AC current measurement with current ranges up to 2000A
AC/DC voltage and resistance measurements
True RMS display
54mm in diameter of measurable conductor
DC output function
Data hold function
Sleep function
Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. HI 600 V, CAT. II1000 V)

Display (LCD, Digital Counts)	3999
AC Current Accuracy (400A Reference)	1.0+3(50/60Hz) 2.0+3(40~1kHz)
AC Current Accuracy (2000A Reference, 0~1500A)	2.0+3(50/60Hz) 3.0+3(40~1kHz)
AC Voltage Accuracy (40/400V/750V Reference)	1.0+2(50/60Hz) 1.5+3(40~1kHz)
DC Voltage Accuracy (40/400V/1000V Reference)	1.0+2
Resistance Accuracy (400/4k/40k/400kO reference)	1.5+2, Beeps at below 50± 35O (continuity check)
DC Output Accuracy (400A, 0~400mV Reference)	?.5% rdg ± 0.5mV (50/60Hz) ?.5% rdg ± 0.5mV (40~1kHz)
Method of detection	True RMS
Response Time	Approx. 2 seconds
Range Switching	Manual-range (on AC current range) / Auto-range (on AC voltage range, resistance range)
Data hold	On all range
Operating temperature and humidity	0-40°C, 85% RH or less (no condensation)
Influence of external magnetic field	1A or less at 400A/m
Influence of conductor position	± (2.0% rdg + 3dgt) or less
Safety Standard	Conforms EN 61010-1, EN61010-2-031, EN61010-2-032
Circuit voltage	1000Vrms or less
Withstanding voltage	5.55kV AC for one minute
Power Supply	R6P(SUM-3)x2 or LR6x2
Battery Life¹	150 hours
Consumed current	Approx. 5mA
Sleep Function	Automatically powered down in about 10 minutes after the last switch operation
Diameter of measurable conductor	54mm at maximum
Dimensions	Approx. 105(W)x247(H)x49(D)mm
Weight (Approx.)	470g
Accessories	Clamp Adapter (Model 99025), Output Cable for Terminal Screw (Model 91019), Carrying Case (Model 93034), Output Plug (Model 98012), Test Lead (Model 98011) User's manual (IM CL120), batteries
Order Notes	Each item selected MUST be ordered as a separate line item.
Product Notes	All Clamp-on Meters include Test Leads (where applicable) and a carrying case.

Alte produse YOKOGAWA

YOKOGAWA GS200 DC VOLTAGE / CURRENT SOURCE

• Voltage source up to ±32 V and current source up to ±200 mA
• 51/2-digit, 120000-count output resolution
• Voltage and current simple monitoring feature (optional)
• Programmable output up to 10,000 points
• Built-in USB mass storage device
• Channel expansion through synchronous operation

YOKOGAWA DIGITAL MULTIMETER TY720

• True RMS measurement
• New Functions for Electronic and Industrial Use
• Simultaneous measurement and display of DC and AC
• Switchable RMS/MEAN detection

YOKOGAWA MULTIFUNCTION CALIBRATOR CA71 CA51

• Autostep function
• Changes the output value in step form based on the setting from the divided output (n/m) function. Changes can be sourced automatically every 10% or 25%.
• Online communication (CA71 only) RS-232C-compliant optically isolated interface
• Sweep function
• Linearly increases or decrease the output. The increasing/decreasing time can be set to either 16 or 32 seconds.
• Memory function
• Source values and measurements forming individual value sets can be saved to or read from the Handy Calibrator's internal memory (maximum 50 value sets).
• Temperature monitor function

YOKOGAWA AQ2200-651 SG MODULE

• Switchable two clock ranges: 620.0 to 720.0MHz, 155.0 to 180.0MHz
• Synchronize with external equipment: 10MHz reference Input/Output

YOKOGAWA STAND CALIBRARE PRESIUNI PNEUMATICE MC100

• Low temperature coefficient Zero point: ±0.003% of full scale/°C Span: ±0.002% of full scale/°C
• Divided output function with as many as 20 steps
• Auto-step output function
• Sweep output function

YOKOGAWA TESTER DIGITAL IMPAMANTARE EY200 (DIGITAL)

• 2P Test leads (for simplified measurement) has a structure that both the safety alligator clip and the test probe are available
• Warns when earth resistance of auxiliary earth spikes exceeds the permissible limit
• Convenient carrying soft bag for accessories etc.
• 3-Pole Earth Resistance Measurement (Precise Measurement)

YOKOGAWA - DLM2000 OSCILOSCOP DIGITAL MIXT CU CANALE ANALOGICE SI DIGITALE

• Lineup includes 200 MHz, 350 MHz, 500 MHz bandwidth models
• Lightweight and compact
• Large 8.4-inch LCD display
• Long memory: Up to 250 M points (with /M3 option)
• High speed sampling: Up to 2.5 GS/s (1.25 GS/s with 4 ch)

YOKOGAWA - DL850E DL850EV SCOPECORDER

• Voltage & Currents
• Sensor Outputs
• Temperature, Vibration/Acceleration, Strain, Frequency
• Logic Signals & CAN / LIN and SENT

YOKOGAWA CALIBRATOR DE PROCES CA300 CA310 CA320 CA330

• Basic Accuracy: 0.015% (Source&Meas. accuracy of Voltage mA)
• Simultaneously supplies 24V loop power and measure output signal with high accuracy
• Sub display displays span% of the source value
• HART/BRAIN comm. resistance (250O) embedded

YOKOGAWA DIGITAL MULTIMETER TY520

• High Precision
• Basic accuracy 0.09%
• True RMS measurement
• Ensured Field Site Safety