The LT45 LED light meter is useful for measuring and optimizing environmental light levels in a wide range of environments, including office buildings, manufacturing plants and warehouses, university campuses, schools, hospitals, and many other locations. OSHA regulates workplace lighting because illumination must be adequate for assigned tasks, and light meters are used to verify regulatory compliance, as well as state and local public safety codes and ordinances. Use of LED lighting is on the rise because it is more efficient to operate, it emits stable, high quality illumination, and the technology is dropping in price. The LT45 comes with a 9-volt battery, protective sensor cover, hard case, and user manual.

Features:

� Measure White, Red, Yellow, Green, and Blue LED and Standard Lighting in Lux or Foot-Candle (Fc) units

� Manually store/recall up to 99 readings

� 4000 count LCD display

� Cosine and color corrected measurements

� Min/Max Average and Auto Power Off

� Complete with light sensor with protective cover and coiled cable expandable to 59" (1.5m), 9V battery, and hard carrying case

Recommended options

More products EXTECH

EXTECH EX210T TRUERMS DIGITAL MULTIMETER WITH IR

• True RMS for better accuracy when measuring distorted waveforms
• Built-in IR Thermometer with 4:1 distance to target ratio and laser pointer
• 2000 count large backlit dual LCD with easy-to read digits
• Low current capability with resolution to 0.1µA
• Input fuse protection

EXTECH DT200 LASER DISTANCE METER

• Measures from 2" to 115' (0.05 to 35m)
• Laser measurement accurate to 0.08 inches at 32 feet
• Historical Storage recalls the previous 10 records (measurements or calculated results)
• Automatically calculates Area and Volume
• Indirect measurement using Pythagorean theorem

EXTECH MG300 13 FUNCTION WIRELESS TRUE RMS MULTIMETER/INSULATION TESTER

• Wireless USB interface transmits measurement data to a PC
• Backlit super large triple display
• 125V, 250V, 500V, and 1000V test voltages
• Insulation Resistance from 0.001MOhm to 4000MOhm
• Auto discharge of capacitive voltage

EXTECH MO230 POCKET MOISTURE METER

• Displays moisture in wood and other building materials plus Air Temperature and Relative Humidity
• Digital LCD readout with analog bargraph and numerical displays
• Simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, Max moisture values, and programmable wet/dry indication
• Use on wood, paper, wall board, sheet rock, cardboard, plaster, concrete, and mortar

EXTECH EA31 EASYVIEW™ LIGHT METER

• Compact and rugged design with large display
• Low range model measures to 2,000Fc/ 20,000Lux
• Data Hold and Min/Max readings
• Auto power off

EXTECH MA3018 3000A TRUE RMS AC FLEX CLAMP METER

• Measure AC Current up to 3000A
• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Flexible 18" (45.7cm) clamp jaw easily wraps around bus bars and cable bundles
• 7.5mm cable diameter fits into tight spaces and around large conductors
• Measures AC Current in three ranges
• 3000 count backlit LCD display

EXTECH HT200 HEAT STRESS WBGT (WET BULB GLOBE TEMPERATURE) METER

• Meter accurately determines the Heat Stress level by factoring a combination of humidity, temperature, air movement, and direct solar radiation
• Uses a capacitance sensor to accurately measure Wet Bulb Globe Temperature (WBGT), Black Globe Temperature (TG), Relative Humidity (%RH), Air Temperature (TA), Wet Bulb (WT) and Dew Point (DEW)
• Black Globe Temperature (TG) monitors the effects of direct solar radiation on an exposed surface
• In/Out function displays the WBGT value with or without direct sun exposure

EXTECH CT80: AFCI, GFCI AND AC CIRCUIT ANALYZER

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

EXTECH 475040-SD FORCE GAUGE DYNAMOMETER WITH DATALOGGING

• Features 5000g, 176 oz. and 49 Newtons measurement capacity
• Large dual backlit LCD with reversible display feature to match viewing angle
• Record data on SD card
• Updates reading every 0.2 seconds and sample rate is 1 second to 9 hours
• Integrated load cell measurement transducer

EXTECH SDL710 DIFFERENTIAL PRESSURE MANOMETER/DATALOGGER

• Record/Recall Max/Min readings
• Data Hold and Auto power off with disable
• Large LCD display with backlighting
• Zero function for offset correction or measurement