GTEM Test Cell for EMC Radiated Emissions & Immunity ETS-Lindgren 5411

Code: ETS-Lindgren 5411

Datasheet

PDF, 0.93 Mb

Description

Frequency: DC - 20 GHz (RI) ² 9 kHz - 5 GHz (RE) ¹
Post Production
For all Phases of EMC Testing - Design Qualification - Pre-Compliance
Full Compliance IEC 61000-4-3 ANSI C63.4

Electrical Specifications

Feed Connector Type

cw 7/16 DIN to N Adapter

Field Uniformity

f 1 GHz, 0 -6dB

Frequency

9 kHz - 5 GHz (RE) ¹
DC - 20 GHz (RI) ²

Input Impedance

50 ?

Maximum CW Input

1 kW

Shielding Effectiveness

10 kHz - 1 GHz
From Internal E-Fields 80 dB min

VSWR Maximum

All Other Freq 1.50:1
Characteristic Freq 1.75:1

VSWR Typical

All Other Freq 1.30:1
Characteristic Freq³ 1.75:1

Standard accessories

Two AC receptacles
Forced air ventilation
Working supervisor for installation is provided. (Outside North America, call factory)
Removable bolt-on feed section
Additional maintenance kit
Three N-type connectors
Customer will need to provide manpower and specific tools
Shipped disassembled
Air compressor for manipulator brake system
Manual emissions correlation software (on request)
5400 GTEM! Series manual
7/16" DIN to type "N" adaptor
One fiber optic penetration
ETS-Lindgren absorber material
One 20 amp, 2 line filter
Mobile base with locking casters
Blank feed-thru panel without frame
Additional copy of emissions correlation software
Primary door 27" W x 36.42" H clear opening (68.6 cm x 92.5 cm)
Individually characterized with results of TDR and VSWR tests

Recommended options

Window with frame (added to primary door)
Blank feed-thru panel, installed
GTEM! Theory and training - 2 days
Power distribution box
Additional 30 amp filter, three phase
Feed-thru panel with 3 "N" connectors and 1 fiber optic penetration, uninstalled
Secondary door with window
Secondary door without window
Blank feed-thru panel, uninstalled, no frame assembly
Additional 20 amp filter, single phase
Automated manipulator
Dual telephone filter (same as RP59001)
AC power filter, .5 amps, 120 V
High voltage feed section
Additional primary door without window
Manual manipulator
DC power filter with banana jacks
Illumination kit
Pneumatic brake kit upgrade for manipulators with electric brake systems
Additional 30 amp filter, single phase

More products ETS-LINDGREN

BROADBAND E-FIELD MONITORING SYSTEM 10 KHZ..40 GHZ ETS-LINDGREN HI-6100 E-FIELD MONITOR

• HI-6100 Field Monitor with 4 Probe Input Channels
• Large Color LCD Display
• IEEE-488, RS-232, USB Interfaces
• USB & RS232 Interface Modules available for Record & View measurements
• Electric Field Probes for 10 kHz..40 GHz frequencies

PRECISION SLEEVE DIPOLE ANTENNA FOR RIPPLE TEST MEASUREMENT IN MOBILE COMMUNICATION & CTIA INTERNET 450..5000 MHZ ETS-LINDGREN 3126

• Range of Frequencies to Cover Wireless Device Bands: 450�5000 MHz
• Meet CTIA +/- 0.1 dB Symmetry Requirement
• Precision Gain for Range Calibration

DOUBLE-RIDGED WAVEGUIDE HORN ANTENNA 100 MHZ..1 GHZ ETS-LINDGREN 3112

• Frequency Minimum 100 MHz
• Frequency Maximum 1 GHz
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 800 W
• Maximum Power 2 kW

CONICAL LOG SPIRAL ANTENNA 1..10 GHZ ETS-LINDGREN 3102

• Frequency Minimum 1 GHz
• Frequency Maximum 10 GHz
• Connectors Type N (f)
• Impedance (Nominal) 50 Ohm
• Maximum Continuous Power 50 W
• Pattern Type directional
• Peak Power 100 W
• Polarization circular
• VSWR 1.6:1
• Extremely low VSWR

VLF MAGNETIC FIELD SURVEY METER 2..400 KHZ ETS-LINDGREN HI-3637

• 0.06 mG - 400 G (with 100X probe)
• 2 - 400 kHz
• True RMS Detection
• Three concentric orthogonal field sensors

RF ELECTROMAGNETIC SURVEY METER ETS-LINDGREN HI-2200

• Handstrap & Safety Lanyard Mount
• Optional Fiber Optic Link
• Interchangeable Probe Heads
• Small/Lightweight for minimal field perturbance
• Broadband Frequency Range
• Economical Solution to Broadcast/Telecom Safety Monitoring Needs & Environmental Monitoring

HIGH PERFORMANCE POWER FILTERS FOR TEMPEST/ EMI/ EMC TEST CURRENTS 16..200A ETS-LINDGREN N500X

• Low power dissipation
• Compact Rugged Construction
• 100dB insertion loss from 40kHz
• Suitable for 400Hz supplies
• Current Range 16 to 200 Amperes

HORIZONTAL/ VERTICAL ELECTRIC FIELD GENERATOR 10 KHZ..30 MZ ETS-LINDGREN 5502

• Generates vertical or horizontal electric field
• Generates Fields 200 v/m in the 10 kHz to 30 MHz Frequency Range
• Fully Adjustable Height and Separation of Main Conductors
• Large Immunity Volume
• Chamber Supported

GTEM TEST CELL FOR EMC RADIATED EMISSIONS & IMMUNITY ETS-LINDGREN 5407

• Frequency: DC - 20 GHz (RI) 2 9 kHz - 5 GHz (RE) 1
• Post Production
• For all Phases of EMC Testing - Design Qualification - Pre-Compliance
• Full Compliance IEC 61000-4-3 ANSI C63.4

UNIVERSAL SPHERICAL DIPOLE EMI RADIATION SOURCE ETS-LINDGREN USDS

• Portable EMI Source for Quick Test Site Characterization and Site-to-Site Comparisons
• Horizontal and Vertical Polarizations
• Selectable Pulse Mode for Testing Quasi-Peak Detectors
• 10 MHz - 10 GHz Frequency Range
• Four Switch Selectable Fundamental Frequencies: 10 MHz, 64 MHz, 100 MHz,133 MHz

Feed Connector Type	cw 7/16 DIN to N Adapter
Field Uniformity	f 1 GHz, 0 -6dB
Frequency	9 kHz - 5 GHz (RE) ¹ DC - 20 GHz (RI) ²
Input Impedance	50 ?
Maximum CW Input	1 kW
Shielding Effectiveness	10 kHz - 1 GHz From Internal E-Fields 80 dB min
VSWR Maximum	All Other Freq 1.50:1 Characteristic Freq 1.75:1
VSWR Typical	All Other Freq 1.30:1 Characteristic Freq³ 1.75:1