Radio & Digital TV Monitoring, Detection, Measurement System PROWATCH Deide3

Code: Promax PROWATCH Deide3


 

Datasheet PDF, 0.28 Mb

Description

PROMAX is presenting the new PROWATCH DEIDE3 equipment, based on technology developed on our R+D labs. PROWATCH DEIDE3 equipment, are detection, identification and continuous monitoring systems for radio and digital TV signals with remote control.

  • Detection of radio signals received in a specific location, in the radio as well as in the digital and analogue television bands.
  • Identification of each one of the signals received, obtaining the information provided by the radio broadcaster either in the signal itself or for visual and/or sound identification.
  • Permanent monitoring of a variable area of the radio spectrum, carrying out an analysis of the detected variations.
  • The equipment or measuring station can carry out the previous operations in local mode or through remote control by other analogue equipment.
  • It works with digital radio (DAB), terrestrial digital television (TDT) according to the DVB-T (COFDM modulation) standard, FM-RDS radio and analogue TV signals.
 

Recommended options

 

 

More products PROMAX

OPTICAL FIBER POWER METER PROMAX PROLITE-23

• 850, 1300, 1310, 1490, 1550 nm CALIBRATED WAVELENGTH
• Pocketsize, large LCD display, easy to use
• Measure six wavelengths through a single connector
• Direct loss measurements units in dB
• Absolute power measurement units in dBm and W (or µW)
• PC software available for testing data collection and report generation

 

PROMAX PROLITE-40B OPTICAL FIBER FUSION SPLICER

• Automatic fusion splicing on 3 axis (X,Y, Z)
• Maximum accuracy
• Fibre aligning by means of core aligning method
• Single or simultaneous axis view.
• Fibre core can be display clearly.
• 5.7" colour LCD display.
• Temperature and atmospheric pressure indicators.
• Auto check quality of cleaved end face.

 

OPTICAL FIBER TESTING LIGHT LASER SOURCE PROMAX PROLITE-105

• meet any requeriment of fibre optics for FTTHx networks
• wavelengths 1310, 1490 and 1550 nm
• Low-frequency modulation selectable for each wavelength
• Sequential mode for automatic measurements

 

IP RECEIVER -> 4 X DVB-ASI TRANSPORT STREAM PROMAX DT-324

• IP INPUT: Ethernet 100/1000 Mbps. RJ45 connector
• TS OUTPUT: 4 x DVB-ASI. BNC Female connector, 75 ?
• Communication protocol: UDP or RTP/UDP communication protocol
• Transmision methode: MULTICAST / IGMP Version 2
• Payload: From 1 to 7 packets MPEG-2

 

CATV/ SMATV COAXIAL CABLE TEST SIGNAL GENERATOR 5..2150 MHZ PROMAX RP-110

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.

 

TRAINING SYSTEM FOR ANTENNA TRANSMISSIONS PROMAX EA-817B

• install, configure, adjust, modify and analyse any kind of actual MATV and SMATV installation
• high definition (HD) terrestrial television receiver and satellite television receiver is provided
• high definition and video compression (MPEG-2 and MPEG-4)
• DVB-S2, transmodulation, TDT Premium, IPTV, Fiber Optics, FTTx
• DTT signals propagation, Gap-Fillers, transport stream (TS) creation
• familiarity with PID, PMT NID
• configuration and testing of modulation parameters

 

ENCODER & TRANSCODER H.264/AVC MPEG-4 HD-SDI HDMI YPBPR RGB CVBS PROMAX EN-264

• H.264/AVC (MPEG-4 part 10), High profile, Level 4.0, 4:2:0 Chrominance sampling
• TS to TS Transcoding (MPEG-2 HD to H.264 HD/SD or MPEG-2 SD to H.264 SD)
• MPEG-1 Audio Layer1 & Layer2 encoding
• 1x Dolby Digital (AC-3) or 1x MPEG-1 audio pass through transcoding
• Supports full HD 1080i encoding
• HD-SDI, HDMI, YPbPr/RGB video input interface

 

COFDM MODULATOR OF DUAL TRANSPORT STREAM-ASI -> DVB-T MULTIPLEX PROMAX DT-102

• TS INPUT: 2 DVB-ASI independent inputs
• RF OUTPUT: 2 independent combined DVB-T multiplex
• Filtering table up to 32 PID
• Measurement: Bitrate of the output multiplex
• includes an internal combiner that delivers a single DVB-T output with high C/N

 

PROMAX RANGERNEO 3 TV 4K AND SPECTRUM ANALYZER

• Professional signal analyzer designed for expert installers and broadcast engineers
• Includes Network Delay Margin, T2-MI analysis, GPS (drive test), DAB/DAB+ digital radio plus all the RANGER Neo 2 functions.

 

COFDM MODULATOR DVB-ASI/ SPI -> DVB-T PROMAX MO-160/161

• MPEG-2 TS INPUT: 2x DVB-ASI, 1x DVB-SPI
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 475-875 MHz (45-875 MHz for MO-161 model)
• CONSTELLATIONS: QPSK, 16QAM, 64QAM