Agilent 4263B LCR Meter 100 Hz..100 kHz

Code: Agilent 4263B


 

Datasheet PDF, 0.51 Mb

Description

  • 0.1% basic accuracy
  • 100 Hz, 120 Hz, 1 kHz, 10 kHz, 20 kHz, 100 kHz test frequencies
  • Measurement parameters: Z, Y, Theta, R, X, G, B, C, L, D, Q, Rdc, N, M
  • 20 mVrms to 1 Vrms in 5 mV steps
  • High-speed measurement: 25 ms
  • High-speed contact check
  • Test signal level monitor function
  • Wide capacitance test range
  • GPIB and handler interfaces
  • Transformer turns-ratio, mutual inductance and dc-resistance measurements with opt. 001 (now included at no extra charge)
 

Recommended options

16034E

Test Fixture (SMD Components)

16034G

SMD Test Fixture  

16034H

SMD Array Type LCR Test Fixture  

16044A

SMD LCR Kelvin Contact Test Fixture  

16047A

Test Fixture (Axial and Radial)  

16047D

Test Fixture  

16047E

Test Fixture, 40 Hz to 110 MHz  

16048A

Test Lead, BNC Connector to BNC Connector Board  

16048D

2m BNC Test Cable  

16048E

Test Leads  

16060A

Transformer Test Fixture  

16065A

200 Vdc External Voltage Bias Fixture  

16065C

40Vdc External Voltage Bias Adapter  

16085B

Terminal Adapter  

16089A

Large Kelvin Clip Lead  

16089B

Medium Kelvin Clip Lead  

16089C

Kelvin IC Clip Lead  

16089D

Alligator Clip Lead (4 Clips)  

16089E

Kelvin Clip Leads  

16092A

Spring Clip Fixture  

16192A

Parallel Electrode SMD Test Fixture  

16194A

High Temperature Component Test Fixture

 

More products KEYSIGHT

MULTIFUNCTION MODULE I/O AGILENT 34907A

• 16 bits of digital input and output
• 100 kHz totalizer input
• Two +/-12V analog outputs

 

DATA ACQUISITION SOFTWARE AGILENT 34832 BENCHLINK DATA LOGGER PRO

• Quick test setup and execution
• Create multiple scan lists
• Execute different events based on predefined limits
• Use advanced math formulas
• Collect, monitor and manage data


USB MODULAR SWITCH MATRIX 4 X 8 AGILENT U2751A

• 32 Two-wire cross points in 4x8 configuration
• DB25 connector
• High-speed USB 2.0 (480MBits/s) TMC488.2 compatible
• Standalone and Modular capabilities

 

AGILENT 6690A 6691A 6692A DC HIGH POWER SUPPLY 6600W

• Fast, low-noise Single outputs
• Linear output regulation
• Overvoltage & overcurrent protection
• Measured V & I readback over GPIB

 

4 X 8 DUAL/QUAD MATRIX MODULE AGILENT 34933A

• Dual 4x8, 8x8, or 4x16 2-wire configurations
• 64 2-wire or 128 1-wire cross-points
• High-speed reed relays

 

AGILENT 6611C 6612C 6613C 6614C PROGRAMMABLE MULTIPLE POWER SUPPLY 25-160W

• Multiple sources in an integrated one-box solution
• Dual-range linear outputs
• 2, 3 or 4 independent isolated outputs
• Stable, low ripple and noise power source
• Measured V & I readback over GPIB

 

DIGITAL OSCILLOSCOPE 2 X 350 MHZ & LOGIC ANALYZER 16 CHANNELS AGILENT MSOX3032A

• 350 MHz bandwidth
• 2 analog channels plus 16 digital channels
• 2 GSa/s per channel sample rate, 4 GSa/s half-channel interleaved mode


DIGITAL OSCILLOSCOPE 4 X 100 MHZ AGILENT DSO7014B

• 100 MHz bandwidth
• 2 GSa/s sample rate
• 4 analog channels
• Standard 8 Mpts MegaZoom III deep memory

 

CURRENT CLAMP METER TRUE-RMS 1000A AGILENT U1211A

• 1000 A True-RMS AC current measurement
• Small body and large jaw size up to 52mm
• Includes full-featured DMM with resistance, capacitance, frequency, diode check, continuity

 

DIGITAL OSCILLOSCOPE 4 X 200 MHZ AND LOGIC ANALYZER 8 CHANNELS AGILENT MSOX2024A

• 200 MHz bandwidth
• 4 analog channels plus 8 digital channels
• 1GSa/s per channel sample rate