Shineway 95EA Fusion Splicer

Code: Shineway OFS-95EA


 

Datasheet PDF, 0.28 Mb

Description

ShinewayTech® OFS-95EA optical fiber fusion splicer is designed with high-speed image processing technology and special precision-positioning technology. It will automatically finish the whole fiber fusion process in 9 seconds by fast mode, and splice loss is lower than 0.02dB for single mode fiber. 3.5-inch LCD, dual CMOS monitors, X and Y axis separately display or simultaneously display, thus different fusion stages can be showed clearly. It is compatible with ITU-T SM/MM/DS/NZDS/ED fiber, and isequipped with 4-in-1 holders and SOC adapter.

OFS-95EA has small volume, light weight, AC/DC power supply and  200+ splicing and heating cycles, so it is particularly suited to telecommunications,radio and television, railway, electric power, military, research institutesfor optical fiber communication construction and maintenance. OFS-95EA  is perfect for FTTH installation and maintenance.

 

Features:

?  Compact and convenient:1.5kg with battery

?  Four motors, special precision-positioning technology

?  Splice Loss: SMF/BIF: =0.02dB(typ.); MMF: =0.01dB(typ.); DSF/NZDSF/EDF: =0.04dB(typ.)

?  High precision 4-in-1 holder (250½m/900½m/patchcord/FTTx indoor fiber etc),SOC holder  

?  unique battery and the host separation design, convenient maintenance and replacement of the battery

?  Double V-groove design

?  High strength portable straps design is convenient for hanging and operating

?  Inner light make the operation environment in the dark

?  Wind, sand and dust prevention, waterproof, aseismatic design adapt to the outdoor environment

?  Display screen can be flip before and after, can conveniently multi-angle observe

?  76cm drop proof / ISTA certificate

?  Optional GPS function

 

More products SHINEWAY

OPTICAL FIBER POWER METER/ LASER SOURCE LOSS TEST SET SHINEWAY OPM-15/ SLS-21

• OPM-15 Optical Power Meter
• SLS-21 Stabilized Laser Sources
• Applicable on singlemode/multimode fibers
• Quick response, no warm-up
• Interchangeable connectors: FC/SC/ST

 

POLARISATION MODE DISPERTION FOR OPTICAL FIBERS CWDM SHINEWAY MTP-500

• ITU-T G.650 recommended method for PMD characterization:
• Accurate total PMD, PMD coefficient
• Fully support 10G/40G/100G DWDM optical network upgrade test
• Compliant with G.650.2, EIA/TIA FOTP-124 & IEC-61941
• High dynamic range for long span measurement 40dB or 200Km
• Easy to use touch screen
• External ports: RG45x1, RS232x1, USBx2, VGAx1

 

SHINEWAY CAA-100A CABLE & ANTENNA ANALYZER

• Intelligent limit /marker /curve calculations
• More than 8 hours long battery life
• 7 inch color LCD touch screen
• Optimized batch file management: edit/delete/filter

 

VISIBLE LASER SOURCE SHINEWAY VLP-10/ VLS-20

• Pocket-size/pen-size, easy to use
• Fast response, no warm up
• CW/1 Hz mod
• 10Km for Max.measurement Range
• CE, FCC, FDA certificates
• One meter drop test

 

SDH/PDH/STM/E1 DATA TRANSMISSION ANALYZER SHINEWAY DTA-SDH/155

• Analysis and evaluation of SDH and PDH networks andequipment up to 155Mbps.
• According to ITU.T G.821, G.826, G.828,G.829, M.2100, M.2101.
• Tandem Connection Monitoring (TCM) and APid tests.
• Support pointer adjustment test.
• Automatic Protection Switching (APS).
• Round trip delay measurement (STM-1 and E1).

 

SHINEWAY OFI-50A CABLE IDENTIFIER

• Easy to use, reliable
• Fast identification of deep buried, overhead and pipe fiber cable
• Built-in intelligent mode, knock in the measured cable screen showed positive and negative Pyramid strength; output the notification sound

 

SHINEWAY OVA-50 INTELLIGENT OPTICAL VARIABLE ATTENUATOR

• Network/BER testing
• Power meter calibration
• Link loss simulation
• Optical margin analysis

 

GIGABIT/BER ETHERNET TESTER SHINEWAY GET-100

• Electrical and optical ports with rate at 10/100/1000Mbps
• Ergonomic, creative design, and easy to carry
• IEEE 802.3, RFC1242, RFC2544 compliant
• L1/L2/L3 BER Test
• Full RFC2544 benchmark test
• Support VLAN test function
• Jitter Test

 

SHINEWAY MTP-200-CWDM SERIES HAND-HELD HIGH PERFORMANCE OTDR

• Up to 18CWDM wavelengths, customized
• Dynamic Range up to 36dB
• Short dead zone:EDZ 1m, ADZ 4m
• Auto/Manual test and analysis

 

OPTICAL FIBER IDENTIFIER SHINEWAY OFI-20A/ OFI-20B

• Fiber types: 250µm, 900µm, 2mm/3mm jacketed fiber
• Non-destructive detection
• Indication of signal presence, strength and direction
• CW/MOD tones detection
• Buzzer indication
• Handheld & sturdy
• CE, FCC certificates