New PROPOWER range is made up of two basic elements: a PLC Spectrum Analyser and a PLC test signal Generator. All instruments have been designed for field use and combined use allow to test the network response to PLC test signals.

PLC Spectrum Analyser Propower-5

Freq. Range: 1 - 50 MHz
Power: From -90 to 10 dBm
Resolution: 200 kHz
Spectrum Mode / Tilt Mode
Data Acquisition
Handheld

PLC Noise Generator Propower-1

Freq. Range: 1 - 50 MHz
Power: 5 dBm
Handheld.

PROPOWER-5 (PLC SPECTRUM ANALYSER) FREQ. RANGE POWER FUNCTIONS	1 - 50 MHz From -90 to 10 dBm Spectrum mode, tilt mode, data acquisition
PROPOWER 1 (PLC NOISE GENERATOR) FREQ. RANGE POWER	1 - 50 MHz 5 dBm

More products PROMAX

WHITE NOISE GAUSSIAN SIGNAL GENERATOR FOR COAXIAL NETWORK TESTING PROMAX NG-283

• frequencies between 1 and 2200 MHz
• handheld broadband white gaussian noise generator
• testing coaxial networks

COFDM MODULATOR DVB-ASI/ SPI -> DVB-T PROMAX MO-160/161

• MPEG-2 TS INPUT: 2x DVB-ASI, 1x DVB-SPI
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 475-875 MHz (45-875 MHz for MO-161 model)
• CONSTELLATIONS: QPSK, 16QAM, 64QAM

MODULATOR ASI-TS MPEG -> ISDB-T/TB PROMAX MO-370

• -T and ISDB-TB modulator contained in a 19" 1U chassis
• inputs can be used to modulate the COFDM signal
• TS MPEG INPUT: 2x ASI
• RF OUTPUT: 45-875 MHz (1 Hz steps), approx. 80 dBµV power

CONVERTER ASI-TRANSPORT STREAM-> IP PACKETS PROMAX DT-421

• TS INPUT: 4 x DVB-ASI
• IP OUTPUT: Ethernet 100/1000 Mbps. RJ45 connector
• Communication Protocol: UDP or RTP/UDP
• Transmission methode: MULTICAST
• Payload: 7 MPEG-2 packets

SFN/MFN MODULATOR DVB-ASI/ SPI -> DVB-T/ DVB-H PROMAX MO-180

• MPEG-2 TS INPUT: 2xDVB-ASI 75 ?, 1xDVB-SPI LVDS DB-25
• RF Output: 45 - 875 MHz
• CONTROL INTERFACE: Ethernet RJ-45 connector (SNMP compatible)
• 10 MHz GPS reference input

COMBINER 4 X DVB-T -> 1 X DVB-T PROMAX DT-722

• FREQUENCY MARGIN: From 50 MHz (C-2) to 860 MHz (C-69)
• INPUTS: 4 inputs Female BNC, 75 ? impedance
• RF OUTPUT: 1 female BNC output, 75 ? impedance
• output designed to mix output RF signals of COFDM modulators and transmodulators with DTT channels

DVD & CD TRAINING SYSTEM PROMAX ED-845

• theoretical-practical study of a DVD & CD player
• observe the internal composition of the mechanics
• analyze the signals that take part of the operation
• simulate several faults for the study of troubleshooting and diagnostic methods

CATV/ SMATV COAXIAL CABLE TEST SIGNAL GENERATOR 5..2150 MHZ PROMAX RP-110

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.

DVB-T COMBINER & 22 DBM RF SIGNAL AMPLIFIER PROMAX TD-522

• designed to combine different RF (COFDM) signals in DVB-T format
• provides 46 dBm amplification and an output power of 130 dBµV (+22 dBm)
• to be assembled in a rack cabinet of 19 inches and 1U height
• FREQUENCY RANGE: 50 MHz to 860 MHz

RADIO TRAINING SYSTEM PROMAX EU-832

• incorporated fault simulator module permits to practice units diagnosis and repairing methods
• designed from a stereo radio tuner equipped with the RDS system
• most advanced reception circuits