Power Supplies Electronic Loads | INSTEK

• 50 Sets memory
• Self test and software calibration
• Meets UL, CSA, IEC safety regulation
• Auto step running with timer setting

 

• Auto Step Running With Timer Setting
• FRONT/REAR Output and Sense Switch Selectable
• Triple Output
• Auto Series and Parallel Operation
• Auto Tracking

 

• Intelligent fan control (changes by output power)
• 100 Sets memory
• Auto step running with timer
• Provided auto series and parallel function

 

• Output on/off
• Tracking Series and Parallel mode
• Smart cooling fan achieving low noise
• USB Standard Interface

 

• Output Voltage Rating : 80V/800V
• Output Power Rating : 400W~800W
• Constant Power Output for Multi-Range(V&I)Operation
• Series and Parallel Operation(2 Units in Series or 4 Units in parallel Maximum)

• Output ON/OFF
• Analog Control (Remote I/O) for Output ON / OFF
• Set View function for checking an original V / I setting during output on
• Key Lock Function

 

• Tracking Operation and Auto Series/Parallel Operation
• Output ON/OFF Switch
• Output Voltage and Current Setting When Output Disable
• Fan Speed Control Circuit to Minimize Fan Noise

 

• Auto Series and Parallel Operation
• Constant Voltage and Constant Current Operation
• Low Ripple and Noise
• Internal Select for Continuous or Dynamic Load

 

• Remote output on/off control
• OVP to protect the DUT
• OTP to protect SPD-3606 to decreas the repair rate
• Compact size, light weight

 

• Arbitrary Waveform Power Output
• Power Amplifier of External Signal
• Measurement Functions: Voltage, Current, Power ,Frequency, Power Factor,CF,and Harmonic Current
• Capacitor Input Load Supported

 

• Low Ripple & Noise
• Measurement and test functions include VOLT?CURR?PWR?SVA?IPK?IPKH?FREQ?PF?CF
• Support a small AC current measurement 2mA ~ 35A, Min. resolution 0.01mA(APS- 7050& APS-7100)
• Reverse Current Alarm Function

 

• Only 88mm(2U) case height
• Measurement function comprises Voltage, Current, Power, Current(peak), Frequency, Power Factor
• 10 sets of the Test mode simulate power transient output
• 10 sets of Preset allow users to store ten settings

 

• Stable and Low-Distortion Output Waveforms
• Software Calibration to Ensure Accuracy
• Panel-Lock Function to Prevent Operation Error
• Frequency,Volt,Amp,Watt and Power Factor Display

 

• Commands are compatible with Kikusui PLZ-4W model.
• Dynamic(Switching) Function:0.0166Hz ~20kHz
• Soft Start Function:Off / On(1~200ms, Res:1ms)
• Adjustable OCP / OVP / OPP / UVP Setting
• Short Circuit Function

 

• OCP?OPP test Automation
• Max. Slew Rate: 2.5A/us
• Dynamic mode
• Protection: OVP, OCP, OPP, OTP, RVP, UVP
• Remote Sense

 

• Multiple independent load inputs up to 8 channels in a mainframe
• Parallel connection of inputs for increased load capacity
• Parallel connection of inputs for static and dynamic tests
• OPP/OCP/OVP/OTP protections