The DTI050 is an easy-to-use, fast response, low drift handheld temperature indicator with accuracy to ½ 0.012°C. The response time ensures precise monitoring of temperature stability and the low drift reduces uncertainty of measurement between calibration intervals. Works with both "smart" and standard temperature sensors.

Combine with our "smart" temperature reference sensors to become a fully traceable thermometer. Verify both dry-block and liquid bath temperature calibrators, or use in direct measurement of critical temperatures in a process environment.

Features:

One year accuracy to ½ 0.012°C
System accuracy with STS Series temperature sensors to ½ 0.04°C
Wide Temperature Range of -200 to 2500°C (-328 to 4532°F)
Resolution to 0.001°C
Wide selection of sensors (straight, 90°, cabled, etc.) to fit your application
Useful features like hold, and min / max
Power with a single 9V battery, or external 9V supply

More products AMETEK

AMETEK AMC910 PROCESS CALIBRATOR

• Read voltage (10V and 100V DC ranges to ½ 0.005%)
• Read current (0 to 50mA to ½ 0.01%)
• 24VDC loop power supply
• Selectable 250 ohm HART resistor

AMETEK WT SERIES DIGITAL PRESSURE GAUGE

• 0.1 % of reading accuracy
• Batteries and digital communications are accessible from the front
• Rugged "Wally Box" gauge can withstand dropping and accidental over-pressurization

AMETEK MACAL LOOP CALIBRATOR

• Source and Measure current to 24 mA with ½ 0.05% of full scale
• Measure voltage from 0 to 45 VDC with ½ 0.5 VDC
• 200 hours of life using 4 x AA batteries

AMETEK HPC600 PRESSURE CALIBRATOR

• Voltage Measurement
• Serial Communication
• External Pressure Module Compatibility

AMETEK XP2I-DP DIFFERENTIAL PRESSURE GAUGE

• Record 32 000 data points
• Battery-optimizing, Ultra Low Power (ULP) Mode
• Over an entire year of continuous recording time

AMETEK NVISION LAB REFERENCE RECORDER

• Gauge / Absolute Pressure Datalogger to 15 000 psi / 1000 bar / 100MPa
• Differential Pressure with up to 0.025% of reading accuracy
• Switch, Voltage, Current, and Temperature
• 500 000 data points - 10 readings per second from 2 modules

AMETEK CTC COMPACT TEMPERATURE CALIBRATOR

• Multi-hole and/or insert kits
• Input for external reference sensor on all C models
• MVI circuitry ensures stability despite mains supply variations

AMETEK CSC SERIES MULTIFUNCTION CALIBRATORS

• Measure Current to 24mA with ½ 0.01 % of reading accuracy
• Measure Voltage to 30VDC with ½ 0.01 % of reading accuracy
• 24VDC Loop Power Supply
• User defined step and ramp functions

AMETEK PTC PROFESSIONAL TEMPERATURE CALIBRATOR

• Temperature range from -90 to 660°C (-130 to 1220°F) with 5 models
• Accuracy to ½ 0.06°C and Stability to ½ 0.01°C
• Clean Dry block calibrator
• Time saving fast cooling and heating times (350° in only 7 minutes)

AMETEK T-900 SERIES (SYSTEMS A, B, AND H)

• Lightweight, compact design
• Two outlet ports
• Protected shuttle valve