Agilent 81101A Pulse Generator 50 MHz

Code: Agilent 81101A


 

Datasheet PDF, 0.17 Mb

Description

  • 1 mHz to 50 MHz
  • 1 Channel
  • 5 ns to 200 ms variable transition time
  • Up to 10 Vpp into 50 O (20 Vpp into open circuit)
  • Preset TTL/ECL levels
  • Glitch-free timing changes
  • Triggerable or internal PLL
  • Single ended outputs
  • Graphical Display
  • Store/Recall Settings
  • Fully SCPI programmable
  • BNC outputs, single-ended
  • GPIB and RS-232
 

More products KEYSIGHT

DIGITAL OSCILLOSCOPE 4 X 70 MHZ & LOGIC ANALYZER 8 CHANNELS AGILENT MSOX2004A

• 70 MHz bandwidth
• 4 analog channels plus 8 digital channels
• 1GSa/s per channel sample rate

 

AGILENT 33220A ARBITRARY WAVEFORM GENERATOR 20 MHZ

• 20 MHz Sine and Square waveforms
• 14-bit, 50 MSa/s, 64 K-point Arbitrary waveforms
• 5 MHz pulse waveforms with variable rise/fall times
• Pulse, Ramp, Triangle, Noise, and DC waveforms

 

AGILENT N9010A EXA RF SPECTRUM ANALYZER 9 KHZ..3.6 / 7 / 13.6 / 26.5 GHZ

• 9 kHz to 3.6 GHz, 7.0 GHz, 13.6 GHz or 26.5 GHz
• 10 MHz (standard), 25 or 40 MHz (optional) analysis bandwidth
• Basic EMI precompliance measurement capability available
• Advanced analysis of more than 70 signal formats

 

PXI SWITCH SPDT MODULE 26-CHANNELS 2A AGILENT M9130A

• General purpose switching to control external devices or
• switch in loads or power supplies
• 26-channel SPDT switch
• 2A switch/carry current
• 60W max power
• Durable, armature relays

 

FET MULTIPLEXER MODULE 40/80 OPTICALLY ISOLATED CHANNELS AGILENT 34925A

• 40 2-wire channels or 80 1-wire channels
• Mixed 2- or 4-wire configurations
• High-speed optically isolated FET switches, with relay counter

 

AGILENT 6631B 6632B 6633B 6634B DC HIGH PERFORMANCE POWER SUPPLY 80-100W

• Fast, low-noise, Single outputs
• Linear output regulation
• Dual-range, precision low current measurement
• High-speed programming, 2 ms (400 µs in fast mode)
• GPIB (SCPI) & RS-232

 

PXI RF MATRIX SWITCH 3GHZ QUAD 1 X 4, 75 OHM AGILENT M9151A

• RF signal routing to 3 GHz for 75 ohm applications
• Quad 1x4 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 43 dB isolation at 1 GHz

 

AGILENT 1604B HAND HELD DIGITAL OSCILLOSCOPE 2 X 40 MHZ

• 40 MHz bandwidth
• 2 analog channels
• 200MS/s sample rate
• 6000 count Digital Multimeter
• 125KS Maximum recording length viewable on screen with zoom function

 

AGILENT 6690A 6691A 6692A DC HIGH POWER SUPPLY 6600W

• Fast, low-noise Single outputs
• Linear output regulation
• Overvoltage & overcurrent protection
• Measured V & I readback over GPIB

 

PXI MICROWAVE SWITCH MODULE DC-26.5GHZ AGILENT M9155C

• Hybrid Dual SPDT Coaxial Switch Unterminated
• Broadband from DC to 26.5 GHz
• Unmatched isolation 92 dB at 8 GHz
• Long life cycles - 5 million cycles guaranteed, 10 million cycles typical