Brand: FLUKE BIOMEDICAL

Rigid Endoscope Tester Fluke Biomedical DALE301

Code: Fluke Biomedical DALE301


 

Description

A simple-to-use, quick check for rigid endoscopes.

Finally, there is a simple tool for technical and non-technical personnel to perform a quick evaluation of most rigid endoscopes. With the DALE301, your staff diagnoses problems during incoming inspections, after complaints, pre- and post-service, and as a routine preventive-maintenance inspection.

With the DALE301, you can identify the following:

 

  • Broken lenses
  • Crooked rod shaft
  • Normal wear and tear
  • Internal moisture
  • Presence of contamination
  • Lens debris

 

Features

  • Incoming acceptance inspection performed
  • Simple to use
  • Lightweight and companct
  • No light source or other accessories required
  • Pre-repair inspections to prevent unneeded repairs and save money
  • Post-repair inspections to verify a performed service or indicate if a repair was simply a "dusting-off"
  • Compatible with most rigid endoscopes
  • Compatible with common cameras for hard copy documentation to trend test or to compare and decument service

 

 

Specifications

Outer Diameter of Eyepiece

 

 31.75 mm +0 -0.1 per DIN 58105

End-Cap Inner Diameter

 

 No less then 120 mm

Optical Design

Focal length:

 40 mm ± 3%

Refraction:

 25 dpt

Material:

 PMMA (Plexiglass)

Diameter:

 19 mm

Focal Point Adjustment Scale

 

 16 cm

Maximum Diameter of Rigid Endoscope

 

 <10 mm

Environmental

Operating Temperature:

 15 to 40 °C

Storage Temperature:

 -10 to +65 °C

Relative Humidity:

 95% max

Dimensions

 

 8.75" L x 1.75" W x 1.75" H

 

 (22 cm L x 4 cm W x 4 cm H)

Weight

 

 13.1 oz ( 370 g)

 

More products FLUKE BIOMEDICAL

INCUBATOR ANALYZER FLUKE BIOMEDICAL INCU

• Portability (sitting in place of infant within incubator)
• Single-instrument measurement and documentation for key infant-incubator parameters
• Measurement for most parameters according to IEC and AAMI standards
• Time-saving in testing critical infant incubators
• Windows® software for evaluation and documentation
• Numerical and graphical reports

 

HANDHELD ELECTRICAL SAFETY ANALYZER FLUKE BIOMEDICAL 175

• Handheld portability (fitting in a briefcase)
• Self-switching 120/240 V operation
• Patient-lead-leakage testing
• 15 A and 20 A capabilities
• Digital accuracy
• Dual-lead testing

 

DIGITAL ELECTRICAL SAFETY TESTER FLUKE BIOMEDICAL LT544

• Small, lightweight, self-contained portable instrument
• Universal Power Supply. Input voltage from 85 - 265 VAC
• Chassis Resistance measurements are made with a four-wire Kelvin bridge to eliminate errors due to cable length
• Test method complies with AAMI load per ANSI/AAMI ES1-1993


PRESSURIZED ION CHAMBER SURVEY METER FOR GAMMA, X-RAY RADIATION FLUKE BIOMEDICAL 451P

• High sensitivity µR measurements of rate and dose simultaneously, with the capability to record peak rate
• Ergonomic, anti-fatigue handle with replaceable grip, wrist strap and tripod mount
• Programmable flashing LCD display and audible alarm
• Easily-accessible battery door (operated by two 9-volt alkaline batteries) on the outside of the bottom case

 

AIR GAS FLOW ANALYZER FLUKE BIOMEDICAL VT PLUS HF

• Bi-directional flow, pressure, volume, and oxygen concentration, and pressure measurements
• Low- and high-pressure, and flow measurement capability
• Special HF mode-up to 900 BPM (15 Hz)
• RS-232 and printer ports
• Included Windows-compatible graphics software

 

GAS/ LIQUID PRESSURE TESTER OF MEDICAL EQUIPMENTS FLUKE BIOMEDICAL DPM2PLUS

• Handheld
• Battery operated
• 1 % accuracy
• Five selectable scale ranges
• Voltage output to drive a recorder for assessing electronics of pressure measurement circuit
• Air or liquid measurement


ELECTRICAL SAFETY ANALYZER FLUKE BIOMEDICAL 601 PRO

• EN60601-1, EN601010-1, and AAMI test loads (user selectable)
• Multiple enclosure-leakage points
• Multiple patient-applied-part types
• Power ON/OFF delay
• DC only for patient- and auxiliary-leakage tests
• User-programmable test sequences

 

ULTRASOUND ELECTRICAL SAFETY TRANSDUCER LEAKAGE CURRENT TESTER FLUKE BIOMEDICAL ULT800

• Handheld
• Stand-alone operation
• Direct measurement of leakage current
• Battery-operated
• Independent of 120 V or 240 V systems
• Built-in self-test circuit
• Auto shut-off to conserve battery

 

ELECTROSURGERY ANALYZER FLUKE BIOMEDICAL QA-ES

• Automatic power distribution measurement, including power, current, peak-to-peak voltage closed load only), and crest factor
• High-frequency leakage measurements with accuracy of ± 2 % of reading
• 128 internal user-selectable test loads from 10 O to 5200 O
• Ansur QA-ES software plug-in for automated test protocols
• RS-232 and Centronic-printer interface

 

ELECTRICAL SAFETY ANALYZER FOR MEDICAL ROOMS FLUKE BIOMEDICAL ESA612

• Portable, ergonomic, lightweight, and easy to use
• Large, easy-to-read display with adjustable contrast
• Human-factors-designed user interface
• Tilt stand design for stand-up testing in field environments
• Five applied parts jacks and easy ECG snap connection