The VibraGAS enables fast and accurate location of smallest leaks in the gas installation. In addition to the visual and audible signal it provides also a vibration alarm. Without worrying inhabitants the user is drawn to the smallest traces of gas. The vibration increases with the gas concentration. The display does not need to be observed for the location of the leak.

The flexible goose neck with remote sensor, offers the possibility for an exact examinationof pipe sections, fittings and valves. Escaping gas is detected and displayed in very small concentrations.

The use of VibraGAS offers numerous advantages over the use of leak spray. Hemp-sealed connections swellwhen using leak sprays often they are briefly"tight" again. On hard to reachline partssmallbubbles can beverydifficult to detect. Here, theuseof a mirrorfor detecting therearbubblesis often necessary.TheVibraGASworks"dirt-free" and leaves notracesof wallpaper, walls orfloor materials, such as leakspray. The following operating modes are selectable from the menu:

Building inspection detection of smallest leaks in plumbing lines and connections. In addition to the optical and acoustic signal a vibration alarm is available.

Settings Custom configuration of the operating parameters such as the measuring unit, automatic switch off or the duty cycle of the backlight to the user�s requirements.

Adjustment Sensor sensitivity test and calibration of the device according to DVGW Note G 465-4 by applying test gas and set point adjustment by pressing a button

Features:

Rugged hand-held instruments with ergonomic aluminum housing
Wide range of applications in the gas installation
Powerful gas detector with vibration alarm and digital display reading for gas leak detection
High contrast LCD display with backlight for an optimal presentation of all measured values
Easy replacement of batteries with innovative battery Management
Setting the zero point by pressing
No need to display observation for leak detection
Simple operation with intuitive menu navigation Practical accessories for all applications

More products ESDERS

ESDERS SINGLE GAS

• Operational life of two years
• Full factory warranty throughout the life of 24 months
• Measurement of H2S, CO and O2 ensures the safety of the worker
• Reduces training time
• Loud audible alarm, bright visual alarm, vibrating alarm

ESDERS HUNTER GAS LEAK DETECTOR AND ANALYZER

• Cast carpet mat free from the material wear common in deep drawn mats
• Stabilising mould elements enable optimal fit on the ground and enable the carpet to be pulled backwards
• Comprehensive flow channels for sampling

ESDERS VIBRAGAS EX

• Easy replacement of batteries with innovative battery Management
• Systematic evaluation of the measured data using Esders PC-1 software
• Graphical printout on site on mobile printer
• Simple operation with intuitive menu navigation
• Practical accessories for all applications

ESDERS VACUUM-PROBES-SYSTEM VSS 15

• Complete with connection cable and metal plug
• Stainless steel design with coarse filter and integrated water barrier
• Complete with connection cable and metal bush

ESDERS GASTEST DELTA3 GAS TESTER ACCORDING DVGW-TRGI 2008

• Usability test in accordance with G5952 or Esders express procedure
• Leak detection via external, digital hand sensor with integrated calibration and vibration alarm
• Automatic and manual test on controllers and safety valves
• Leak test with 150 mbar, strength test with 1 bar
• Pressure measurement up to 25 bar via external sensors

ESDERS GAS STANDPIPE

• Practical system with wide application
• Easy adaptation to many thread sizes, drilling saddles and fittings -directly or via electrically conductive tube
• Rapid extraction of gas by using the Venturi nozzle
• Flame arrestor for burning off the gas safely

ESDERS SAFE ETHANTEST

• Taking the service box to the measurement site
• Activate device and connect sensor
• Feed sensor into sensor hole and start analysis at the touch of a button
• SAFE absorbs a gas sample and displays its concentration in vol.%
• The gas sample passes through the chromatographic column and the display of methane and ethane (if applicable) takes place

ESDERS LECKOMIO EX

• Extremely rugged hand-held measurement device as an individual or combination instrument in aluminium casing with very-well protected LCD display
• Easy operation through menu technology and function keys guarantees problem-free use.
• Document tests by printing them on the thermal-printer through the IR interface
• Practice-orientated accessories for all applications

ESDERS SIGI EX FLAMMABLE GASES TESTER

• Improved sensor technology and adjustment options
• Increased operating temperature range of -20 to +50 ° C
• By up to 44% larger display area for better readability
• Red backlight for improved perception of alarm messages

ESDERS TONI GASTEST CH4 GAS LEAK DETECTOR WITH SENSOR ON THE GOOSENECK

• Measurement range: 0 - 10.000 ppm methane
• Very fast response time
• Robust, hand-held with IP64 protection
• vibration alarm and digital display
• Made in Germany