The new IsoLOG 3D Mobile, Aaronia’s latest development, is an ultra light and small isotropic antenna which is compatible to any spectrum analyzer. It just works on the fly and is a perfect plug and play solution for 3D measurements in limited time frames. The antenna requires no software installation, no power connection and no hardware changes. It is connectable via the N (male) connector to any analyzer or oscilloscope.

Each IsoLOG 3D Mobile includes an internal, rechargeable battery, offering a run-time of 6 hours, and a switchable low noise bypass preamplifier. The integrated amp allows measurements of very low-powered signals. Thus, used in bypass mode, the antenna is still usable for high field-strengths. The control of the antenna is done via USB or via manual antenna selection mode, requiring no USB connection.

Aaronia also integrated an ultra fast adjustable �chopper" function. Using special, glitch free RF switches this feature offers an automatic endless antenna rotation/selection with a switching duration of up to 50kHz. This feature transforms the IsoLOG 3D Mobile into a fully functional 3D antenna without the need of any USB software control.

Shipped in a waterproof transport-case, accompanied with a pistol grip with tripod functionality, the scope of delivery leaves nothing to be desire.

Made in Germany:

All Aaronia antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standards so that Aaronia can offer every customer a full 10 years warranty for all EMC antennas.

Examples for possible analysis and measurements within frequency range (9kHz - 3GHz):

Unwanted Surveillance Signals
Tetra/BOS
ISM434
LTE800
ISM868
GSM900
GSM1800
GSM1900
DECT
UMTS
WLAN
Microwave
Bluetooth
WiFi
LTE2.6
WiMAX
Directional Radio
etc.

Standard accessories

Included in delivery

Handheld Isotropic Antenna IsoLOG 3D Mobile

Pistol Grip with Tripod Function

Waterproof Transport-Case

SMA to N Adapter

Power Supply

More products AARONIA

SPECTRUM ANALYZER FOR RADIO-FREQUENCY 10MHZ..6GHZ AARONIA SPECTRAN HF6060

• RF frequency range: 10MHz to 6GHz
• DANL: -135dBm(1Hz)
• DANL with Preamp: -150dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 3kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM

AARONIA MDF 560 MAGNETIC FIELD TRACKING ANTENNA 500KHZ..60MHZ

• Compatible with any Spectrum Analyzer brand
• Design: Loop
• Frequency Range: 500kHz - 60MHz (1MHz - 40MHz with max. +/- 0,3dB deviation)
• Max. input level: 5W (usable as transmitting antenna)
• Conversion factor: 1 (0 dB A/m is 0dBm)
• Impedance: 50 Ohm
• RF connector: SMA (female)

AARONIA POWERLOG 40400 MICROWAVE HORN ANTENNA 4GHZ..40GHZ

• Compatible with any Spectrum Analyzer brand
• Design: Horn antenna
• Frequency range: 4GHz - 40GHz (usable & directional from 700MHz up, specific calibration data from 18GHz up)
• Max. input power: 300W (peak)
• Nominal impedance: 50 Ohm
• Gain: up to 17dBi

LOW COST HANDHELD SPECTRUM ANALYZER 100MHZ..4GHZ AARONIA SPECTRAN HF4040

• Frequency range: 100MHz to 4GHz
• Amplitude: -90dBm to 0dBm (typ.)
• Lowest sample time: 100mS
• Resolution (RBW): 100kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Pulse
• Input: 50 Ohm SMA RF-input (f)
• Interface: USB 2.0/1.1

AARONIA OMNILOG 70600 OMNI-DIRECTIONAL ISOTRPIC RADIAL ANTENNA 680MHZ..6GHZ

• Design: Omni-Directional (radial isotropic)
• Polarization: Linear
• Frequency range: 700MHz - 6GHz
• Impedance: 50 Ohms

ACTIVE BICONICAL EMC BROADBAND ANTENNA 30MHZ..1GHZ AARONIA BICOLOG 30100X

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (radial isotropic)
• Frequency range: 30MHz to 1GHz
• Max. Output power: 100mW AM
• Nominal impedance: 50 Ohm
• Gain: 1dBi to 41dBi

RF SPECTRUM ANALYZER 10MHZ..8GHZ AARONIA SPECTRAN HF6080

• Frequency range: 10MHz to 8GHz
• DANL: -145dBm(1Hz)
• DANL with Preamp: -160dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 1kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM, PM

EMI & EMC TEST BROADBAND ANTENNA 20MHZ..3GHZ AARONIA HYPERLOG 20300

• Compatible with any Spectrum Analyzer brand
• Design: Biconical & Logarithmic-Periodic (combination)
• Frequency range: 20MHz to 3GHz
• Max. input power: 310W AM
• Immunity test field strength:10V/mm
• Nominal impedance: 50 Ohm
• Accuracy: 0,3dB
• VSWR: <2:1 (typ.)
• Gain: 6dBi (typ.)

AARONIA MAGNOTRACKER ELF-6 MAGNETIC FIELD TRACKING ANTENNA ELF, SLF & ULF 1HZ..9KHZ

• ELF, SLF and ULF Magnetic Field Tracking Antenna
• Frequency Range: 1Hz - 9kHz
• Design: Ferrite core, Active
• Internal Amplifier: 25dB (optional 35dB), battery powered (3-4 hours) or continuosly powered via included power supply
• Impedance: 50 Ohm
• RF connector: SMA (female), optional N connector

BICONICAL EMC TEST BROADBAND ANTENNA 20MHZ..1GHZ AARONIA BICOLOG 20100

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (biconical dipole)
• Frequency range: 20MHz to 1GHz
• Max. input power: 5W AM (100MHz)
• Nominal impedance: 50 Ohm
• Gain: -18dBi (@100MHz)