The ET-836S is intended for the learning of the theory and practising of the central commutation and interior telephony networks. It incorporates a PABX exchange, internal telephone lines (analogue and RDSI), an external line simulator, tariff generator modules, channel simulator, fault simulator and connection points for analogue and digital (ISDN) terminals. It can be connected via modem and directly to a PC

Last generation of telephone station ISDN / analogue
2 internal analogue lines
4 external analogue lines
4 external basic access So (B+B+D)(it allows the connexion un to 8 independent ISDN extensions)
Programming and configuration of the telephone station through PC
Simulation of an urban analogue station and the circuits of tarification

More products PROMAX

OPTICAL FIBER VARIABLE ATTENUATOR 30 DB FTTH PROMAX PROLITE-330

• Extremely easy to use
• Low Insertion Loss (< 1 dB)
• Bi-directional
• Direct access to zero and maximum attenuation
• > 30 dB in all 1110-1650 nm range

COFDM MODULATOR DVB-ASI/ SPI -> DVB-T/ DVB-H PROMAX MO-170

• MPEG-2 TS INPUTS: 2x DVB-ASI, 1x DVB-SPI
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 45-875 MHz
• CONSTELLATIONS: QPSK, 16QAM, 64QAM

MPEG-2 TRANSPORT STREAM RECORDER, PROCESSOR, PLAYER PROMAX TG-130

• integrated DVB-T tuner that allows the TS capture in real time
• record a transport stream continuously for several minutes and then play it back
• work in the field where maybe it is not possible to find electricity available
• ASI Transport Stream Input: Maximum data rate 40 Mb/s
• RF Input: DVB-T from 35 to 100 dBµV
• ASI & SPI parallel Transport Stream Output: Maximum data rate 32 Mb/s
• Storing Capacity: Memory card 4 GB, 20 minutes approx (20 Mbits/s)

CATV CABLE NETWORK ANALYZER PROMAX-4

• measure the basic parameters to determine the quality of the signal in a CATV system
• different options depending on the needs
• one hand operation instrument with direct reading of the measurement
• illuminated LCD screen
• audio demodulator together with an speaker
• exchangeable input connector so to avoid damaging the instrument

MPEG-2 TRANSPORT STREAM RECORDER, PROCESSOR, PLAYER PROMAX TG-140

• record a transport stream continuously for several hours up to 15 hours at 20 Mbps
• ASI transport stream Input, Maximum data rate 150 Mbps
• ASI transport stream Output, SPI parallel transport stream Output, Maximum data rate 90 Mbps
• Hard disk 160 GB Storage Capacity
• USB, Ethernet interface

ANALOGUE & DIGITAL TELEPHONY ISDN TRAINING SYSTEM PROMAX ET-836S

• Last generation of telephone station ISDN / analogue
• 2 internal analogue lines
• 4 external analogue lines
• 4 external basic access So (B+B+D)
• Programming and configuration of the telephone station through PC
• Simulation of an urban analogue station and the circuits of tarification

ANALOGUE TV VIDEO GENERATOR + DIGITAL TRANSPORT STREAM MPEG-2 PROMAX GV-998

• Multi-standard and multi-system analogue TV signals
• Test Signal generation in MPEG-2, SPI or ASI format
• Test Signal contains valid audio and video programs
• Moving MPEG-2 video pattern generation
• MPEG logos
• RS-232 remote operation

PROMAX TVHUNTER+ DIGITAL TERRESTRIAL TV HUNTER FOR DVB-T AND DVB-T2 SIGNALS

• Small handheld easy to use meter
• has been designed for the installation of Digital Terrestrial Television systems for both DVB-T and DVB-T2 systems
• It includes the basic measurements to ensure the quality of reception: MER, CBER, VBER, etc.

TRAINING SYSTEM FOR ANTENNA TRANSMISSIONS PROMAX EA-817B

• install, configure, adjust, modify and analyse any kind of actual MATV and SMATV installation
• high definition (HD) terrestrial television receiver and satellite television receiver is provided
• high definition and video compression (MPEG-2 and MPEG-4)
• DVB-S2, transmodulation, TDT Premium, IPTV, Fiber Optics, FTTx
• DTT signals propagation, Gap-Fillers, transport stream (TS) creation
• familiarity with PID, PMT NID
• configuration and testing of modulation parameters

DVD & CD TRAINING SYSTEM PROMAX ED-845

• theoretical-practical study of a DVD & CD player
• observe the internal composition of the mechanics
• analyze the signals that take part of the operation
• simulate several faults for the study of troubleshooting and diagnostic methods