USB Remote Spectrum Analyzer for High Frequencies 10MHz..6GHz Aaronia HF6060X

• Worlds first 9kHz to 6GHz Handheld Isotropic Antenna
• Suitable for any Spectrum Analyzer
• High Gain and Low Noise
• Built-in Bypass Preamplifier
• Manual or Automatic Axis Switch
• Battery or DC Powered
• Incl. Control Software

 

• RF frequency range: 10MHz to 6GHz
• DANL: -135dBm(1Hz)
• DANL with Preamp: -150dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 3kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM

 

• Frequency range: 10Hz to 10kHz
• Magnetic field (Tesla): 1pT to 100µT (typ.)
• Magnetic field (Gauss): 100µG to 1G (typ.)
• Electric field: 1V/m to 2.000V/m (typ.)
• Resolution (RBW): 1Hz to 3kHz (1-3-10 step)
• Units: V/m, T, G, A/m
• Interface: USB 2.0/1.1

 

• Compatible with any Spectrum Analyzer brand
• Design: Directional Logarithmic-Periodic
• Frequency range: 380MHz to 8GHz
• Max. input power: 100W AM (400MHz)
• Nominal impedance: 50 Ohm
• VSWR: <1:2,5 (typ.)
• Gain: 5dBi (typ.)

 

• Spectran HF-80120 V5 (9kHz - 12GHz) Real-Time Handheld Spectrum Analyzer
• Frequency range: 9kHz to 12GHz
• Up to 175MHz Real-Time bandwidth
• POI below 1µS
• Real-time I/Q streaming via USB
• Very fast sweep mode, scans 20GHz in less than 20mS (in preparation)

 

• Frequency range: 1Hz to 1MHz (30MHz)
• Analog Input: 200nV to 200mV (typ.)
• Resolution (RBW): 0,3Hz to 1MHz(1-3-10 step)
• Units: Volt
• Detectors: RMS, Min/Max
• Demodulator: AM, FM

 

• Worlds first 9kHz to 40GHz 3D Tracking-antenna
• Perfect for wideband, real-time spectrum monitoring
• Ultra high Tracking-Accuracy (up to 4x16 sectors)
• Very high IP3 of 40dBm (versions without pre-amp)
• Extremely fast Tracking-Speed (up to 1µS)
• Glitch free high-end digital RF-switches
• Up to 64 independent RF-Antennas
• Cascadable system (16 to 64 antennas)

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (radial isotropic)
• Frequency range: 30MHz to 1GHz
• Max. input power: 5W AM (100MHz)
• Nominal impedance: 50 Ohm
• Gain: -9dBi (@100MHz)

 

• Design: Omni-Directional (radial isotropic)
• Frequency range: 700MHz to 2,5GHz
• Max. input power: 40W AM (800MHz)
• Nominal impedance: 50 Ohm
• Gain: -2Bi to 2dBi (typ.)
• Antenna factor: See data sheet graph
• RF connection: SMA (m) or N (see optional adapter)

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (biconical dipole)
• Frequency range: 20MHz to 1GHz
• Max. output power: 100mW AM
• Nominal impedance: 50 Ohm
• Gain: -5dBi to 41dBi