Digital Satellite Receiver DVB-S/S2 -> ASI-Transport Stream Promax DT-302

Code: Promax DT-302


 

Datasheet PDF, 0.18 Mb

Description

The DT-302 (dual) modules are digital satellite receivers compatible with DVB-S and DVB-S2 standards. They can receive a satellite transponder and deliver the transport stream in the form of TS-ASI.

Each satellite receiver has two identical TS-ASI outputs. This is because satellite transponders can typically allocate a higher number of services than DVB-T mutiplexes and therefore more than one COFDM modulator may be required if we want to deliver all services of the transponder to the TV distribution system.

Each satellite receiver allows inserting a Conditional Access Module (CAM). Several types of CAM can be used for de-encrypting one or more of the available encrypted programmes and being distributed (see DT-902).

 

 

DVB-S/S2 IF INPUT
  Connector

2 independent DVB-S/S2 inputs
F-Type female, Impedance 75 ?

TS OUTPUT
  Connector

2 double independent DVB-ASI outputs
BNC female, Impedance 75 ?

TS PROCESSING

Simultaneous decryption of multiples services

 (using a proper CAM module, see DT-902).
Selection of decrypted services by name

CONFIGURATION AND
POWER SUPPLY

Through the DT-800 Control Module. Control

can be made remotely from a PC

 

Recommended options

DT-800B

Control unit and power supply.

DT-802

Control unit and redundant power supply modules.

DT-900

Rack and wall mounted structure.

DT-900B

Rack mounted structure.

DT-901

Empty module plates..

DT-902B

Power CAM modules for smart cards..

CC-043

Supply and control cable with 3 connexions for DT-800B (included)

CC-044

Supply and control cable with 4 connexions for DT-800B (included)

CC-143

Supply and control cable with 3 connexions for DT-802 (included)

CC-144

Supply and control cable with 4 connexions for DT-802 (included)

OP-XXX-V

Output in the range 170-650 MHz for modules with DVB-T..

OP-800-P

Option required to use DT-800B with 3 x DT-730 modules

OP-212-D

Dual independent output for DT-212B

OP-504-S

TS-ASI output option for DT-504B

 

 

 

RECEIVERS WITH ASI-TS OUTPUT

DT-302

Dual DVB-S/S2 receiver with CAM, ASI-TS output.

DT-312

Dual DVB-T receiver, ASI-TS output.

DT-324-M

IP receiver to ASI-TS output (MPTS).

DT-324-S

IP receiver to ASI-TS output (SPTS).

 

 

 

IP STREAMERS

DT-421-M

IP Streamer. ASI-TS inputs, IP output (MPTS)

DT-421-S

IP Streamer. ASI-TS inputs, IP output (SPTS)

 

 

 

COMBINERS - AMPLIFIERS

DT-700

4x1 quadruple DVB-T combiner .

DT-710

8 input DVB-T combiner with a 117 dBuV (+10 dBm) one

 single output.

DT-722

4 input DVB-T combiner with a 129 dBuV / 250 mW (+22 dBm)

 one single output.

DT-730

DVB-T amplifier with a 137 dBuV / 1 W (+30 dBm).

DT-610

Optical transmitter module

DT-620

Optical receiver module

 

More products PROMAX

DVD & CD TRAINING SYSTEM PROMAX ED-845

• theoretical-practical study of a DVD & CD player
• observe the internal composition of the mechanics
• analyze the signals that take part of the operation
• simulate several faults for the study of troubleshooting and diagnostic methods

 

HOME DIGITAL VIDEO MODULATOR DVB-T PROMAX EN-106

• sends audio / video signal from TV satellite receivers, closed-circuit television cameras (CCTV) or video players to DVB-T
• Video Input: 1 x PAL?/?NTSC / SECAM
• Audio Input: 2 x Mono /?Stereo
• Video Compression: MPEG-2 MP@ML 720x576, 25 fps (PAL), 720x480, 30 fps (NTSC)
• Audio Compression: MPEG-1 Layer II Stereo, Mono, Dual, Joint Stereo
• FREQUENCY MARGIN: From 100 to 865 MHz (channels S01 to C69)

 

EDUCATIONAL TRAINING SYSTEM FOR DIGITAL COMMUNICATIONS PROMAX EC-796

• MODULATIONS: ASK, FSK, BPSK, QAM, QPSK, DQPSK
• INPUTS: Generator, microphone/oscilloscope, headphone
• TRANSMISSION: Two-wire, coaxial, Fibre optics, Infra Red, Radio

 

PROMAX RANGER MINI

• Aiming terrestrial antennas and satellite dishes
• analyzing DOCSIS and installing optical fibre
• The cost effective all-in-one compact analyzer for RF, CATV and optical fibre

 

WI-FI WIRELESS NETWORK ANALYZER FOR 802.11B/ 802.11G PROMAX PROFI-70

• Wi-Fi Wireless Fidelity networks that fulfills the IEEE standard 802.11b and 802.11g
• practical, accurate, yet easy-to-use device
• simple alphanumeric keypad including soft-keys facilitates direct access to operating modes
• RS-232 interface for connection to a printer or computer
• DATALOGGER FUNCTION MEASUREMENTS: Channel, SSID, MAC, Power and Signal/Noise ratio

 

ENCODER & TRANSCODER H.264/AVC MPEG-4 HD-SDI HDMI YPBPR RGB CVBS PROMAX EN-264

• H.264/AVC (MPEG-4 part 10), High profile, Level 4.0, 4:2:0 Chrominance sampling
• TS to TS Transcoding (MPEG-2 HD to H.264 HD/SD or MPEG-2 SD to H.264 SD)
• MPEG-1 Audio Layer1 & Layer2 encoding
• 1x Dolby Digital (AC-3) or 1x MPEG-1 audio pass through transcoding
• Supports full HD 1080i encoding
• HD-SDI, HDMI, YPbPr/RGB video input interface

 

PC PERSONAL COMPUTER TRAINING SYSTEM PROMAX EO-865

• assembly, installation and configuration of all the components composing a multimedia PC
• composed of widely spread and high reliability hardware components
• multiple test points enable the main electrical signals
• establish failure diagnostic and repairing methods

 

FTTH ANALYZER & OPTICAL FIBER SELECTIVE PON POWER METER GPON PROMAX PROLITE-67

• measuring simultaneously three wavelengths (1310, 1490 and 1550 nm) in FTTH / PON systems
• optimized for GPON architecture
• Visible Fault Locator by laser emission
• Data transfer to PC
• Graphical interface simple and very intuitive, easy-to-use

 

SFN/MFN MODULATOR ASI-TS MPEG -> DTMB PROMAX MO-280

• fully compliant with the GB20600-2006 and the GY/T 229. 1-2008 standards
• 10 MHz GPS reference input
• MPEG-2 TS INPUTS: 2xSerial ASI-TS MPEG-2 inputs
• RF Output: 45 to 875 MHz (1 Hz steps). MER > 38 dB

 

MULTI-CARRIER CATV CABLE VIDEO SIGNAL GENERATOR 4 CHANNELS 5..900 MHZ PROMAX RP-200

• 4 channels handheld pilot generator 5..900 MHz Frequency Range
• direct frequency band (downstream) and return band (upstream) in CATV
• fully-configurable by the user
• frequency and level of each pilot can be set independently
• powered by rechargeable batteries