Works with Mobile/Cellular Radio Test Sets: HP 8924
>80 dB Typical RF Isolation
On-The-Air Test TX, RX Functionality Without Direct Cable connection to Cell Phone Data Port
Flat Coupling Response over 700 MHz - 2 GHz
Custom Configurations Available
Phone Placement Fixture Assures Test Repeatability

Electrical Specifications

Frequency Minimum	700 MHz
Frequency Maximum	2 GHz
Coupling Factor	1850 MHz - 1990 MHz <11 dB 824 MHz - 894 MHz <8dB Note: Typical, to resonant dipole 1 in. from coupler surface.
Typical Coupling Factor Repeatability	±1 dB
Typical Internal RF Absorption	1800 - 2000 MHz Q<2 800 - 1000 MHz Q<2
Typical RF Isolation	1 MHz - 2 GHz >80 Db

Standard accessories

Chamber calibration from 1.0 GHz to 40 GHz per IEC 61000-4-21
Two Year Warranty
One Type N and one Type K connector for horns
Two double ridged horn antennas (mounted)
One vertical, one horizontal tuner, with stepper motors
SMART 1000 Mini-Reverb Assembly

Recommended options

More products ETS-LINDGREN

QUAD-RIDGED OPEN BOUNDARY HORN ANTENNA 400 MHZ..10 GHZ ETS-LINDGREN 3164-10

• Frequency Minimum 400 MHz
• Frequency Maximum 10 GHz
• VSWR Ratio (AVG) 5:1 maximum, 1.75:1 average
• Maximum Continuous Power 100 watts @ 400 MHz, 20 watts @ 10 GHz
• Impedance (Nominal) 50 ?

MONAXIAL HELMHOLTZ COIL WITH LOW FREQUENCY UNIFORM MAGNETIC FIELD

• Excellent for Magnetic Immunity Testing
• A Source for Calibration
• Custom Models Available

PRECISION SLEEVE DIPOLE ANTENNA FOR RIPPLE TEST MEASUREMENT IN MOBILE COMMUNICATION & CTIA INTERNET 450..5000 MHZ ETS-LINDGREN 3126

• Range of Frequencies to Cover Wireless Device Bands: 450�5000 MHz
• Meet CTIA +/- 0.1 dB Symmetry Requirement
• Precision Gain for Range Calibration

POWER FILTERS FOR RFI/ EMI RADIATION PROTECTION WITH LOW EARTH LEAKAGE CURRENTS 6..100A ETS-LINDGREN N242X

• Suitable for mobile installations
• Extremely low current leakage
• Over 100dB insertion loss from 150 kHz to 10 GHz
• Fully accessible end chambers
• RoHS compliant and CE marked for compliance with the low voltage directive

ELECTRIC & MAGNETIC FIELD RF INDUSTRIAL COMPLIANCE TESTER 10..42 MHZ ETS-LINDGREN HI-3408

• 13.56 MHz, 27.12 MHz, 40.68 MHz Cal Frequencies
• Field Intensity Bar Graph
• On-Board Data Logging and Review
• Low Cost EMF Detection
• Electric and Magnetic Field Strength Measurements
• Data Logging (Up to 112 Points)

FIELD GENERATING PYRAMIDAL HORN ANTENNA FOR EMC AUTOMOTIVE TESTING GMW 3097 AND ES-XW7T-1A278-AC 1.2..1.4 GHZ ETS-LINDGREN 3162-01

• Frequency Minimum 1.2 GHz
• Frequency Maximum 1.4 GHz
• Connectors Type N
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 550 W
• Pattern Type directional
• GMW 3097
• ES-XW7T-1A278-AC

MAGNETIC SHIELDED COIL ANTENNA LOW FREQUENCIES 20 HZ..500 KHZ ETS-LINDGREN 7604

• Frequency Minimum 20 Hz
• Frequency Maximum 500 kHz
• Connectors Type BNC
• Impedance (Nominal) 50 ?
• Pattern Type omnidirectional
• Polarization linear

DOUBLE-RIDGED WAVEGUIDE HORN ANTENNA FOR EMC MEASUREMENTS 1..18 GHZ ETS-LINDGREN 3117

• Frequency Minimum 1 GHz
• Frequency Maximum 18 GHz
• Connectors Type N
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 300 W
• Pattern Type directional
• Peak Power 400 W
• Polarization linear

ELF MAGNETIC FIELD SURVEY METER 5..2000 HZ ETS-LINDGREN HI-3627

• 5 - 2000 Hz
• 0.2 mG - 20 G
• Three Concentric Orthogonal Field Sensors
• True RMS Detection
• Isotropic Response
• 100dB Dynamic Range

CONICAL LOG SPIRAL ANTENNA 100 MHZ..1 GHZ ETS-LINDGREN 3103

• Frequency Minimum 100 MHz
• Frequency Maximum 1 GHz
• Connectors Type N (f)
• Impedance (Nominal) 50 Ohm
• Maximum Continuous Power 100 W
• Pattern Type directional
• Peak Power 100 W
• Polarization circular
• VSWR 1.6:1
• Two Year Warranty
• Extremely low VSWR