Lab Reference Recorder

The nVision Lab Reference is a pressure reference recorder accurate enough to function as a laboratory deadweight tester replacement and a high-accuracy, high-frequency chart recorder. Download data as you test, view your data on the built-in LCD, and store up to 1,000,000 data points.

Features:

Gauge / Absolute Pressure Datalogger to 15 000 psi / 1000 bar / 100MPa
Differential Pressure with up to 0.025% of reading accuracy
Switch, Voltage, Current, and Temperature
500 000 data points - 10 readings per second from 2 modules

More products AMETEK

AMETEK WT SERIES DIGITAL PRESSURE GAUGE

• 0.1 % of reading accuracy
• Batteries and digital communications are accessible from the front
• Rugged "Wally Box" gauge can withstand dropping and accidental over-pressurization

AMETEK AMC910 PROCESS CALIBRATOR

• Read voltage (10V and 100V DC ranges to ½ 0.005%)
• Read current (0 to 50mA to ½ 0.01%)
• 24VDC loop power supply
• Selectable 250 ohm HART resistor

AMETEK NVISION LAB REFERENCE RECORDER

• Gauge / Absolute Pressure Datalogger to 15 000 psi / 1000 bar / 100MPa
• Differential Pressure with up to 0.025% of reading accuracy
• Switch, Voltage, Current, and Temperature
• 500 000 data points - 10 readings per second from 2 modules

AMETEK T-900 SERIES (SYSTEMS A, B, AND H)

• Lightweight, compact design
• Two outlet ports
• Protected shuttle valve

AMETEK XP2I-DP DIFFERENTIAL PRESSURE GAUGE

• Record 32 000 data points
• Battery-optimizing, Ultra Low Power (ULP) Mode
• Over an entire year of continuous recording time

AMETEK HPC600 PRESSURE CALIBRATOR

• Voltage Measurement
• Serial Communication
• External Pressure Module Compatibility

AMETEK ITC INDUSTRIAL TEMPERATURE CALIBRATOR

• Dry block calibrator
• Easy-to-read, backlit display with useful icons
• Lightweight and easy to carry
• Multi-hole insert kits

AMETEK CTC COMPACT TEMPERATURE CALIBRATOR

• Multi-hole and/or insert kits
• Input for external reference sensor on all C models
• MVI circuitry ensures stability despite mains supply variations

AMETEK 30 SERIES PRESSURE CALIBRATOR

• Indicates milliamps to calibrate transmitters
• Ultra compact and light
• Very easy to learn and use

AMETEK CSC SERIES MULTIFUNCTION CALIBRATORS

• Measure Current to 24mA with ½ 0.01 % of reading accuracy
• Measure Voltage to 30VDC with ½ 0.01 % of reading accuracy
• 24VDC Loop Power Supply
• User defined step and ramp functions