The MO-162 / MO-163 is a direct QPSK to COFDM transmodulator. It is built in a 1 unit for 19" rack according to the ETSI EN 300 744 v1.5.1 DVB-T specification.

Allows selection of a number of services from a satellite transponder within the satellite IF band from 950 to 2150 MHz and modulates them directly within a COFDM Digital Terrestrial Television multiplex in the 475 to 875 MHz / 45 to 875 MHz range.

The digital codification and modulation process has been implemented over own PROMAX intellectual property programmable logic devices. This is the reason why we can warrant an optimal yield with a very competitive cost.

The MO-162 / MO-163 is ideal for TV distribution applications specially when the advantages of COFDM modulation is required but at same time the distribution cost per programme has to be within a budget.

Services included in the transport stream can be audio, video or data in MPEG-2, MPEG-4 formats and can correspond to free to air or encrypted programs in standard definition (SDTV) or high definition (HDTV).

INPUTS QPSK INPUT MPEG-2 TS INPUT	950 - 2150 MHz / -65 dBm to -25 dBm F female connector 2x DVB-ASI, 75 ? BNC female connector TS packets of 188 or 204 bytes (auto detect) Const. avg. TS packet rate in slave mode (no packet stuff) Packet stuffing and PCR re-stamping in master mode
OUTPUTS IF OUTPUT RF OUTPUT	Fixed at 36 MHz (when RF output is off) / 0 dBm fixed 475 - 875 MHz (45 - 875 MHz for MO-163)(1 Hz steps) -87 to -27 dBm (1dB steps, optional up to +6 dBm)
PROGRAM SELECTION	Transponder selection by frequency and Service selection without table rebuilding (PID Filtering)
DVB-T PARAMETERS IFFT SIZE GUARD INTERVALS CODE RATES CONSTELLATIONS CHANNEL BANDWIDTH MFN OPERATION	2k, 8k 1/4, 1/8, 1/16, 1/32 1/2, 2/3, 3/4, 5/6, 7/8 QPSK, 16QAM, 64QAM a = 1, 2, 4 6, 7, 8 MHz (user-selectable) Available
REMOTE CONTROL	Fast Ethernet (RJ45 Connector) (Optional: SNMP Protocol)

Recommended options

	OPTIONS
OP-170-E	Noise generator to test C/N. SFN/MFN Mobile and Fix channels simulator (Upgrabable in factory only)....
OP-170-H	DVB-H generator (Upgrabable in factory only)....
OP-1XX-P	+6 dBm output power..
OP-1XX-S	SNMP Control for MO-180, MO-162 and MO-163...

	ACCESSORIES
EN-264	HDMI, HD-Sdi, YPbPr, RGB Encoder.
MX-008	8 ASI inputs, 2 outputs Re-multiplexer.
TD-500	4x1 two channel combiner..
TD-500-Q	4x1 four channel combiner..
TD-522	22 dBm DVB-T Combiner and Amplifier..

More products PROMAX

RECEIVER CONVERTER OPTICAL FIEBR -> DVB-T RF PROMAX DT-620

• OPTICAL INPUT: From 1100 to 1600 nm
• RF OUTPUT: From 470 MHz to 862 MHz
• optical SC input and an RF type BNC output
• suitable for optical links up to 40 km away

FTTH ANALYZER & OPTICAL FIBER SELECTIVE PON POWER METER GPON PROMAX PROLITE-67

• measuring simultaneously three wavelengths (1310, 1490 and 1550 nm) in FTTH / PON systems
• optimized for GPON architecture
• Visible Fault Locator by laser emission
• Data transfer to PC
• Graphical interface simple and very intuitive, easy-to-use

SATELLITE TRANSMODULATOR QPSK -> COFDM DVB-T PROMAX MO-162/163

• QPSK INPUT: 950 - 2150 MHz / -65 dBm to -25 dBm
• MPEG-2 TS INPUT: 2x DVB-ASI, 75 ? BNC female connector
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 475 - 875 MHz (45 - 875 MHz for MO-163)

COLOR VIDEO SIGNAL PATTERN GENERATOR PAL/ NTSC/ SECAM PROMAX GV-198

• PAL B/G, D/K, I, N, NTSC M, SECAM B/G, D/K, L Standards
• Direct acces keys for nine different chars
• 4:3 & 16:9 formats
• Addition of an electronic circle
• Double side band modulation

PORGRAMMABLE CALIBRATED OPTICAL FIBER VARIABLE ATTENUATOR 60 DB FTTH PROMAX PROLITE-360

• Access all data from a single screen
• Up to 10 programmable attenuation sequences
• Low insertion loss (< 2 dB)
• Calibrated for standard FTTH networks wavelengths
• Attenuation is indicated in both absolute and relative modes
• USB to PC connection

CATV/ SMATV COAXIAL CABLE TEST SIGNAL GENERATOR 5..2150 MHZ PROMAX RP-110

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.

TRANSMODULATOR DVB-S/S2 -> DVB-T PROMAX DT-232

• DVB-S/S2 FI INPUT: 2 independent DVB-S/S2 IF inputs
• RF OUTPUT: 2 independent combined DVB-T multiplexes
• interface for Conditional Access Module (CAM)
• PID Filtering Table up to 32 PID

PROMAX OP-040B OPTICAL FIBER SPLICING KIT

• - Kevlar scissors
• - Fibre disposal unit
• - Isopropyl alcohol cleaning wipes (x50)
• - Connector cleaner
• - SC/APC pre-polished connectors
• - Mechanical splicer
• - Mini Visual Laser Source
• - LED headlamp
• - Transport and storage suitcase

DISTRIBUTION TRANSMODULATING HEADEND SATELLITE DVB-S -> DIGITAL TERESTRIAL DVB-T PROMAX DTTV

• DVB-T (DTT) output
• converts analogue/ digital video source to DVB-T with a max 200 programmes in the UHF band
• transmodulate Satellite TV channels to Digital Terrestrial Television multiplexes
• system allows to re-organise the spectrum, adding the off-air DTT channels received in the region
• encoding video-audio channels
• remotely controlled through Ethernet

PROMAX RANGER MINI

• Aiming terrestrial antennas and satellite dishes
• analyzing DOCSIS and installing optical fibre
• The cost effective all-in-one compact analyzer for RF, CATV and optical fibre