Insulation test range: 0.01 MO to 10 GO
Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
Save both time and money with automatic calculation of Polarization Index and Dielectric Absorption Ratio
Make repetitive tests simple and easy with the Compare (Pass/Fail) function
Repetitive or hard-to-reach testing is easy with the remote test probe
Live circuit detection prevents insulation test if voltage >30 V is detected for added user protection
Auto-discharge of capacitive voltage for added user protection
AC/DC voltage: 0.1 V to 600 V
200 mA Continuity
Resistance: 0.01 O to 20.00 kO

Standard accessories

Remote probe
Test leads
Test probes
Alligator clips
User documentation

Recommended options

TL225 Stray Voltage Adapter Test Lead Kit
C101 C101 Hard Case
C25 Soft Meter Case
CXT170 CXT170 Extreme Case
TPAK ToolPak, Meter Hanging Kit

More products FLUKE

FLUKE 289 HANDHELD DIGITAL DATA LOGGING MULTIMETER 4.5 DIGIT

• 50,000 count
• 0.025% basic accuracy
• Logging function with TrendCapture
• Low input impedance function (LoZ)
• Motor winding and low ohm measurement range
• Low pass filter

DOCUMENTING PROCESS CALIBRATOR FLUKE 744

• 0 to 300 V DC/AC Voltage measure
• 0 to 15 V DC Voltage source / simulate
• 0 to 110 mA DC Current measure
• 0 to 22 mA DC Current source / simulate
• 0 to 11 kO Resistance measure / source / simulate
• 1 to 50 kHz Frequency measure / source / simulate
• PC interface and data logging
• Integrated HART communication

FLUKE II905 ACOUSTIC CAMERA IMAGER FOR INSPECTINA AND DETECTION COMPESSED AIR

• Easy, fast, and safe visual detection of compressed gas leaks with LeakQ mode including estimated leak size and cost.
• The 7" LCD touchscreen overlays a SoundMap on visual images, facilitating rapid leak location identification.
• The integrated visual- and textual tagging and annotation functionalities offer important details to optimize reporting and follow-up actions.

FLUKE 114 HANDHELD DIGITAL MULTIMETER ELECTRICAL 3.5 DIGIT

• 3.5 digit
• 6000 count
• 0.5% accuracy
• AutoVolt: automatic ac/dc voltage selection

HANDHELD LOOP CALIBRATOR FLUKE 707EX

• 0 to 28 V DC Voltage measure
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• mA accuracy of 0.015%
• For use in explosion endangered areas ATEX certifed ( II 2 G Eex ia IIC T4)

HANDHELD TEMPERATURE CALIBRATOR FLUKE 724

• -10 to 75 mV, 0 to 10 V Voltage source
• -10 to 75 mV, 0 to 30 V Voltage measure
• 0 to 24 mA Current measure
• 0 to 3200 O Resistance measure / source

MULTIFUNCTIONAL TESTER FOR TEMPERATURE, HUMIDITY, VELOCITY, CO, CO2 FLUKE 075 AIRMETER

• Temperature -20 °C to 50 °C (-5 °F to 122 °F)
• Velocity 0.25 m/sec to 15 m/sec
• Relative Humidity 10 % to 90 % RH, non-condensing
• CO2 0 to 5000 ppm
• CO 0 to 500 ppm

FLUKE 700HTP-2 HYDRAULIC TEST PUMP FOR PRESSURE CALIBRATION

• hand operated hydraulic pressure pump
• designed to generate calibration pressures up to 10,000 psi/690 bar
• Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke
• Integral pressure adjustment vernier knob for fine pressure adjustment
• Directly connection to pressure modules consolidates two separate pieces into one when performing pressure calibration and testing
• Two ¼ inch NPT pressure ports, one for reference (pressure module or gauge), one for UUT
• Improved priming
• Improved stroke limiting mechanism

FLUKE 8846A DIGITAL BENCH MULTIMETER 6.5 DIGIT

• 6.5 digit resolution
• Basic Vdc accuracy 0.0024 %
• Dual display
• 100 µA to 10 A current range, with up to 100 pA resolution

DIGITAL CONTACT THERMOMETERS SERIES FLUKE 50 II

• Relative time clock on MIN, MAX, and AVG provides a time reference for major events
• Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy
• Measures J, K, T, and E-types of thermocouples
• Readout in �C, �F, or Kelvin (K)
• Data Logging up to 500 points of data with user adjustable recording interval(Fluke 53 II and Fluke 54 II)