Extech 480403: Motor Rotation and 3-Phase Tester

Code: Extech 480403


 

Datasheet PDF, 0.24 Mb

Description

Tests phase sequence and motor rotation

The 480403 Phase Sequence and Motor Rotation Tester has a 40 to 600-Volt rated range for testing phase orientation of 3-phase power sources over a 2 to 400Hz frequency range. LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each of the phases is live. In addition, it indicates rotation direction of the motor to ensure that it doesn't get damaged from incorrect wiring. Meter comes complete with cable and three large color coded alligator clips, pouch case, and 9V battery.

 

Features:

  • Indicates rotation direction of the motor
  • Determine rotation of a motor without contact
  • LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each of the three phases is live
  • Double molded durable housing
  • Easy to use alligator clips with wide jaws
 

More products EXTECH

EXTECH DM110 MINI POCKET MULTIMETER

• Autoranging with 10 functions including Frequency, Capacitance, and Duty cycle
• Large high contrast 4000 count LCD display
• Auto Power off to conserve battery life
• Autoranging with Relative and Data Hold

 

EXTECH MN15A DIGITAL MINI MULTIMETER

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Continuity, Diode Test and Type K Temperature
• 1.5V and 9V Battery test function
• Complete with 9V battery, general purpose Type K bead wire probe and test leads

 


EXTECH HD400 HEAVY DUTY LIGHT METER

• Large backlit LCD display with 40-segment bar graph
• Wide range to 40,000Fc or 400,000 Lux
• Cosine and color corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Peak mode (10mS) captures highest reading

 

EXTECH CO250 PORTABLE INDOOR AIR QUALITY CO2

• Checks for Carbon Dioxide (CO2) concentrations
• Calculates statistical weighted averages of TWA (8 hour time weighted average) and STEL (15 minute short term exposure limit)
• Maintenance free NDIR (non-dispersive infrared) CO2 sensor

 

EXTECH MO50 MOISTURE METER

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Audible Alert - tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

 

EXTECH MA250 200A AC CLAMP METER + NCV

• Built-in non-contact Voltage detector with LED alert to quickly check for the presence of live wires before testing
• 1.2" (30mm) jaw size for conductors up to 500MCM
• 4,000 count LCD display
• Multimeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode, and Continuity
• Relative Mode for Capacitance Zero and Offset Adjustment

 

EXTECH MO53 PINLESS MOISTURE METER

• Pinless moisture measurement depth to <0.75" (20mm)
• Measures Moisture up to 99.9% for Wood and 56.5% for other building materials
• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Audible Alert - Tone rate beeps faster as the moisture level increases

 

EXTECH 475040-SD FORCE GAUGE DYNAMOMETER WITH DATALOGGING

• Features 5000g, 176 oz. and 49 Newtons measurement capacity
• Large dual backlit LCD with reversible display feature to match viewing angle
• Record data on SD card
• Updates reading every 0.2 seconds and sample rate is 1 second to 9 hours
• Integrated load cell measurement transducer

 

EXTECH EMF510 EMF/ELF METER

• Measure EMF/ELF levels in milliGauss (mG) or microTesla (µT) up to 2000mG (200µT) with two ranges to choose from
• Built-in single axis sensor provides basic accuracy reading of ±5%
• 30 to 300Hz bandwidth
• Backlit display to view in dimly lit areas
• Data Hold and Min/Max functions