Voltage detector Fluke 1AC II VoltAlert

• 0 to 21 mA, 10 to 50 mA Current measure
• Best in class 0.2 % accuracy
• 0.01 mA resolution and sensitivity

 

• 2-channels isolated 200MHz
• CAT III 1000V / CAT IV 600V safety rated
• Dedicated 5000 Count digital multimeter in two-channel models
• Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
• IP-51 rated for dust and drip proof to withstand harsh environments
• Isolated USB ports for memory devices and PC connectivity

 

• Infrared temperature range from -35 to 275 ºC
• HACCP check lights for instant recognition of safe/unsafe temperatures
• LED target illumination highlights the entire measurement spot for accurate targeting
• Hand washable (IP54 sealed)
• Probe temperature range -40 to 200 ºC(Fluke Food Pro Plus)

 

• 600V model
• Automatically measures V AC, V DC with precise digital resolution
• 100 A AC Current
• Displays resistance to 1000O

 

• -10 to 75 mV, 0 to 10 V Voltage source
• -10 to 75 mV, 0 to 30 V Voltage measure
• 0 to 24 mA Current measure
• 0 to 3200 O Resistance measure / source

 

• 0 to 300 V DC/AC Voltage measure
• 0 to 15 V DC Voltage source / simulate
• 0 to 110 mA DC Current measure
• 0 to 22 mA DC Current source / simulate
• 0 to 11 kO Resistance measure / source / simulate
• 1 to 50 kHz Frequency measure / source / simulate

 

• Test voltage: 50V, 250V, 500V, 1000V
• Two measurements at once and a dual display
• PEFC/PSC and loop impedance
• Fast voltage measurement between L-N, L-PE and N-PE
• PASS/FAIL indication for RCD test results
• Earth resistance

 

• take simultaneous visual images with the thermal heat map images that are accurately aligned close in
• Temperature measurement range -10 °C to +250 °C (14 °F to 482 °F)
• Infrared spectral band 6.5 µm to 14 µm
• Minimum focus distance 50 cm (19.6 in)
• Field of View 28° X 28°
• 4 GB Micro SD card

 

• Calibrates over 15 different categories of general-purpose test equipment
• Options for power meter, insulation/continuity tester and oscilloscope calibration
• Semi-automated and fully automated procedure modes
• Fully supported by MET/CAL Plus software
• Intuitive front panel operation for ease of use

 

• hand operated pressure pump
• designed to generate either vacuum to -13 psi / -.90 bar or pressures to 100 psi / 6.9 bar
• Pump can be easily cleaned without disassembly
• Adjustable pressure relief valve with slow-bleed capability. Allows the slow release pressure at a controlled rate
• Quick fit connectors, one for the reference port for connection to a Fluke 700 series pressure module and one to connect to a unit under test
• Slim design, easy to carry and use