The PPT Series are 3-channel, programmable linear DC power supplies with 138/126W outputs. The PPT Series feature OVP and OCP protection and are compliant with all major safety standards (UL, CSA, and IEC) for safe, reliable operation. For extra precision, the PPT Series include remote sensing that add an extra level of precision by compensating cable losses between loads. The digital interface and smart features simplify operation and configuration with output limit store/recall functions, automatic tracking, automatic tracking, automatic series or parallel operation (PPT-Series), and auto stepping for continuous testing. The series have Labview drivers and SCPI commands as standard for remote control and PC interfacing via GPIB(PPT-Series). The Versatile PPT-Series are ideal for high-level applications requiring high resolution, multiple outputs, and an extra level of safety.

Features:

Easy operation with UP/DOWN key
High Resolution: 10mV, 1mA
Over voltage protection, over current protection by hardware
50 Sets memory
Self test and software calibration
Meets UL CSA IEC Safety Regulation
Auto Step Running With Timer Setting
FRONT/REAR Output and Sense Switch Selectable
Triple Output
Auto Series and Parallel Operation
Auto Tracking
IEEE-488.2 and SCPI Compatible Command set
Labview Driver Software Available
High Stability, Low Drift
4 Digit Display

More products INSTEK

GOODWILL INSTEK AFG-3000 SERIES

• Wide frequency range from 1uHz to 80/50MHz
• High 200MSa/s sampling rate
• 16-bit Amplitude Resolution
• Output from any section of 1M-point-long waveform

GOODWILL INSTEK APS-1102A

• Arbitrary Waveform Power Output
• Power Amplifier of External Signal
• Measurement Functions: Voltage, Current, Power ,Frequency, Power Factor,CF,and Harmonic Current
• Capacitor Input Load Supported

GOODWILL INSTEK GPT-9600 SERIES

• Auto W-I or I-W Mode
• ARC Detection
• True RMS Current Measurement
• Zero Crossing Turn-on Operation

GOODWILL INSTEK PPE-3323

• 50 Sets memory
• Self test and software calibration
• Meets UL, CSA, IEC safety regulation
• Auto step running with timer setting

SPECTRUM ANALYZER 9KHZ..3GHZ GW INSTEK GSP-930

• Frequency Range: 9kHz ~ 3GHz
• High Frequency Stability: 25ppb (0.025ppm)
• RBW: 10Hz ~ 10kHz in 1-3 steps, 10kHz ~ 1MHz in 10% adjustable steps
• Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset
• Built-in Measurement Functions: Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO
• Built-in Spectrogram and Topographic Display Modes

GOODWILL INSTEK GDM-8135

• High Voltage 1000V and 20A Current Range
• All Range with Protection Circuit
• 0.1% DCV Accuracy
• Auto Zero Circuit

GOODWILL INSTEK GDM-8261A

• Dual Measurements to perform two selected measurements simultaneously
• Bright Vacuum Fluorescent Display (VFD)
• Provide AC+DC Voltage or Current Measurement Functions
• 11 Measurement Functions & 10 Math Functions

GOODWILL INSTEK GDM-8034

• 8 Functions AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Diode Test and Audible Continuity Beeper
• High Voltage 1000V and 20A Current Range
• 0.5% Basic DCV Accuracy
• LCD Display

ANALOG OSCILLOSCOPE 2 X 100 MHZ GW INSTEK GOS-6112

• 100 MHz bandwidth, Delayed Sweep
• 2 analog channels
• Cursor Readout with 7 Measurements

GOODWILL INSTEK GLC-9000 LEAKAGE TOUCH CURRENT TESTER

• Touch Panel with Color LCD Display
• 9 Different Measurement Network to Simulate
• the Resistance of Human Body
• 8 Different Types of Leakage current for Medical
• & General Electrical Equipment
• Various Leakage Current Measuring Mode:DC/AC/AC+DC/AC Peak
• Upper & Lower Limitation for PASS/FAIL Judgment
• Meter Mode with SELV/CONV Function
• 50 Preset Test Conditions Conform to IEC 60990;
• 30 Sets Memories for Customer Defined
• Various Standard Interfaces RS232/GPIB/USB Host & Device/EXT I/O