250 Ampere current source
4 current-source outputs (i.e., 5 A @ 120 Vac, 25 A @ 24 Vac, 120 A @ 6 Vac, 250 A @ 3 Vac)
4-line by 20-character LCD display
Provides external current input (0-10 A)

The Vanguard MCCB-250 is a programmable, high-current source designed specifically for testing molded-case circuit breakers, thermal magnetic and solid-state overload motor-protection relays.

Built-in Timer

The MCCB-250’s built-in timer can test the

time-delay characteristics of protection relays

and molded-case circuit breakers. Once

the test is initiated, the current source and the

timer are automatically turned on at the next

zero-crossing point of the AC. The timer stops

when the MCCB-250 input detects a change

in the dry contact or voltage input, or detects

the removal of the test current. The test results

are then displayed in milliseconds and

fractions of cycle(s) on the unit’s back-lit LCD

screen (20 characters by 4 lines).

Current Source

The MCCB-250 has 4 current-source outputs

(5 A @ 120 Vac, 25 A @ 24 Vac, 120 A @ 6

Vac, 250 A @ 3 Vac) that conduct the test

current through the high-impedance load circuits.

Each current source can tolerate shortduration

over-loads up to 4 times the rated

current (1000 A max). This feature is used

for testing the instantaneous trip element of

molded-case circuit breakers. When using

this feature, the selected test current is displayed

on the LCD screen. When the MCCB-

250 is used as a current source, the currentfl

ow time (the current-on period) is displayed

External Current Input on the LCD screen.

The MCCB-250 also provides an external current

input (0 - 10 A). Both internal and external

current source readings can be viewed at

the same time.

Standard accessories

Part number MCCB-250 MCCB-250 and cables

Part number MCCB-250-CASE MCCB-250 shipping case

Part number MCCB-250-10FT MCCB-250 test leads - 10 foot

Part number MCCB-250-20FT MCCB-250 test leads - 20 foot

More products VANGUARD

DIGITAL BREAKER ANALYZER FOR CONTACT & SWITCH TIMING VANGUARD CT-3500

• Dry-contact inputs: 3 channels
• Trigger input voltage open/close: 30 � 300 V, DC or peak AC
• Breaker operations: Open, Close, Open-Close, Close-Open
• Timing resolution: ±0.1 millisecond
• Detect Main & Insertion Resistor Contacts on same input
• USB computer interface
• Built-in 2.5" wide Thermal Printer

TRANSFORMER TURN RATIO TESTER VANGUARD ATRT-01

• Displays turns-ratio from 0.8-15,000
• Calculates turns-ratio percentage error
• Displays winding polarity and phase angle
• Displays excitation current
• Battery or AC-powered (ATRT-01B S3 only)
• Standalone or computer-controlled

VACUUM BOTTLE TESTER FOR HIGH VOLTAGE CIRCUIT BREAKER TEST VANGUARD VBT-60

• Automatic Testing
• 10 kV to 60 / 80 kV DC output in 5 kV steps
• Selectable dwell time from 5 seconds to 2 minutes
• Digital voltage and current display
• Failure indicator lamp
• Very light-weight

TRANSFORMER WINDING RESISTANCE TESTER VANGUARD TRM-40

• accurately measure resistance values from 1 micro-ohm to 500 Ohms
• Auto-discharge circuit for operator safety
• Demagnetizes transformer after test
• Selectable test current from 1A to 40A
• RS-232C, USB, and Bluetooth computer interfaces
• Built-in thermal printer

DC CIRCUIT BREAKER CONTACT LOW RESISTANCE MICROOHMMETER 200A VANGUARD DMOM-200 S3

• 1 to 200A programmable test current
• Resitance range: 1µ?..10m? at 200A to 1µ?..5? at 1A
• Very lightweight: 19.8 lbs. (8.9 Kg)
• Measures circuit breaker contact resistance with safety ground on (with the Dual Ground option)
• Stores test records on-board or on external USB Flash drive
• Built-in 2.5" wide thermal printer

600A AC PRIMARY CURRENT INJECTION SOURCE FOR RELAY TESTING VANGUARD PCI-600

• Results displayed on a 4-line by 20-character backlit LCD
• Test currents from 10 to 600 amperes AC
• Also has an external-current input (0-10 A)
• timer reading range 1 m.. 2 hours

ON-LOAD TAP CHANGER ANALYZER AND WINDING RESISTANCE ANALYZER ON 3-PHASE TRANSFORMERS VANGUARD LTCA-40

• Auto discharge circuit for operator safety
• 3 resistance reading channels including one dynamic channel
• Digital resistance reading from 1 micro-ohm to 500 ohms
• 60Vdc power supply , outputting 40 amperes
• Calculate equivalent resistance value at reference temperature
• Stores 50 static records and 20 dynamic records
• Built-in 4.5-inch thermal printer

TRANSOFORMER BREAKER CONTACT RESISTANCE MICRO OHM METER 600A VANGUARD DMOM-600

• 10 to 600A programmable test current
• Resitance range: 1.5m? at 600A to 450m? at 10A
• Measures circuit breaker contact resistance with safety ground on (with the Dual Ground option)
• Stores test records on-board or on external USB Flash drive
• Built-in 2.5" wide thermal printer

EHV HIGH VOLTAGE CIRCUIT BREAKER ANALYZER VANGUARD DIGITMR PC

• dry-contact inputs 3 dry-contact channels
• timing windows 1 second, 10 seconds, or 20 seconds
• timing resolutions ±50 micro-seconds @ 1 sec. duration
• Inexpensive, PC-controlled EHV circuit breaker analyzer
• Optional "on-line" timing mode
• Small and light-weight
• Can test contact time, stroke, velocity, over-travel, and contact wipe

MOLDED CASE CIRCUIT BREAKER TESTER VANGUARD MCCB-250

• 250 Ampere current source
• 4 current-source outputs (i.e., 5 A @ 120 Vac, 25 A @ 24 Vac, 120 A @ 6 Vac, 250 A @ 3 Vac)
• 4-line by 20-character LCD display
• Provides external current input (0-10 A)