AC/DC current measurements with current ranges up to 300A
24mm in diameter of measurable conductor
Light weight & compact design
Mean value display
Sleep function
Approved for comformity to safety standards EN61010-1, EN61010-2-032 (CAT. III 300 V)

Description	AC/DC Mini Clamp-on
Method of detection	Mean Value
Display	LCD (Digital display: 3999 counts)
DC Current Range	40/300A
DC Current Resolution	0.01A
Response Time	Approx. 2 second
Range Switching	Auto-range
Data hold	On all range
Operating temperature and humidity	0 - 40°C, 90% RH or less (no condensation)
Influence of external magnetic field	1A or less at 400 A/m
Influence of conductor position	±(2% rdg + 5dgt) or less
Safety Standard	Conforms EN61010-1, EN61010-2-031, EN61010-2-032
Circuit voltage	300 Vrms or less
Withstanding voltage	3.7 kV AC for one minute
Power Supply	LR-44 x 2 (3V) SR-44 x 2
Battery Life	Approx. 11 hours (continuous)
Consumed current	Approx. 9 mA
Sleep Function	Automatically powered down in about 5 minutes after the last switch operation
Diameter of measurable conductor	24 mm at maximum
Dimensions	Approx. 59 (W) x 147 (H) x 25 (D) mm
Weight	Approx. 100 g
Accessories	Batteries, carrying case (93033) User's manual (IM CL235)

Alte produse YOKOGAWA

YOKOGAWA CLESTE POWERMETRIC MASURATORI PUTERE CW10 (SINGLE-PHASE)

• AC / DC Power up to 600 kW, AC / DC Voltage max. 1000 V, AC / DC Current max. 600 A
• True RMS for AC .
• Harmonics 1st to 25th order
• Power fluctuation using the ACA Inrush and Peak hold functions.
• Frequency, Resistance, Continuity, Diode check, Power factor.

YOKOGAWA GS200 DC VOLTAGE / CURRENT SOURCE

• Voltage source up to ±32 V and current source up to ±200 mA
• 51/2-digit, 120000-count output resolution
• Voltage and current simple monitoring feature (optional)
• Programmable output up to 10,000 points
• Built-in USB mass storage device
• Channel expansion through synchronous operation

YOKOGAWA TESTER DIGITAL IMPAMANTARE EY200 (DIGITAL)

• 2P Test leads (for simplified measurement) has a structure that both the safety alligator clip and the test probe are available
• Warns when earth resistance of auxiliary earth spikes exceeds the permissible limit
• Convenient carrying soft bag for accessories etc.
• 3-Pole Earth Resistance Measurement (Precise Measurement)

YOKOGAWA LOW PRESSURE CALIBRATOR CA700

• IP54 dustproof and water proof case for harsh environments
• 4-20mA step function for signal generation
• 20mA Simulator to carry out loop test.
• Two-wire Transmitter Loop Check

YOKOGAWA DIGITAL INSULATION TESTER MY40

• 3 1/2-digit LCD;
• For each rating, you can save as many as 20 measurements at desired memory address numbers.
• Four AA (R6P) batteries the tester retains the measured resistance for approximately 5 seconds after the MEAS switch is turned off.

YOKOGAWA TESTER ANALOGIC SCURGERI CURENTI 322610 (ANALOG)

• ± 2.5% full scale accuracy
• 100µA full scale value
• Shockproof indicator using taut band movement
• Built-in overload protection circuit
• Handy and easy to carry

YOKOGAWA AQ2170 SERIES PORTABLE OPTICAL POWER METER (SIMPLE & COMPACT)

• Two versions of Power Meters to suit test application
• Compact and lightweight
• Rubber protector to prevent damage when dropped

YOKOGAWA - WT300E POWERMETRU DIGITAL

• Fast display and data update rate: The fast display and a maximum data update rate of 100ms on the WT300E series, offers a short tact time in testing procedures.
• MAX hold function: The maximum values of RMS/PEAK Voltage & Current, Active Power, Reactive Power and Apparent Power can be held.
• Line filter and frequency filter capabilities: These filter functions will cut off unnecessary noise & harmonic components for fundamental waveform measurements.

YOKOGAWA FG400 ISOLATED ARBITRARY/FUNCTION GENERATOR

• Frequency range: Sine wave 0.01 µHz to 30 MHz
• Amplitude resolution: 16 bits
• Sampling rate: 120 MS/s
• Output: 0 to 20 Volts, peak-to-peak

YOKOGAWA PROCESS MULTIMETER CA450

• Simultaneous 24 V loop power and mA measurement
• HART mode setting with loop power (250 OHM resistance)
• High accuracy signal measurement: DC mA 0.05%/30.000 mA
• Handheld DMM function
• Peak/Hold function for DCS power peak-to-peak measurement