The Multistandard and Multisystem Generator of analogue and digital television signals GV-998 with MPEG-2 format TS output, is able to generate the necessary signals to verify the most common anomalies that can occur in Digital TV receivers. The system has an analogue external input of audio and video.

Multi-standard and multi-system analogue TV signals
Test Signal generation in MPEG-2, SPI or ASI format
The Test Signal contains valid audio and video programs
External analogue and digital audio / video inputs
Moving MPEG-2 video pattern generation
MPEG logos
RS-232 remote operation

TS GENERATION	MPEG-2 format, audio/video valid program
SOUND	Variable frequency for TV decoder verification
ANALOGUE TV	Multistandard and multisystem signal generation

Recommended options

More products PROMAX

TRAINING SYSTEM DIGITAL TV RECEIVER PROMAX EU-850

• digital television receivers (satellite, terrestrial and cable)
• transmission, reception and distribution of the digital television (COFDM, QPSK and QAM)
• 5"-TFT hi-res graphical display
• Terrestrial (PAL, SECAM and NTSC systems)
• Terrestrial (COFDM), Satellite (QPSK) and Cable (QAM)
• Video: MPEG-2 / DVB (MP@ML) format

DVB-T COMBINER & 22 DBM RF SIGNAL AMPLIFIER PROMAX TD-522

• designed to combine different RF (COFDM) signals in DVB-T format
• provides 46 dBm amplification and an output power of 130 dBµV (+22 dBm)
• to be assembled in a rack cabinet of 19 inches and 1U height
• FREQUENCY RANGE: 50 MHz to 860 MHz

MPEG-2 TRANSPORT STREAM RECORDER, PROCESSOR, PLAYER PROMAX TG-130

• integrated DVB-T tuner that allows the TS capture in real time
• record a transport stream continuously for several minutes and then play it back
• work in the field where maybe it is not possible to find electricity available
• ASI Transport Stream Input: Maximum data rate 40 Mb/s
• RF Input: DVB-T from 35 to 100 dBµV
• ASI & SPI parallel Transport Stream Output: Maximum data rate 32 Mb/s
• Storing Capacity: Memory card 4 GB, 20 minutes approx (20 Mbits/s)

CASSETTE RECORDER TRAINING SYSTEM PROMAX EG-833

• Input section
• Recording process section
• Playback process section
• Output section
• Noise reduction systems: Dolby© B and C
• Control system

MULTI-CARRIER CATV CABLE VIDEO SIGNAL GENERATOR 4 CHANNELS 5..900 MHZ PROMAX RP-200

• 4 channels handheld pilot generator 5..900 MHz Frequency Range
• direct frequency band (downstream) and return band (upstream) in CATV
• fully-configurable by the user
• frequency and level of each pilot can be set independently
• powered by rechargeable batteries

ANALOGUE TV VIDEO SIGNAL PATTERN GENERATOR PAL/ NTSC/ SECAM PROMAX GV-898+/ GV-798+

• PAL / PAL60 / SECAM / NTSC Multistandard
• GV-898+ : Vestigial Side Band Modulation - VSB
• GV-798+ : Double Side Band Modulation - DSB
• YPbPr outputs
• 4:3, 16:9 & 14:9 formats (WWS signals)
• NICAM / Zweiton sound
• RS-232 remote operation

TRANSMODULATOR DVB-S/S2 -> DVB-T PROMAX DT-232

• DVB-S/S2 FI INPUT: 2 independent DVB-S/S2 IF inputs
• RF OUTPUT: 2 independent combined DVB-T multiplexes
• interface for Conditional Access Module (CAM)
• PID Filtering Table up to 32 PID

TDS-OFDM MODULATOR ASI/ SPI -> DTMB PROMAX MO-270

• compliant with China's national standard specification for digital terrestrial broadcasting GB20600-2006
• MPEG-2 TS INPUTS: 2x ASI, 1xSPI
• IF OUTPUT: 36 MHz, 50 ? BNC female connector
• RF OUTPUT: 45-875 MHz, 50 &8486; BNC female connector
• MODULATION: TDS-OFDM, 1 or 3780 subcarriers

RADIO FREQUENCY PILOT SIGNAL GENERATOR IF/UHF SATELLITE SIMULATOR PROMAX RP-050

• test the frequency response of an entire television system prior to having the antennas or the Headend installed
• can be used for the test and certification of TV and satellite wiring, headend trouble shooting
• 1050 / 1575 / 2100 MHz L BAND TEST PILOTS
• 537.5 MHz UHF TEST PILOT

TRANSMODULATOR DVB-T -> DVB-T PROMAX DT-212

• RF INPUTS: 2 independent DVB-T inputs
• RF OUTPUT: 2 combined independent DVB-T multiplexes
• PID Filtering with Filtering Table up to 32 PID
• direct COFDM input that can be tuned to any multiplex
• ouput in the UHF band
• regenerate the quality of the multiplex when received from a noisy source
• change the input channel to another channel with total quality preservation