Electrician's Multimeter Megger - AVO210

• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
• Up to 5000 A output current
• Two units, each of about 20 kg, makes it easier to carry
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result

 

• TDR1000/3P is suitable for use on both dead or live cables
• Simple operation
• AUTO set up for instant use
• Ultra fast pulse for near end fault identification
• Trace HOLD feature to allow comparison between cables
• IP54 rating offers real life working
• No blocking filters require
• Supplied with fused test leads

 

• Display with high contrast for good readability by day and night
• Current direction indication for clear cable identification
• Transmitter with two output signals to distinguish between cables lying side by side
• IP 65 for wet, dusty, and dirty working environments
• 100 freely adjustable transmitter frequencies (from 50 Hz to 200 kHz)

 

• Automated 8-terminal/6-winding measurement capability
• Simultaneous winding magnetization
• Tests operation of on-load tap-changers
• Built-in auto-demagnetization feature
• Automatic discharge
• Power DB software (MTO330)

 

• Preprogrammed test sequences for reclosers and sectionalizers
• High-capacity outputs to test virtually all reclosers
• Accurate duplication of high-voltage test results
• Simple operation and precise test results
• Simplified adjustment of test current

 

• FREJA 403 3x60 A at 300 VA per phase.
• FREJA 406 Up to 6 channels: 3 x 60 A and 3 x 15 A
• FREJA 409 Up to 9 channels: 6 x 60 A and 3 x 15 A
• Voltage outputs : Up to four channels 300 V at 150 VA
• Fully automated testing using FREJA Win software
• PC operated or stand alone using the intuitive graphic touch screen
• High current, high power output (60 A / 300 VArms) per phase
• FREJA 409 provides 3 x 120 A in threephase configuration mode
• FREJA 406 provides 6 currents, and FREJA 409 provides 9 currents for transformer differential testing
• IEC 61850 test capabilities

 

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO selection of gain and pulse width.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

 

• Automated measurement and analysis of moisture content, tan delta/power factor and oil conductivity
• Individual temperature correction (ITC) of tan delta/power factor and oil conductivity
• 40% faster measurements with the new IDAX 5.0 SW
• Reliable measurements in high-interference environments
• Multi-function test set for transformer measurements

 

• Two and three wire non-trip loop testing for RCD protected circuits
• Type-B RCD and 3-phase RCD testing for industrial applications with no Earth
• 3-terminal earth test and stakeless testing for earth electrode resistance measurement **
• Internal memory and Bluetooth® communications

 

• Enables resistance measurement on circuit breakers
• Small and light weight
• A number of operations can be run with short waiting intervals