4.5 digit large ¼ VGA display with white backlight
50,000 count
0.025% basic accuracy
Logging function with TrendCapture
Log multiple sessions or log data continuously for over 200 hours
i-info button on board help screens for measurement functions
Saved measurements allow you to name and recall measurements made in the field
Multiple sets of measurement information can simultaneously displayed at the same time.
Real Time Clock - for automatic time stamping of saved readings
Field upgradeable and expandable meter lets you stsay current as new capabilities are added
Multi-lingual interface
Min/Max/Average with Time Stamp to record signal fluctuations
Soft keys, scroll buttons and easy navigation control access to secondary functions.
100 kHz ac bandwidth
True-rms ac voltage and current for accurate measurements on complex signals or non-linear loads
Measure up to 10A (20 A for 30 seconds; 10A continuous)
100 mF capacitance range
Temperature function
Relative mode to remove test lead resistance from low ohms or capacitance measurements
Peak capture to record transients as fast as 250 µs
Premium test leads and alligator clips included
Optical USB PC communication interface
Limited lifetime warranty
CAT III 1000 V / CAT IV 600 V safety rated

Standard accessories

Manual
6 AA Batteries, installed
TL71 Silicone Test Leads
Probe Holder
Two AC72 Alligator Clips
Registration Card
Cal Practices Document
CD-ROM Users' Manual (16 languages)
Getting Started Manual
Statement of Calibration Practices Document

More products FLUKE

LASER DISTANCE METER 80M FLUKE 419D

• Instantly measures up to 80m (260 ft) with accuracy of +/- 1mm
• 3-line display plus storage for 20 complete displays
• Tripod mountable

CARBON MONOXIDE TESTER FLUKE CO-220

• Rugged case and electronics.
• Large LCD displays CO levels from 0 to 1000 ppm.
• Bright back-light allows easy screen viewing under dim lighting conditions.
• Beeper triggers with increasing frequency as CO levels rise.
• MAX Hold function stores and displays the maximum CO level.
• Automatic sensor zeroing and self-test sequence upon start-up.

AIR FLOW METER FLUKE 922

• Air Pressure
• Air Velocity
• Air Flow (Volume)
• Temperature

PROCESS MULTIMETER FLUKE 789

• 0 to 1000 V DC/AC Voltage measure
• 0 to 1 A Current measure
• 0 to 20 mA, 4 to 24 mA Current source
• DMM and loop calibrator in one tool
• HART mode setting with loop power

FLUKE NORMA 5000 PRECISION POWER ANALYZER

• 3, 4 or 6 power phases
• Bandwidth from dc to 3 MHz / 10 MHz
• FFT analysis, vector diagram, and Digital Oscilloscope
• Voltage, current and power harmonics measured up to the 40th harmonic

TRUE-RMS CURRENT CLAMP METER 400 A FLUKE 324

• 400 A ac current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection
• Temperature and capacitance measurement

PORTABLE VIBRATION TESTER ANALYZER FLUKE 810

• On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on root cause, reducing unplanned downtime
• Fault severity scale with four severity levels helps you prioritize maintenance work
• Repair recommendations advise technicians on corrective action
• On-board context sensitive help provides real-time tips and guidance to new users
• 2 GB expandable on-board memory provides enough space for your machinery’s data

FLUKE 190-504 190-504/S HANDHELD SCOPEMETER OSCILLOSCOPE 4X500 MHZ

• 4-channels isolated 500MHz
• CAT III 1000V / CAT IV 600V safety rated
• Dedicated 5000 Count digital multimeter in two-channel models
• Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
• IP-51 rated for dust and drip proof to withstand harsh environments
• Isolated USB ports for memory devices and PC connectivity

FLUKE 279 FC TRMS DIGITAL THERMAL MULTIMETER WITH TERMOVISION

• Full-featured multimeter with built-in thermal imager
• 15 measurement functions including: AC voltage with low-pass filter, DC voltage, Resistance, Continuity, Capacitance, Diode test, Min/Max/Avg, AC current (with iFlex), Frequency
• Image resolution-80 x 60
• 3.5 in /8.89 cm color LCD screen
• CAT III 1000 V, CAT IV 600 V measurement category

VIBRATION METER FLUKE 805

• measures overall vibration as well as specific variables like bearing condition and temperature
• calculate bearing condition and overall vibration
• Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz)
• Exportable data via USB
• Crest Factor+