The SV 36 acoustic calibrator is a small, portable dual-range Class 1 device (sound source). Powered by two LR03/AAA batteries, it contains a loudspeaker producing acoustic pressure of defined level 94 db & 114 dB at frequency of 1 kHz.

Reference piezoresistive sensor for monitoring generated level, pressure and temperature sensors for measurements of atmospheric conditions and a microprocessor system controlling the operation of the calibrator. Sinusoidal waveform of 1 kHz frequency is digitally generated and feeds the loudspeaker. Sampled signal from the reference piezoresistive sensor indicates the level of currently generated signal in a feedback loop. On the basis of information about the level of the signal, actual values of pressure and temperature, microprocessor adjusts amplification of the loudspeaker signal in order to produce appropriate sound pressure level in the calibrator½s chamber.

Alte produse SVANTEK

SV 34A CLASS 2 ACOUSTIC CALIBRATOR

• Sound Pressure Level (SPL)
• SPL Tolerance
• Frequency Tolerance

SV 100A WHOLE-BODY VIBRATION EXPOSURE METER

• Wireless BT communication
• Auto-detection of the operator
• Weighting filters complying to ISO 2631-1
• Calculation of A(8) Daily Exposure

SV 104IS INTRINSICALLY SAFE NOISE DOSIMETER

• High contrast color OLED display
• Option for octave real-time analysis
• Option for audio events recording (wave format)
• Voice tagging

SV 106A HUMAN VIBRATION METER & ANALYSER

• Six channels for acceleration (IEPE type) and two channels for static force measurements
• Whole-Body measurements with seat accelerometer SV 38V
• Hand-Arm measurements with SV 105A or SV 150 triaxial accelerometers
• Option for time-domain signal recording (meeting ISO 2631-5)

SV 307 NOISE MONITORING TERMINAL

• Removable housing protecting the system against harsh environmental conditions (IP66)
• Integrated remote system check for full system verification
• Integrated high speed 3G modem

SV 103 VIBRATION DOSIMETER

• Personal Daily Vibration Exposure Meter complying to ISO 8041
• Measurement under gloves according to ISO 10819
• Tri-axial accelerometer complying to ISO 5349
• Contact force measurement

SV 80 GENERAL PURPOSE ACCELEROMETER 100MVG

• Supply current 2 mA ½ 10 mA
• Supply voltage 22 V ½ 28 V
• Bias voltage +12 VdC

SV 81 GENERAL PURPOSE ACCELEROMETER 500 MVG

• Sensitivity (½ 5 %) 50 mV/(ms-2) ~ 500 mV/g
• Measurement range 0.002 ms-2 rmS ½ 100 ms-2 PEAK
• Resonant frequency 16 kHz

SA 104-5 FIVE-WAY DOCKING STATION

• Power supply SA 33, 12 VDC, min. 1.2A
• Charging contacts voltage 5.6 VDC Umax = 6.6 V

SV 200 NOISE MONITORING STATION

• Class 1 according to IEC 61672
• Integrated high speed 3G or Wi-Fi modem
• Automatic time synchronization
• Large windscreen against high-speed wind