Brand: Hameg

Spectrum Analyzer 100kHz..1.6GHz Hameg HMS1000E

Code: Hameg HMS1000E


 

Datasheet PDF, 0.71 Mb

Description

  • Frequency Range 100kHz…1.6GHz
  • Amplitude Measurement Range -104…+20dBm
  • Sweep Time 20ms…1,000s
  • Resolution Bandwidth 10kHz…1MHz in 1-3 Steps, 200kHz (-3dB)
  • Spectral Purity <-100dBc/Hz (@100kHz)
  • Video Bandwidth 1kHz…1MHz in 1-3 Steps
  • Integrated AM and FM Demodulator (Phone and int. Speaker)
  • Detectors: Auto-, Min-, Max-Peak, Sample, RMS
  • 8 Markers with Delta Marker, miscellaneous Peak Functions
  • Crisp 16.5cm (6.5") TFT VGA Display
  • 3 x USB for Mass-Storage, Printer and Remote Control, optional IEEE-488 (GPIB) or Ethernet/USB Dual-Interface
 

Standard accessories

  • Line cord
  • Operating manual
  • HZ21 Adapter plug
  • N plug to BNC socket
  • CD
  • Software
 

Recommended options

  • HO730 Dual-Interface Ethernet/USB
  • HO740 Interface IEEE-488 (GPIB), galvanically isolated
  • HZ13 Interface cable (USB) 1.8 m
  • HZ14 Interface cable (serial) 1:1
  • HZ20 Adapter, BNC to 4 mm banana
  • HZ33 Test cable 50 O, BNC/BNC, 0.5 m
  • HZ34 Test cable 50 O, BNC/BNC, 1.0 m
  • HZ46 4RU 19" Rackmount Kit
  • HZ72 GPIB-Cable 2 m
  • HZ99 Carrying Case for protection and transport
  • HZ520 Plug-in Antenna with BNC connection
  • HZ525 50 O-Termination, N plug
  • HZ530 Near-Field Probe Set 1 GHz for EMI diagnostics
  • HZ540/550 Near-Field Probe Set 3 GHz for EMI diagnostics
  • HZ540L/550L Near-Field Probe Set 3 GHz for EMI diagnostics
  • HZ560 Transient limiter
  • HZ575 75/50 O Converter
  • HZO30 active probe 1 GHz (0.9 pF, 1 MO, including many accessories)
 

More products HAMEG

FUNCTION GENERATOR 10 MHZ HAMEG HM8030-6

• Frequency Range 50mHz…10MHz
• Output Voltage up to 10Vpp (into 50O)
• Waveforms: Sine Wave, Triangle, Square Wave, Pulse, DC

 

DC POWER SUPPLY MAINFRAME UNIT FOR HAMEG 8000 SERIES

• Basic Unit for Modules of the Modular System Series 8000
• Power Supply for 2 Modules
• DC Voltages electronically regulated, floating and short-circuit proof
• Power Transformer with thermal Fuse

 

DIGITAL OSCILLOSCOPE 2 X 100 MHZ HAMEG HMO1022

• 100 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

PRECISION PROGRAMMABLE LCR-BRIDGE 200 KHZ HAMEG HM8118

• Basic Accuracy 0.05 %
• Measurement Functions L, C, R, |Z|, X, |Y|, G, B, D, Q, T, ?, M, N
• Test Frequencies 20Hz…200kHz
• Up to 12 Measurements per Second
• Parallel and Series Mode

 

ARBITRARY FUNCTION GENERATOR 12.5 MHZ HAMEG HM8150

• Frequency Range 10mHz…12.5MHz
• Output Voltage 10mVpp…10Vpp (into 50O)
• Waveforms: Sine Wave, Square Wave, Triangle, Pulse, Sawtooth, Arbitrary
• Arbitrary Waveform Generator 40MSa/s

 

DIGITAL OSCILLOSCOPE 4 X 350 MHZ HAMEG HMO3524

• 350 MHz bandwidth
• 2 analog channels and MSO(Mixed Signal Opt.HO3508 [HO3516]) with 8 [16] Logic Channels
• 2 GSa/s sample rate on each channel, 4 GSa/s on half-channel

 

DIGITAL PROGRAMMABLE MULTIMETER 4.75 DIGIT HAMEG HM8012

• 4¾-Digit Display with 50,000 Counts
• Basic Accuracy 0.05%
• Max. Resolution: 10µV, 0.01dBm, 10nA, 10mO, 0.1°C
• RS-232 Interface and Software included

 

ARBITRARY WAVEFORM GENERATOR 50 MHZ HAMEG HMF2550

• Frequency Range 10µHz…50MHz
• Output Voltage 5mVpp…10Vpp (into 50O) DC Offset ±5mV…5V
• Arbitrary Waveform Generator: 250MSa/s, 14Bit, 256kPts
• Sine, Square, Pulse, Triangle, Ramp, Arbitrary Waveforms incl. Standard Curves (white Noise, Cardiac etc.)

 

PROGRAMMABLE PRECISION TRIPLE POWER SUPPLY HAMEG HMP4030

• 3 x 0…32V/0…10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

 

PRECISION TRIPLE POWER SUPPLY HAMEG HM7042-5

• 2 x 0…32V/0…2A 1 x 0…5.5V/0…5A
• High-Performance and inexpensive Laboratory Power Supply
• Floating, overload and short-circuit proof Outputs
• Display Resolution: 10mV/1mA at Channel 1+3; 10mV/10mA at Channel 2