20 Hz to 3.6, 8.4, 13.6, or 26.5 GHz
10 MHz (standard), 25 or 40 MHz (optional) analysis bandwidth
Basic EMI precompliance measurement capability available, including CISPR 16-1-1 bandwidths, detectors, amplitude correction factor, band preset, tune & listen at marker, and limit lines
internal preamplifier options up to 26.5 GHz
±0.23 dB absolute amplitude accuracy
+20 dBm third order intercept (TOI)
-166 dBm displayed average noise level (DANL) with preamplifier
-78 dB W-CDMA ACLR dynamic range (with noise correction on)
Supports over 25 measurement applications, covering cellular communication, wireless connectivity, digital video and general purpose
Advanced analysis of more than 70 signal formats, software runs inside the MXA
MATLAB® data analysis software for general purpose data analysis, visualization, and measurement automation
LXI class C compliant, SCPI and IVI-COM
USB 2.0, 1000Base-T LAN, GPIB
Common X-Series user interface / Open Windows® XP operating system

Recommended options

Option 503 20 Hz to 3.6 GHz
Option 508 20 Hz to 8.4 GHz
Option 513 20 Hz to 13.6 GHz
Option 526 20 Hz to 26.5 GHz

More products KEYSIGHT

AGILENT N9000A CXA SIGNAL SPECTRUM ANALYZER 9 KHZ..3 GHZ OR 7.5 GHZ

• 9 kHz to 3.0 or 7.5 GHz Frequency range
• 10 MHz (standard), 25 MHz (optional) analysis bandwidth
• Basic EMI precompliance measurement capability available
• Standards-based PowerSuite: channel power, OBW, ACP, CCDF, SEM

AGILENT E4438C ESG VECTOR SIGNAL GENERATOR 250 KHZ..1 GHZ/ 2 GHZ/ 3 GHZ/ 4 GHZ/ 6 GHZ

• 250 kHz to 1 GHz, 2 GHz, 3 GHz, 4 GHz or 6 GHz
• 0.01 Hz resolution
• +17 dBm output power
• 64 MSa playback memory and 1 GSa storage
• 80 MHz dual mode internal baseband generator: arbitrary waveform and real-time I/Q

USB MODULAR DATA ACQUISITION UNIT 64-CHANNELS 250KSA/S AGILENT U2355A

• High-speed USB 2.0
• 16-bit resolution
• 64 SE/32 DI multiplex analog input channels
• Up to 250 kSa/s sampling rate
• 2 12-bit analog output channels,
• 1 MSa/s analog output update rate
• 24-bit programmable TTL input/output channels

AGILENT 6811B AC POWER SOURCE & ANALYZER 375VA

• Power: 375 VA
• Voltage rms: 300 V
• Current rms: 3.25 A
• Repetitive & non-repetitive peak current: 40 A

MULTIPLEXER MODULE 20 CHANNELS AGILENT 34901A

• 20 Channel Multiplexer
• Two- and four-wire scanning
• 300 V switching
• 60 ch/s scanning
• Built-in thermocouple reference junction

USB MODULAR DIGITAL I/O 64-CH. INPUT AGILENT U2652A

• Hi-Speed USB 2.0 (480 Mbps)
• 64 Input opto-isolated lines
• Functions as standalone or modular unit
• Up to 1250 Vrms isolation protection

USB DATA ACQUISITION MAINFRAME CHASIS 3-SLOT AGILENT U2781A

• High-speed USB 2.0 (480 Mbit/s)
• Allows expansion up to 384 channels
• Hot-swappable and auto-detectable characteristic
• Internal and external 10 MHz reference clock

PXI RF MATRIX SWITCH 3GHZ 1 X 16, 50 OHM AGILENT M9149A

• RF switching to 3 GHz
• 1x16 50 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 40 dB isolation at 1 GHz
• 1.3 dB insertion loss at 3 GHz

USB MODULAR DATA ACQUISITION UNIT 16-CHANNELS 500KSA/S AGILENT U2353A

• High-speed USB 2.0
• 16-bit resolution
• 16 SE/8 DI multiplex analog input channels
• Up to 500 kSa/s sampling rate
• 2 16-bit analog output channels
• 1 MSa/s analog output update rate
• 24-bit programmable TTL input/output channels

AGILENT N3300A N3301A N3302A N3303A N3304A N3305A N3306A N3307ADC ELECTRONIC LOADS

• 6 Slots - Full Rack Width Mainframe(N3300A Mainframe)
• 1800 Watts of Total Maximum Power(N3300A Mainframe)
• 2 Slots - Half Rack Width Mainframe(N3301A Mainframe)
• 600 Watts of Total Maximum Power(N3301A Mainframe)
•
• 6 Modules available for configuring (150W to 600W)
• Max Voltage Input: 240V (N3303A)
• Max Current Input: 120A (N3306A)