MP530A is a 5000 count, True RMS auto Ranging Multimeter measures AC/DC Voltage, AC/DC current, Resistance, Temperature, Capacitance and Frequency with a 0.08% basic accuracy. Additional features include: diode test, continuity check, easy-to-read backlit display, Auto Power Off, Data Hold, and low resistance auto lead zero. UL listed, CAT IV-600 Volt rating. Includes protective holster with built-in stand, test leads, Type K bead temperature probe, and 9 Volt battery.

Features:

High basic DC Voltage accuracy of 0.08%
Wide AC Voltage bandwidth of 40Hz to 20kHz
Rugged design with protective holster and water resistant housing
Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)
Multimeter functions: True RMS AC/DC Voltage and Current, Resistance, Frequency, Capacitance, Diode and Continuity
Temperature function: -58 to 1832°F (-50 to 1000°C )
Smart auto power off, Hold and low resistance auto-lead zero
Complete with built-in stand, CAT IV test leads, protective holster, Type K temperature probe and 9V battery
Optional Windows® compatible PC communication software and optically isolated cable

More products EXTECH

EXTECH DL150 TRUE RMS AC VOLTAGE/CURRENT DATALOGGER

• Measure True RMS AC Voltage (600V) or Current (200A)
• Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
• LCD indicates time/date, current readings and Min/Max
• Normal, Peak and Capture (user-specified trigger level) recording modes

EXTECH PRC30: MULTIFUNCTION PROCESS CALIBRATOR

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD

EXTECH UM200 HIGH RESOLUTION MICRO-OHM METER

• 6 ranges with 3 sub-ranges in each current range
• Measurement of resistive and inductive materials
• 5-Digit backlit LCD, PC interface
• Auto or Manual ranging, 10A maximum test current
• Store/Recall up to 3000 measurements

EXTECH CB10: AC CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate 110V to 125VAC Circuit Breakers and Fuses
• Variable Sensitivity adjustment to pinpoint correct circuit breaker
• Bright Red and Green LEDs indicates if receptacle is correctly wired or six fault conditions
• Push button GFCI test
• Audible and visual circuit breaker indication

EXTECH MA260 TRUE RMS 200A AC OPEN JAW CLAMP METER

• Smart Auto Sensing technology enables the meter to recognize the input and automatically switch to the correct mode of operation
• For AC Voltage, Auto Sense feature evaluates input signal and adjusts Input Impedance to eliminate effects of ghost voltages
• 0.6" (16mm) open jaw size
• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Built-in non-contact voltage detector with LED indicator
• 10,000 count backlit LCD display

EXTECH CB20: CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate Circuit Breakers and Fuses
• Receptacle Tester (Transmitter): Test GFCI circuits, LED indication of 2 test conditions and 6 wiring faults, Test Reversed/Open Connections
• Complete with Receiver, Transmitter and 9V battery
• Microprocessor-based automatic sensitivity adjustment, Audible and visual indication, low battery indicator, Ergonomic design

EXTECH EX503 10 FUNCTION HEAVY DUTY INDUSTRIAL MULTIMETER

• Averaging DMM with 10 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 10A max Current

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH PRT200 NON-CONTACT PHASE SEQUENCE TESTER

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement

EXTECH 401027 POCKET-SIZE FOOT CANDLE LIGHT METER

• Easy to operate Foot candle light meter with 2 ranges
• Convenient pocket size design
• Overrange indication