0 to 100 mV, 0 to 30 V DC Voltage measure
0 to 100mV, 0 to 10 V DC Voltage source / simulate
0 to 24 mA Current measure / source / simulate
0 to 3200 O Resistance measure / source / simulate
1 to 10 kHz Frequency measure / source / simulate
ATEX II 1 G Ex ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Two separate channels; measure, source and view process signals simultaneously
Small, streamlined shape makes it easy to carry
Rugged, reliable design stands up to field use
Easy to read measure/source screen lets you view input and output simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Support flow meter testing with frequency and CPM functions
Perform fast linearity tests with auto- step and auto-ramp features
Power transmitters during test using loop supply with simultaneous mA measurement
Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 10 ms
Store frequently used test setups for later use
Backlight lets you work in poor light
Large battery capacity of four AA cells
Battery door for easy changes

Standard accessories

One set of AC72 alligator clips
One set of stackable test leads
One set of TL 75 testleads
User manuals
NIST- traceable calibration report and data

More products FLUKE

INFRARED THERMOMETER FLUKE FOOD PRO

• Infrared temperature range from -35 to 275 �C
• HACCP check lights for instant recognition of safe/unsafe temperatures
• LED target illumination highlights the entire measurement spot for accurate targeting
• Hand washable (IP54 sealed)
• Probe temperature range -40 to 200 �C(Fluke Food Pro Plus)

FLUKE 1587 MEGOHMMETER INSULATION MULTIMETER 50/ 1000V

• Insulation test: 0.01 MO to 2 GO
• Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V

FLUKE RDL2 HVAC UV FLASHLIGHT FOR REFRIGERANT LEAKAGE DETECTION

• Six UV LEDs (395 nm wavelength) detect leak detection dyes
• Laser pointer clearly locates center of the UV field for accuracy
• Three LED flashlight with 100,000 hour LED life
• Operating temperature 0 ° C to 50 ° C
• Four operating modes: flashlight, UV light, laser light, UV/laser light combination

FLUKE 1625-2 GEO EARTH GROUND RESISTANCE TESTER

• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• USB data storage and transfer
• Automatic Frequency Control (AFC)
• R* measurement - calculates earth ground impedance at 55 Hz

INFRARED NON-CONTACT THERMOMETER FLUKE 62 MAX

• Dust and water-resistant: IP54 rated for dust and water resistance.
• Rugged: 3-meter (9.8-foot) drop tested.
• Ergonomically designed: Completely redesigned for a more natural hand fit.
• Large, backlit display: Large screen makes data easier to read, even in dark areas.
• Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements.
• Alarm: Hi and Lo alarms for rapid display of measurements outside the limits

ESA710 ELECTRICAL SECURITY ANALYZER FOR TESTING MEDICAL EQUIPMENTS

• 5” Touchscreen with intuitive user interface
• Small, portable, ergonomic design with an integrated handle
• OneQA-enabled workflow automation eliminates need for laptop
• Wireless capability allows you to run test procedures in the field and automatically sync results

FLUKE 719PRO ELECTRIC PRESSURE CALIBRATOR

• Fluke-719Pro-30G -12 to 30 PSI / -0.8 to 2 bar
• Fluke-719Pro-150G -12 to 150 PSI / -0.8 to 10 bar
• Fluke-719Pro-300G -12 to 300 PSI / -0.8 to 20 bar
• Unique integrated electric pump for one handed pressure calibration
• Pressure measurement from internal or external sensor
• Sourced/simulated or measured mA values
• Temperature measured by optional RTD probe

FLUKE TI400 INFRARED CAMERA 320X240 RESOLUTION

• 320x240 Detector resolution
• Ruggedized high resolution 640x480 capacitive touch screen for quick menu navigation
• Range: -20 °C si +1200 °C
• Precision : ± 2 °C sau 2%
• Sensibility : = 0,05 °C

FLUKE 714B THERMOCOUPLE CALIBRATOR

• measure and simulate (17) different thermocouple types and millivolts
• Measure 4 to 20 mA signals while simultaneously sourcing a temperature signal
• Configurable 0 % and 100 % source settings for quick 25 % linearity checks
• Linear ramp and 25 % step auto ramp based on 0 % and 100 % settings
• Dual inputs and backlit display for easy interpretation of measurements
• Power down settings remembered at power up for easy restart of tests
• 1-year and 2-year specifications and traceable certification of calibration

INFRARED NON-CONTACT THERMOMETER FLUKE 572

• Backlit display for poorly lit areas
• Last ten temperature readings displayed on bar graph for easy reference
• Enhanced optics (distance to spot ratio up to 60:1) allow measurements of smaller objects from farther away
• Coaxial three-dot laser sighting system highlights the true diameter of measurement spots at all distances (90% energy)
• MIN/MAX measurements calculations instantly computed
• Audible and visible HI temperature alarm for instant recognition