The DT-324 is a IP packet converter to ASI-TS. It extracts information from an Ethernet network and processes and delivers it up to 4 TS-ASI outputs.

The 100/1000 Mbps input must be connected to an IP network carrying MPEG-2 transport stream packets. The module extracts the IP streams from four Transport Streams corresponding to four DVB-ASI outputs available.

It is configured and controlled by means of the control module DT-800.

IP INPUT	Ethernet 100/1000 Mbps. RJ45 connector.
TS OUTPUT	4 x DVB-ASI. BNC Female connector, 75 ?
IP STREAMS Communication protocol Transmision methode Payload	UDP or RTP/UDP communication protocol. MULTICAST / IGMP Version 2. From 1 to 7 packets MPEG-2.
CONFIGURATION AND POWER SUPPLY	Through the DT-800 Control Module in local (keypad) or remote mode (PC)

Recommended options

DT-324-M	IP receiver to ASI-TS output (MPTS).
DT-324-S	IP receiver to ASI-TS output (SPTS).

DT-800B	Control unit and power supply.
DT-802	Control unit and redundant power supply modules.
DT-900	Rack and wall mounted structure.
DT-900B	Rack mounted structure.
DT-901	Empty module plates..
DT-902B	Power CAM modules for smart cards..
CC-043	Supply and control cable with 3 connexions for DT-800B (included)
CC-044	Supply and control cable with 4 connexions for DT-800B (included)
CC-143	Supply and control cable with 3 connexions for DT-802 (included)
CC-144	Supply and control cable with 4 connexions for DT-802 (included)
OP-XXX-V	Output in the range 170-650 MHz for modules with DVB-T..
OP-800-P	Option required to use DT-800B with 3 x DT-730 modules
OP-212-D	Dual independent output for DT-212B
OP-504-S	TS-ASI output option for DT-504B

	RECEIVERS WITH ASI-TS OUTPUT
DT-302	Dual DVB-S/S2 receiver with CAM, ASI-TS output.
DT-312	Dual DVB-T receiver, ASI-TS output.
DT-324-M	IP receiver to ASI-TS output (MPTS).
DT-324-S	IP receiver to ASI-TS output (SPTS).

	IP STREAMERS
DT-421-M	IP Streamer. ASI-TS inputs, IP output (MPTS)
DT-421-S	IP Streamer. ASI-TS inputs, IP output (SPTS)

	COMBINERS - AMPLIFIERS
DT-700	4x1 quadruple DVB-T combiner .
DT-710	8 input DVB-T combiner with a 117 dBuV (+10 dBm) one single output.
DT-722	4 input DVB-T combiner with a 129 dBuV / 250 mW (+22 dBm) one single output.
DT-730	DVB-T amplifier with a 137 dBuV / 1 W (+30 dBm).
DT-610	Optical transmitter module
DT-620	Optical receiver module

More products PROMAX

RF POWER DVB-T AMPLIFIER COFDM SIGNAL 1W 30DBM PROMAX DT-730

• FREQUENCY BANDS: UHF from 470 MHz ~ 862 MHz
• 1 W RF power amplifier for COFDM signals
• both for single carrier or multicarrier system
• provides an amplified output of 30 dBm (137 dBµV)
• preserves the original signal quality and maintains a low noise levels

PROMAX RANGERNEO 2 TV AND SPECTRUM ANALYZER

• DVB-T, DVB-T2, DVB-T2 lite
• DVB-C, DVB-C2
• DVB-S, DVB-S2, DVB-S2 multistream
• ISDB-T/Tb
• DSS, ACM/VCM/CCM
• MPEG-TS

PROMAX ATLAS-IP MULTICAST AND UNICAST IPTV ANALYZER WITH SRT PROTOCOL SUPPORT

• ATLAS IP is a multicast and unicast IPTV analyzer, with SRT protocol support and optionally ST 2110
• It includes SD-SDI, HD-SDI, and 3G-SDI over RF (and, on demand, over optical fiber).

CATV/ SMATV COAXIAL CABLE TEST SIGNAL GENERATOR 5..2150 MHZ PROMAX RP-110

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.

COFDM MODULATOR DVB-ASI/ SPI -> DVB-T/ DVB-H PROMAX MO-170

• MPEG-2 TS INPUTS: 2x DVB-ASI, 1x DVB-SPI
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 45-875 MHz
• CONSTELLATIONS: QPSK, 16QAM, 64QAM

DVB-T COMBINER & 22 DBM RF SIGNAL AMPLIFIER PROMAX TD-522

• designed to combine different RF (COFDM) signals in DVB-T format
• provides 46 dBm amplification and an output power of 130 dBµV (+22 dBm)
• to be assembled in a rack cabinet of 19 inches and 1U height
• FREQUENCY RANGE: 50 MHz to 860 MHz

COMBINER 4 X DVB-T -> 1 X DVB-T PROMAX DT-722

• FREQUENCY MARGIN: From 50 MHz (C-2) to 860 MHz (C-69)
• INPUTS: 4 inputs Female BNC, 75 ? impedance
• RF OUTPUT: 1 female BNC output, 75 ? impedance
• output designed to mix output RF signals of COFDM modulators and transmodulators with DTT channels

MULTI-CARRIER RETURN PATH CATV CABLE SIGNAL VIDEO GENERATOR 5..100 MHZ PROMAX RP-100/ RP-100Q

• RP-100: 2 generated carrier pilots
• RP-100Q: 2 generated carrier pilots
• 5 MHz to 100 MHz Frequency Range
• 90 to 110 dBµV (30-50 dBmV) adjustable in steps of 1 dB output level
• select independent frequencies for each pilot
• internal rechargeable battery

COMBINER 16 X DVB-T -> 4 X DVB-T PROMAX DT-700

• INPUTS FOR EACH COMBINER: 4 BNC female inputs 75 ? (16 total)
• OUTPUTS FOR EACH COMBINER: 1 BNC female output 75 ? (4 total)
• allows many different combinations to adapt to the needs of each system as best as possible
• used to mix the output RF signals of the COFDM modulators and transmodulators
• preserves better the original quality and maintains lower noise levels

ANALOGUE & DIGITAL TELEPHONY TRAINING SYSTEM PROMAX ET-836

• Last generation of telephone station ISDN / analogue
• 2 internal analogue lines
• 4 external analogue lines
• 4 external basic access So (B+B+D)
• Programming and configuration of the telephone station through PC
• Simulation of an urban analogue station and the circuits of tarification