The AMC910 multi-purpose calibrator is the perfect solution for high precision process, temperature, and pressure calibrations, as it combines the power and features of a laboratory calibrator, with the addition of an isolated measurement channel. This flexibility means that only one electrical calibrator is needed to provide versatility, performance, and value.

In addition, you can store up to 9 set points for each output range, which can be selected manually, or automatically stepped at timed intervals. Operation is done through an intuitive, easy-to-operate user interface. For automatic production testing, computer control is available through RS232 or IEEE-488 interface.

Features:

Source voltage to 100V, with ½ 0.003% of reading
Source current to 100mA with ½ 0.005% of reading
Source / Read 13 thermocouples to ½ 0.14°C
Source 9 RTDs to ½ 0.05°C, and Read to ½ 0.02°C
Read pressure to ½ 0.025% of reading with APM external pressure modules

More products AMETEK

AMETEK PTC PROFESSIONAL TEMPERATURE CALIBRATOR

• Temperature range from -90 to 660°C (-130 to 1220°F) with 5 models
• Accuracy to ½ 0.06°C and Stability to ½ 0.01°C
• Clean Dry block calibrator
• Time saving fast cooling and heating times (350° in only 7 minutes)

AMETEK HPC600 PRESSURE CALIBRATOR

• Voltage Measurement
• Serial Communication
• External Pressure Module Compatibility

AMETEK DTI050 TEMPERATURE INDICATOR

• Wide selection of sensors (straight, 90°, cabled, etc.) to fit your application
• Useful features like hold, and min / max
• Power with a single 9V battery, or external 9V supply

AMETEK RTC REFERENCE TEMPERATURE CALIBRATOR

• Contamination free calibration of clamp sensors
• ½Plug and Play½ intelligent reference sensors
• Easy-to-read color display with User-friendly navigation
• Lightweight and easy to carry

AMETEK ASC-400 MULTIFUNCTION CALIBRATOR

• Recall saved tasks for both upper & lower windows
• Fuseless Protection
• Inputs for Thermocouple Calibration

AMETEK ETC EASY TEMPERATURE CALIBRATOR

• Accuracy to ½ 0.5°C and Stability to ½ 0.05°C
• Time saving fast cooling and heating times
• Easy-to-read multi-information display

AMETEK M1 DIGITAL PRESSURE GAUGE

• Easy to read extra-large numbers
• Protective boot included
• Shifts everyday wear to a replaceable CPF adapter

AMETEK 30 SERIES PRESSURE CALIBRATOR

• Indicates milliamps to calibrate transmitters
• Ultra compact and light
• Very easy to learn and use

AMETEK AMC910 PROCESS CALIBRATOR

• Read voltage (10V and 100V DC ranges to ½ 0.005%)
• Read current (0 to 50mA to ½ 0.01%)
• 24VDC loop power supply
• Selectable 250 ohm HART resistor

AMETEK CSC SERIES MULTIFUNCTION CALIBRATORS

• Measure Current to 24mA with ½ 0.01 % of reading accuracy
• Measure Voltage to 30VDC with ½ 0.01 % of reading accuracy
• 24VDC Loop Power Supply
• User defined step and ramp functions