Converts signals from ISM 5.8 GHz to IF satellite band
• Supply from the signal level meter